Thanks for this! I'll be saving this as reference as I'm saving up for one and trying to see if I could turn it into an AK-104 when more aftermarket parts are released. Or at least an AK-103. Looking forward to the performance results.
@@kavaliax Hi again! How's the build going so far? Finally got my TM AKM but decided to go a mix of modern and classic wood. I noticed you used the Bow Master High Power rocket valve if I'm not mistaken. How's the FPS with it + the barrel you are using?
@@8man_01 if you're going with the stock inner then it's gonna go up to 1.6Joules but j highly recommend you don't cause your mags will run out of gas before emptying the rounds. I have specifically a shortly Recoil rod with lower power spring to reduce gas consumption. as well as snipping a section of the fill tube down in the magazine for more gas. and it's barely finishing the whole mag. highly recommend you not to if you want good consistency
@@kavaliax Thanks! I decided to get a high powered rocket valve but the MWC one plus a 350mm EdGI Barrel. I can finish a mag using Puff Dino 12kg but I think it's because I live in a hot climate. I'm pretty sure it's hitting beyond 1.6J haha won't ever use this in a game unless i swap back the stock valve.
There's no need to undo the small screw for the selector. Push the hammer sear forward and down and the full selector lever will rotate until it fits the keyhole in the body.
hey sorry, my vid got blocked at that part due to copy right music, uh which part are you stuck on theres two receiver screws that holds the "gas block", take those off (you might need to get a torch gun and heat those screws up first cuz theres alot of loctite on there), and then you gotta remove the pins on the gas block to fully remove the outter barrel. email me i'll send you the screen shots kavaliax@gmail.com
![[GUNTANK] 마루이 AKM GBB + DYTAC SLR 6.5인치 컨버전키트 장착영상입니다.](/img/1.gif)
Thanks for this! I'll be saving this as reference as I'm saving up for one and trying to see if I could turn it into an AK-104 when more aftermarket parts are released. Or at least an AK-103. Looking forward to the performance results.
glad it helps :) will do some inner upgrade reviews later this week or so
@@kavaliax Hi again! How's the build going so far? Finally got my TM AKM but decided to go a mix of modern and classic wood. I noticed you used the Bow Master High Power rocket valve if I'm not mistaken. How's the FPS with it + the barrel you are using?
@@8man_01 if you're going with the stock inner then it's gonna go up to 1.6Joules but j highly recommend you don't cause your mags will run out of gas before emptying the rounds.
I have specifically a shortly Recoil rod with lower power spring to reduce gas consumption. as well as snipping a section of the fill tube down in the magazine for more gas. and it's barely finishing the whole mag.
highly recommend you not to if you want good consistency
@@kavaliax Thanks! I decided to get a high powered rocket valve but the MWC one plus a 350mm EdGI Barrel. I can finish a mag using Puff Dino 12kg but I think it's because I live in a hot climate. I'm pretty sure it's hitting beyond 1.6J haha won't ever use this in a game unless i swap back the stock valve.
Thank you, very helpful
you're welcome! hope it helps!
music is a bit too loud and can't hear you in parts of the video
niceeeee
enjoy
There's no need to undo the small screw for the selector. Push the hammer sear forward and down and the full selector lever will rotate until it fits the keyhole in the body.
Yeh i know, I just did it for the sake of people wanting to change the selector as well
that's a handsome looking ak
INDEED :D waiting for those accessories to arrive now :) and the dust cover
May I ask how to disassembly the original outer barrel pls?
hey sorry, my vid got blocked at that part due to copy right music, uh which part are you stuck on theres two receiver screws that holds the "gas block", take those off (you might need to get a torch gun and heat those screws up first cuz theres alot of loctite on there), and then you gotta remove the pins on the gas block to fully remove the outter barrel. email me i'll send you the screen shots kavaliax@gmail.com
ah sorry just noticed my video first 3 stages of removing the handguard got removed due to copy right music flag
is the sharp bro receiver better than the marui one？
receiver coating scratches out easier than stock. but definitely lighter on material and cuts.
is the grip for AEG gun?
mine was for gbb but I think they both fit on this aftermarket body.