I am new to your channel I just wanted to say I like your channel. I love the doggies the are pretty and naughty. Your accent is great. Thank you for the great videos.
To get the linkage arms higher to be out the way of the pto shaft, pull the pin out the bottom of the adjuster arm, then lift the linkage arm up and put the pin back in below it, just remember to put it back before using any 3pt linkage equipment
Your cans are sealed using a seamer. The lids drop down and the ‘rolls’ start the seaming process. 1st op roll does 90% of the seam. The 2nd op roll polishes the seam off. It’s a very intricate process of seaming any can correctly. 👍🏻
Fendt have those clips on the bottom of the down arm,take the pin out,push the clip in and lift the arm 6inches. It will stay like that until you change it. The pin you take out goes in the sidearm bracket
Absolutely Brilliant Crawford!!! Great Video as always! Never Ever Again, Will we drive up the A9 from East Kilbride and not juke in to Gloagburn farm shop. Those haggis and pork scotch eggs are to Die For, and the Missus Has been Raving about the Best sausage roll on the planet! She didn't even gee me a bit!😢 She ate it next day when I was at work. 😕 Anyway, All the very best Amigo!! From Diane & Stevie. ps. We'll probably fire up one dreary day just for Fantastic Grub + Sh!ts n Gigs!! 😂👍🏻👍🏻🏴
Imagine that canning machine after the other machines that actually makes the empty cans and lids before they are filled. That's what companies such as Coca Cola, Pepsi use, the can manufacturing plant is next to the product manufacturing plant. They will produce 6,000 cans a minute ready for filling! Its an amazing sight seeing one at full chat, so much precision to ensure every can is the same and doesn't leak.
I tried the air tags, work fine in a city I assume, but useless if they aren’t in range of an iPhone. When I tested it just kept showing the dog as being beside me as that was the last phone the AirTag connected with😂
Did you consider splitting calving to spread out when they will finish? Guessing it fits in better with other jobs on the farm. What’s this fantasy about Scotland scoring? 😂
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
Hi Crawford, last vid 12 days ago, where are you?
Bring back content 😭 depressing without crawfords farm
Hope all is ok, missed the videos
Hi Crawford,Hope everything is ok with you and the gate lady and the family.
Hi Crawford, missing the vid hope you are all ok .
Have to say, that was cool! Fun to watch thanks!
Damn you are really smashing it with the musical edits Crawford 😁
Cheers
What an excellent machinery reveal! Best of luck with the new baler!
I am new to your channel I just wanted to say I like your channel. I love the doggies the are pretty and naughty. Your accent is great. Thank you for the great videos.
Interesting to see the canning process at the brewery. Hope your pups stop wandering. Nice baler.
Excellent choice of baler, we've got a v6 ,by far the best baler by far ,feed it hard itl make a better bale
Great to meet you and Gate Lady briefly at the Royal Highland Show this morning .
Hope you enjoyed the Show.😊
The canning process is excellent piece of kit ❤
Good luck with the new baler. The brewery there has a nice system working. 👍🏴🇺🇸
Amazing to watch the production line, ‘I’m driving hic’ busy times ahead I’m on catch up, few night shifts now to flip body clock, great blog]
To get the linkage arms higher to be out the way of the pto shaft, pull the pin out the bottom of the adjuster arm, then lift the linkage arm up and put the pin back in below it, just remember to put it back before using any 3pt linkage equipment
Hopefully everything is okay. Missing your videos,come back soon
Well done.. Congratulations!
Had our first can of Bandit beer, very nice.. Alwaysl ook forward to your videos.
We run the same drawer bar on our baler and we put the linkage all the way down so the linkage don’t hit and bend the PTO shaft
Brill vlog Crawford…love the humour and well done on ur Bandit Beer sales 🎉
Great video Crawford aye you can’t go wrong with an Irish made bailer 💪🇮🇪👌
JUST HAD MY BANDIT BEER🎉😂❤THANKS TO YOU ALL 🍺🍺😋🤗
McHale are great balers. Very popular here in Ireland.
Hay, straw, silage, they make great bales.
What a herd ❤ best I have seen on the RUclips you should be well proud of them ❤❤❤
Your cans are sealed using a seamer. The lids drop down and the ‘rolls’ start the seaming process. 1st op roll does 90% of the seam. The 2nd op roll polishes the seam off. It’s a very intricate process of seaming any can correctly. 👍🏻
Great baler. Best of luck with it.
Great video Crawford
Fendt have those clips on the bottom of the down arm,take the pin out,push the clip in and lift the arm 6inches.
It will stay like that until you change it.
The pin you take out goes in the sidearm bracket
What a tune to start with ❤
Got my bandit beer ready for visitors, from England, see what they think 🤔
I really think you made a good choice 👏🏻
Loved watching the Bandit Beer - wish I could get some in Houston, Texas 🥵
Absolutely Brilliant Crawford!!! Great Video as always! Never Ever Again, Will we drive up the A9 from East Kilbride and not juke in to Gloagburn farm shop. Those haggis and pork scotch eggs are to Die For, and the Missus Has been Raving about the Best sausage roll on the planet! She didn't even gee me a bit!😢 She ate it next day when I was at work. 😕 Anyway, All the very best Amigo!! From Diane & Stevie. ps. We'll probably fire up one dreary day just for Fantastic Grub + Sh!ts n Gigs!! 😂👍🏻👍🏻🏴
Imagine that canning machine after the other machines that actually makes the empty cans and lids before they are filled. That's what companies such as Coca Cola, Pepsi use, the can manufacturing plant is next to the product manufacturing plant.
They will produce 6,000 cans a minute ready for filling! Its an amazing sight seeing one at full chat, so much precision to ensure every can is the same and doesn't leak.
Warm the squeaky pivot with the gas to soften any hard grease stopping fresh grease getting in.
The new brew has more flavour, nice canning line. Arrived Monday. Baler should work well for you.
Glad you enjoyed it 🍺 hope so
Be in Tuesday to pick up my bandit beer n sticky toffee pudding ,yaaa belter cant wait to try it
Great video I drive for Rogers as well 👍
Love a bit of underworld 😊
Went passed the other day the new shed looks awesome from the road
Aye shes a belter
surely you'll need some Bandit Beer for the reception
'Angle of the dangle' - I love AvE too bro :)
Kev will be excited getting a new toy better make sure he's not on bandit beer the night before he has a shot😂
We are coming in past on Saturday, hope there's some beer left
Dont you worry, it will be waiting for you
Hid a great breakfast, spent a fortune in the farmshop inc a case of the beer. It went down very well at the barbecue in Edinburgh.
Farm looks well.
Glad you enjoy thanks for visiting
Sweet cider 🍺
Thankyou for playing. I want a case for me and me bro. Is there any good barley brew. Its darker better shugers and i love a good ale.
Great video
good guess on my part!
we saw that straw chopper at the highland show
Get some trackers on your labs collars. Then you can track them on your mobile.
Pet GPS / AirTags on their collars since they are known adventurers would surely help…
Might have to
I tried the air tags, work fine in a city I assume, but useless if they aren’t in range of an iPhone.
When I tested it just kept showing the dog as being beside me as that was the last phone the AirTag connected with😂
@@CrawfordsFarm1 We use a Tractive tracker on our dog, haven’t had a problem in the 5 or so years we’ve used them.
Ye I bough an AirTag for the dog, only showed when it was last next to me, that’s no good 👎😂
@@CrawfordsFarm1do you know when the 🐑🐑🐑🐑🐑are getting sheared now
Can’t beat mchales equipment ,,
Everything ok Crawford ?
You’ll be lucky to get cows in calf on first service with the ceeda normally it’s 42 days after calving they’ll take but good luck anyway
Good to know thanks
Best of Kit the McHale
Wonder if I'll get my 2 cases before Scotland go out the Euros 😂
😡
Great video 😊best baler money can buy 😊
Hope its a good buy
Haven't heard Born Slippy in a long time
Great tune
Are you at the highland show tomorrow?
Nope
What Does gate lady think of bandit beer Dutch? She's like a can now and then.
WHT IBM? I?😊😊😊😊
When did you say the wedding was? Is that why you are away?
Would u send it to us in IRELAND
You will find the Mchale away better bailer than the Claas Crawford, especially in grass 👍🏻
Just ordered my case of bandit
Bit like the wonky calf 😂
Me: has he uploaded a new video yet ??
you need to get Mike the bull down the road
Must be doing something wrong, don't seem to get wagon drivers to sweep for me
Wtf r u. That's all. Much love.
Where's Crawford, is he in hiding drinking all that Bandit Beer 🍺
Could of picked a better baler out Mchale hasn’t missed a beat and hoovers up anything you chuck at it
Where's Crawford,has he drank all the beer ? Bandit.
Retired
👀🙄🐾👍
Nobody getting free beer then ……. 😂
A belt bailer willnt be much good in wet grass
Do you know the 🐑🐑🐑🐑🐑are getting sheared now
Did you consider splitting calving to spread out when they will finish? Guessing it fits in better with other jobs on the farm.
What’s this fantasy about Scotland scoring? 😂
Are the orders skyrocketing?
get them dogs sorted before you lose one or both of them ... come on man youd be gutted
@Crawfordsfarm1 omg please i getting withdrawal lol no video for 2 weeks lol ..