✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools! ➡ Get instant access to 16,000 projects now bit.ly/16000Plans-Projects ✅✅ How to launch your own Woodworking Business for under $1000 and Make until $150,000 a yers. ➡Step-by-step guide bit.ly/woodprofits-joineryforbeginners Our channel intends to always bring the best content about woodworking for beginners, as well as DIY and craft ideas. We do our best to have new videos weekly. So in order not to miss any news, subscribe to our channel, activate the bell to receive all notifications. ➡ Also visit our Pallet Projects channel: ruclips.net/channel/UCqwbFdaNKeeLVHNUTE3aQfg
So you made an adjustable jig by repurposing scrap for precise laps! Uses up scrap wood and saves on the fuel for transportation...the environment thanks you and this beginner does too!
you can order a tool like this and it is metal and it dont cost alot either. i have one. it was on a youtube channel also reviewing china tools, cheap but good. thats how i learned about it.
@@WillWoodDiywoodworking « Thank you » but you don’t answer to the question. Très poli mais finalement très impoli puisque en ignorant la question, vous méprisez en quelque sorte votre interlocuteur. Et comme d’habitude, pas du tout pour un « débutant » !!!
Amigo buenas tardes te quiero preguntar cuando hago cortes con mi sierra circular al terminar el corte corta más al final porque será te agradezco mucho tu respuesta.
What this jig does is crosscut a dado, half lap, or groove in a way that is repeatable and precise. If you have a lot of these joints to cut it will go fast once you setup the jig.
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools!
➡ Get instant access to 16,000 projects now bit.ly/16000Plans-Projects
✅✅ How to launch your own Woodworking Business for under $1000 and Make until $150,000 a yers.
➡Step-by-step guide bit.ly/woodprofits-joineryforbeginners
Our channel intends to always bring the best content about woodworking for beginners, as well as DIY and craft ideas. We do our best to have new videos weekly. So in order not to miss any news, subscribe to our channel, activate the bell to receive all notifications.
➡ Also visit our Pallet Projects channel: ruclips.net/channel/UCqwbFdaNKeeLVHNUTE3aQfg
,,,;;
Thats a great idea. Well executed
Thank you for watching and leaving your comment 😉👍🙏
,a cool video keep up the great content.. Thank you……
Thank you for watching and leaving your comment 😉👍🙏
@@WillWoodDiywoodworking Thank you very mutch... have a nice start of the Week.... see you….
Muito bacana ficou excelente seu projeto solução para encaixes com precisão foi uma ótima apresentação e muito boa à demonstração valeu obrigadao 🎉🎉🎉
😉👍🙏🙏
So you made an adjustable jig by repurposing scrap for precise laps! Uses up scrap wood and saves on the fuel for transportation...the environment thanks you and this beginner does too!
you can order a tool like this and it is metal and it dont cost alot either. i have one. it was on a youtube channel also reviewing china tools, cheap but good. thats how i learned about it.
MM77 Approved 👍🏼👍🏼
😉👍🙏
Оригинально!
Muy bueno y simple...pero se entiende poco su función en el video, podrías hacer un short o un video que se muestre más detallado su uso?
Thank you for watching and leaving your comment 😉👍🙏
@@WillWoodDiywoodworking
« Thank you » but you don’t answer to the question.
Très poli mais finalement très impoli puisque en ignorant la question, vous méprisez en quelque sorte votre interlocuteur.
Et comme d’habitude, pas du tout pour un « débutant » !!!
Ah! Agora entendi...
Jig fantástico, Will! Valeu mesmo!!! 😃
Abraços e se mantenha seguro aí com sua família! 🖖😊
Obrigado amigo! Tenha um ótimo dia. Cuide-se sempre. Abraço 😉👍🙏
EXCELENTE.... UM GRANDE ABRAÇO
Valeu amigo. Obrigado por assistir e deixar seu comentário 😉👍🙏
Amigo buenas tardes te quiero preguntar cuando hago cortes con mi sierra circular al terminar el corte corta más al final porque será te agradezco mucho tu respuesta.
al repasar con el disco le dio holgura en demasía 👌👍
Thank you for watching and leaving your comment 😉👍🙏
be nice to know what you are doing, by telling us vocally, telling us as you are doing it!!!!
Anyone else noticed he changed which piece had the stop glued to it between 2:30 and 3:15...
What does it actually do?
Totaly unnecessery.
you can order a tool like this made out of metal, this is not his design. i have had one for alot of years now.
It is a kind of clamping aids. I think.
What this jig does is crosscut a dado, half lap, or groove in a way that is repeatable and precise.
If you have a lot of these joints to cut it will go fast once you setup the jig.
Кто-нибудь подскажите, пожалуйста, что за клей используется? Почему ещё и капать каким-то компонентом надо?
Ну почему все делают сначала ролик а потом пояснения что это. Ну не по людски. Такие ролики в бан!
Or just get a router
No entendi
Veo no trabajar con norma
YET ANOTHER WASTE OF TIME PROJECT WHY
ALL THAT WORK GEEZ
What would you suggest as an alternative?
Assuming you have multiple joints to cut how would you do it?
Waste of time
Why is this a waste of time?
How do you make these types of cuts?
That was a total waste of time
I have a tool similar to this and found it makes life much easier - especially if I'm making a lot of cuts.
I use it all the time.