If I'm not wrong, the coil on one side of the stator is tied with the coil on the opposite side. This means when you have a S magnet at one side and a N magnet at its opposite site, both will induce opposite magnetic fields, resulting in one cancelling the other, and consequently, the voltage at the stator will always be zero, no matter which phases you measure. You see, when you measure at the exits, the voltimeter don't even oscilate, which means charges are cancelling each other. Try to make it with the alternator rotor, which has 12 poles instead of 6.
U have 4 poles on ur rotor that means at any rotor position u have to almoust fully cover 1/4 surface of ur stator with the magnetic field (thats why the surface of ur coil winding on stator should match the surface of ur pole/magnet. If that stator is from 24v alternator should have 36 poles with 3 sets of windings for 3 phases and 12 poles/magnets on the rotor. Stick with the original setup or rewind ur stator matching the surface of pole and pole number on the rotor. Ur setup needs on the rotor at least 6 poles to generate some power and 12 to generate what is intendet to. I like ur work very much is clean but.....u may have some missing info in generating power and dont think u did that on purpose of discouraging other people to try. Keep it up!!!
If you are going to disprove someone's experiment my friend, you need to do it exactly as how they did it, as slight variations can have different results. Only then you can say that what they did does not work.
Don’t blame the test results for such setup. If you want to get 230V.A.C the copper awg of the alternator should be far smaller so to achieve a bigger number of turns on the stator windings hence the bigger EMF generated. Have you searched FTC generators.
The drive motor has 2 poles. And is the modified generator 2 poles? If so, try with only two poles, north and south. Voltage cannot be generated because it is offset by the magnetism next to it. I made the same mistake and after fixing it generated power. Please do not give up. がんばって👍
2 things that are missing or incorrect is the number of magnets vs the poles in the stator. the size of the magnets have to corelate aswell. the last major thing is the flywheel. That's imperative, it stores the momentum of the inital spin long enough to get things started. Other than that great attempt.
This will only be maximum at 16-18 V if the circuit is delta, and maximum at 24-32V if the circuit is star. This has not changed the pulley for the drive motor. Good Job.
suggestion: measure input amperage to electric motor. Compare that to output amperage of generator. even if you cannot start it with a role using magnets will save 5-10 amps from the generator that can be used elsewhere
Hello friend, I congratulate you, it is an excellent video. But for it to work 100%, your generator has to have 6 North poles and 6 South poles of a total of 12 neodymium magnets, otherwise it will NOT work. From there everything is well done 👏 greetings from Honduras 🇭🇳 Blessings and much success
Try to modify by adding running capacitor. Capacitor can store current same as battery. Instead of fan belt try to lathe a shafting to connect two motor shaft. Fan belt is adding weight to its Rpm.
you are using DC alternator with the AC motor you must using the DC motor with DC alternator or AC m and ACalternator; and the rotor and the stator they must have a smolest space between them
The electric generator that you have did its wrong because the diameter of the rotor or stator is not the same size (the distance between the 2 element are different:)thats why it doesn't generate electricity.
saludos de Cuba estube mirando varios videos incluso el mi viral y por un momento. estube desconcertado y casi termino creyendolo y gracias a ti aclaro mis dudas, soy electricista industrial pero no tengo recursos para esos experimentos y aca en cuba hace mucha falta tecnologia ignobadora para resolver la crisis energetica , creo el mejor video es el tuyo , mi analisis me recuerda algunos principios aprendidos y la verdad que este proyecto no es posible si no se hace girar el alternador a 1000 rpm para poder suministrar el voltage de arranque del motor y no es posible alcanzar esa velocidad con el impulso de la cuerda. ahora bien solo falta hacer la prueba impulsando con potencia mecanica y una ves logrado medir el voltaje generado porque es la otra duda que tengo que sea capaz de generar 220 v
is wrong you have to switch your motor to rotoverter and put a flywheel calculating the consumption of the engine in the weight of the flywheel plus the loads you will add 👍🇧🇷🇧🇷
Dude , you should Winding the car's alternator coil to 220 volts. Because with what you did not more than 24 volts of electricity will be produced, which cannot power the other alternator and will not work
...in the sense of deterring anyone from wanting to build this rig, pretty good. However, the motor on the mains turned in the exact opposite direction to when you pulled the rope, so you didn't discourage me from trying to build it. I'm sorry, but if you're being paid by the patent owner to make deliberate fakes, this didn't quite work out.
E visto varios vídeos tuyos y desde el primero vi que tienes en cuenta la técnica pero olvidas las matemáticas y sin la fórmula y variables correctas no hay ecuación y sin ecuación no hay nada,Saludos
and if you connected large capacitors, like batteries, between the generator and the engine, it would only take a few seconds to switch to power from the generator, it is possible_???
A saw many videos about this, where real parole with real knowledge has try this to prove that’s doesn’t work, thanks for You to prove that scam is a scam 🥰
Tak umnie działa samo chodzi i żeby działało sprawdzi czy ma powyrzej 50 Hz inaczej nie zadziała kup se miernik do mierzenia częstotliwości bo przy 40 paru hercach nie zadziała będzie się zatrzymywał i prądnica powinna podawać 230 v
Спасибо что развеял миф. Возьми полноценный классический бензиновый генератор, на 4-5 кВт, и вместо двигателя внутреннего сгорания поставь электродвигатель, тот который в видео на 1-1.5 кВт. Интересно получится ли вечный двигатель при такой компоновке, и вообще запустится ли система? Такой эксперимент точно развеет все мифы!
@@engineer_peter По моему там вольтаж и чистота (Hz) и обороты должны один в один совпадать… кто-то писал вроде. Спасибо огромное за ваш труд высококлассный!!!
Hola quisiera informarte qué un alternador cuenta con 12 polos por lo que debes ponerle al rotor, 12 imágenes. De lo contrario no te va a funcionar. Si tienes alguna duda, consulta. Preguntando se llega a Roma.
Usted tiene toda la razón 👏 amigo. Si el aumentará la cantidad de imanes permanente a 12 polos le va trabajar al 100% muy bien. Ya que el número de bobinas en total son 18 y por cada fase lleva 6 bobinas. En cada bobina tiene que llevar un polo N y 6 polos S. Yo estoy haciendo también un generador así convirtiendo un Motor trifasico de 5hp a Generador con 🧲 imanes permanente Neodymium 50x25x10 cm. Y también el embobinado tuve que modificarlo. Saludos desde Honduras 🇭🇳 colegas bendiciones.
Several reasons why your model will not work: 1. You did not force glue together two opposing magnets in alternating sequences. Two magnets with both north poles glued together and alternated in every other slot with two magnets glued with south poles together. This creates a zero point of magnetism. Force the magnets together in a vice to force glue them together. 2. More importantly, you did not epoxy the magnets in place. Resin has living energy properties that when pulsed will balance electro magnetism with orgone energy from out of the æther. Purity of resin and differing types of resin is also a factor. This was discovered twenty years ago when lots of people had experimented with homemade "orgonite" of which the original inventor, Karl Hans Welz, brought copyright lawsuits against "SimpleEnigma" and the Cloudbuster and Orgonite forums. Back in 1994, I met Karl Hans Welz and he showed me his newly invented orgonite. Twenty years ago, I reinvented Wilhelm Reich's cloudbuster using knowledge that I had from Karl Hanz Welz along with Trevor James Constable's research and book "Cosmic Pulse of Life" and the experiments of Don and Carol Croft. Since then, "chemtrails" have been mostly debunked however sky pollution still persists and the hundreds of Croft cloudbusters created did very little to actually clean up the skies. Since I did not copy the Croft designs but rather designed my own cloudbuster, I created the worlds most powerful cloudbuster which I demonstrated to a few skeptics as I engineered steering a hurricane in september of 2017 back around in a full circle and along the coast toward New York as a mild hurricane exactly as I said I was going to do two days prior (ætheric forces within the orgone envelope of the atmospheric water vapor takes a few hours to a couple of days for the orgone energy to build up). My cloudbuster design far exceeds what has been previously invented by anyone else and has a functional range between 650 miles and 3,000 miles. Besides steering two hurricanes, I have used this prototype to save someones life by transmitting orgone energy and homeopathic energy 30 miles away as she had full organ failure on life support in the ICU. Three days it took to reactivate her lungs and another seven days to reactivate her kidneys. Both times an unexpected el níno heated up the atlantic ocean back in 2014. Also, Wilhelm Reich had originally invented this orgone motor back in the 1950's which never was published due to him dying in prison. It is important to not only understand electro magnetism, but also ætheric physics which provides the living energies flowing on earth. Orgone energy pulsates along surfaces and is generated from organic based materials and is activated when spun and pulsed with electromagnetism. The orgone motor is a closed loop that balances electromagnetism with orgone energy. It is not perpetual motion, nor is it free energy. Orgone energy accumulates from the seven æthers and does in fact have a capacity threshold whereby living energy becomes dead energy which Reich called DOR. Also know that orgone motors do not function everwhere all the time. Orgone motors functions best when there is a nearby flowing creek or river, pond or a lake that has lots of living things in it. Whenever an orgone motor fails to work, the motor can be activated from welding a brass water faucet and screwing on an empty organic rubber hose with the other end placed in a bucket of rain water or creek water (non flowing ponds and lakes could be used but best to place the hose in the pond or lake instead of a bucket). Also, a ground wire might be needed to balance the electromagnetism. Also know that various types of metals are either projective or receptive of orgone energy which differs from the list of non magnetic metals. Copper and silver are receptive metals whereas brass, aluminum, steel and gold are projective metals of pulsating accumulative orgone energy. On the old orgonite forums, someone discovered that when putting a vacuum cleaner motor/rotor that has orgonite (machine metal shavings and epoxy resin) and an undisclosed crystal onto the external shaft that when plugged in and turned on had caused several transformers in his block to blow a fuse. I have never conducted that experiment, but I did experience blowing my transfomers fuse twice from my orgonite of my dismantled ultra cloudbuster. Other discoveries included orgonite density and scalar orgonite. My discovery of which I never disclosed publicly, was in phase conjugating orgone energy itself into a zero point longitudinal beam without using magnets. Opposing magnets force glued together within epoxy however is another type of phase conjugating the magnetic and orgone states. Pulsing and spinning is what activates orgone energy and was first discovered by Karl Hans Welz which I witnessed back in 1994.
I'm from Slovakia, I'll give you a link to the website where I bought it. maybe you can find something similar in your country. eshop.haberkorn.cz/sk/ozubena-remenica-poly-chain-gt-8m-rozstup-8-0-mm-s-predvrtanym-otvorom-a-pre-taper-lock-1.html
AC to DC with Rectifier, put Step-Up with Capacitor, then Step-Down/Voltage Stabilizer to make DC Motor run... Logic "if the DC Voltage produce High DC Voltage (not AC), but not try yet... 🤭
Doesn't work..bcz . first thing is the voltage.. the alternator produce low voltage and high frequency.. the motor want 220 volt 50 hz. .. second thing is the law thermodynamic . The energy we take from output is low from the energy we need to produce it ..
So it can't be anything! You have to adjust the number of poles with the number of magnets and also to operate 230V 1-phase motor you need 50Hz, i.e. each pair of poles (N&S) generates the 230V sine wave at 180 degrees and 3000 rpm. If you have more poles, the speed of rotation must be adjusted with 2 pairs of poles = 1500 rpm with 4 pairs of poles 750 rpm etc. First of all you should learn the technology behind the motors/generators. Only then can you say whether it really works or is fake.
Haha, this has got to be THE most ridiculous 'free energy generator' I have seen to date. KA/M is a measure of energy density, not of magnetic strength. I don't even believe those lumps of metal are even rare earth magnets, he's milled out slots in a squirrel cage rotor and left some of the shorted turns intact! I can't quite see but it looks to me that he's milled five slots in the armature for the 'magnets', think about it. If they were real magnets there's no way on earth that those puny bits of studding could keep the rotor centralised within the stator. The magnetic gap is also huge. Gosh, this list could go on and on...🤣🤣🤣🤣🤣🤣🤣🤣
@@danielmakarewicz9033 musi działać, wejdź sobie na stronę Urzędu Patentowego, takie generatory są, autorzy dostali odmowy udzielenia prawa wyłącznego ponieważ patenty kilkadziesiąt lat wcześniej zostały zgłoszone i zastrzeżone, to dlatego nie dostaniemy go w żadnym sklepie. A mydli się nam oczy o zielonej energii, elektrykach itp. bajkach. Bardzo mocno ktoś chce by takie projekty nie były komercyjne. Dlatego musimy kombinować metodą prób i błędów samemu. Ale pewne jest że prądnica o odpowiednich parametrach (magnesy od odpowiedniej liczbie gausów) wytworzy tyle prądu że napędzi i silnik i nadwyżkę którą można wykorzystać!
@@pawelfox5933 mam rozebrany alternator mam magnesy zastanawiam sie nad tym zeby to dobrze zrobic i szukam frezarki zeby to dosc perfekcyjne zrobic zeby nie był0o bic.
@@engineer_peter ok, somehow understandable. But you see even in the comments, there are some masterminds around recommending endless BS (another magnet, a diode here, a resistor there, some winds more, some less winds, 5 other coils, remove coils,….. it never stops)…..
@@dankem4947 ist das jetzt eine Fangfrage? Was meinen Sie mit Erfahrung? Ich brauche keinen solchen “Generator” zu bauen um zu wissen dass es nicht funktioniert. Nehmen Sie ein Physikbuch (Gymnasium so um Schuljahr 8 rum) oder wenn Sie es mehr grafisch brauchen laden Sie sich einen Physiksimulator runter (gibts auch gute Freeware, hauptsächlich für Linux). Um es nochmals einfach zu erklären, ES GEHT EINFACH NICHT - alles was Sie darüberhinaus hören sind Träumereien/Spinnereien oder gehören in die Sparte “Esoterik”
“ENGINEER” really? Anyways, Try to not put the cart in front of the horse. That’s BACKWARDS. Goals-simple. Create voltage with your ironless stator(iron might help too :/), get voltage from the spin, then add some weight to pulley, fancy flywheel, or 50 rusty washers, just add momentum. You know dam well it’s being done all over the world. I can’t believe us USA folks are finishing last, in the race. Come on bro. Get up. Let’s do this!!!!! I been waiting for your ass quite a while. Get up Pete!!!! Time for work yo!!!!
If I'm not wrong, the coil on one side of the stator is tied with the coil on the opposite side. This means when you have a S magnet at one side and a N magnet at its opposite site, both will induce opposite magnetic fields, resulting in one cancelling the other, and consequently, the voltage at the stator will always be zero, no matter which phases you measure. You see, when you measure at the exits, the voltimeter don't even oscilate, which means charges are cancelling each other. Try to make it with the alternator rotor, which has 12 poles instead of 6.
U have 4 poles on ur rotor that means at any rotor position u have to almoust fully cover 1/4 surface of ur stator with the magnetic field (thats why the surface of ur coil winding on stator should match the surface of ur pole/magnet. If that stator is from 24v alternator should have 36 poles with 3 sets of windings for 3 phases and 12 poles/magnets on the rotor. Stick with the original setup or rewind ur stator matching the surface of pole and pole number on the rotor. Ur setup needs on the rotor at least 6 poles to generate some power and 12 to generate what is intendet to. I like ur work very much is clean but.....u may have some missing info in generating power and dont think u did that on purpose of discouraging other people to try. Keep it up!!!
If you are going to disprove someone's experiment my friend, you need to do it exactly as how they did it, as slight variations can have different results. Only then you can say that what they did does not work.
Everybody knows already that the liberty engine and similar contraptions don't work without a hidden power source.
The liberty engine guys explained in they're video that there was something they were not showing us.
Yeah they didn't have a power source plugged in. Easy fix
Don’t blame the test results for such setup. If you want to get 230V.A.C the copper awg of the alternator should be far smaller so to achieve a bigger number of turns on the stator windings hence the bigger EMF generated. Have you searched FTC generators.
⚠️ Gravity fed water driven electrict generators works. Gravity is the added force that makes free energy possible.
The drive motor has 2 poles.
And is the modified generator 2 poles?
If so, try with only two poles, north and south.
Voltage cannot be generated because it is offset by the magnetism next to it.
I made the same mistake and after fixing it generated power.
Please do not give up.
がんばって👍
Hi, you can give me your test
@@WhaleTrade But what do you and tg9b say, study the first and second of thermodynamics, study goats
When you are able to defy the laws of thermodynamics, please show us how you achieved this. 😂
2 things that are missing or incorrect is the number of magnets vs the poles in the stator. the size of the magnets have to corelate aswell. the last major thing is the flywheel. That's imperative, it stores the momentum of the inital spin long enough to get things started. Other than that great attempt.
This will only be maximum at 16-18 V if the circuit is delta, and maximum at 24-32V if the circuit is star. This has not changed the pulley for the drive motor. Good Job.
Oh man - that looks like a great piece of equipment. Just do not give up - you can make it work!
Well done, such a clean build en outcome, congratulations , you should post this in the so called free energy community
suggestion: measure input amperage to electric motor. Compare that to output amperage of generator. even if you cannot start it with a role using magnets will save 5-10 amps from the generator that can be used elsewhere
Hello friend, I congratulate you, it is an excellent video. But for it to work 100%, your generator has to have 6 North poles and 6 South poles of a total of 12 neodymium magnets, otherwise it will NOT work. From there everything is well done 👏 greetings from Honduras 🇭🇳 Blessings and much success
How big is a motor that you're using to turn it and the AC or DC
Try to modify by adding running capacitor. Capacitor can store current same as battery. Instead of fan belt try to lathe a shafting to connect two motor shaft. Fan belt is adding weight to its Rpm.
Thank you for the advice
Sad that isn't fake. I was really hoping this setup would work. Thanks for being honest.
wow great job…..sir put a ups with ur alternator…maybe self running??❤
you are using DC alternator with the AC motor you must using the DC motor with DC alternator or AC m and ACalternator; and the rotor and the stator they must have a smolest space between them
The electric generator that you have did its wrong because the diameter of the rotor or stator is not the same size (the distance between the 2 element are different:)thats why it doesn't generate electricity.
saludos de Cuba estube mirando varios videos incluso el mi viral y por un momento. estube desconcertado y casi termino creyendolo y gracias a ti aclaro mis dudas, soy electricista industrial pero no tengo recursos para esos experimentos y aca en cuba hace mucha falta tecnologia ignobadora para resolver la crisis energetica , creo el mejor video es el tuyo , mi analisis me recuerda algunos principios aprendidos y la verdad que este proyecto no es posible si no se hace girar el alternador a 1000 rpm para poder suministrar el voltage de arranque del motor y no es posible alcanzar esa velocidad con el impulso de la cuerda. ahora bien solo falta hacer la prueba impulsando con potencia mecanica y una ves logrado medir el voltaje generado porque es la otra duda que tengo que sea capaz de generar 220 v
saludos desde Eslovaquia! Gracias por sus comentarios, lo apreciamos
la free energy esiste solo che i potenti non vogliono che lo sappiamo.
I like your videos because you are honest
Muito bom 😃
the strator, i.e. the inner magnetic field, must rotate more on the outer ring. Say bigger diameter.
is wrong you have to switch your motor to rotoverter and put a flywheel calculating the consumption of the engine in the weight of the flywheel plus the loads you will add 👍🇧🇷🇧🇷
excelent work, 🎉 that is real!!!! I liked
thank you ;-)
Try increasing the stator winding. How would u expect high flow of current from low volume of copper. Try increasing the winding turns
This is the original stator removed from a 24V 120A truck alternator
u have to look at the geometry of ur stator and number of poles
Dude , you should Winding the car's alternator coil to 220 volts. Because with what you did not more than 24 volts of electricity will be produced, which cannot power the other alternator and will not work
You need to add magnets to your opened generator also a silver mixed aluminum alloy was used in the liberty engine projects device !
The law of physics is clear :" Energy made from nothing does not exist"
Very interesting video, I though it would work but I guess not.
...in the sense of deterring anyone from wanting to build this rig, pretty good. However, the motor on the mains turned in the exact opposite direction to when you pulled the rope, so you didn't discourage me from trying to build it. I'm sorry, but if you're being paid by the patent owner to make deliberate fakes, this didn't quite work out.
Надо попробывать совместить по оборотам и напряжению.Или поставить между ними латр.
Благодарю за совет
латр не поможет, там асинхронник, от частоты зависит
Gut 👍🤗
Try using modified car alternator. We modified the wired coil from output 24v to 230v.
Or using 5kcp39ggs336s blower motor 1/3hp 1075rpm 1ph 115v 5.20A but you need to change your motor to 110v one
U need a big flywheel to get centrifugal force for maintain the rotation....✌️👍
E visto varios vídeos tuyos y desde el primero vi que tienes en cuenta la técnica pero olvidas las matemáticas y sin la fórmula y variables correctas no hay ecuación y sin ecuación no hay nada,Saludos
gracias por el consejo
You are the best!!
Thank you :-)
If you still use the same setup stator winding coils doesn't match the rotor magnet poles it wont work...
R u got one ?
Oh NO!!!! 😱😱😱 A free energy machine that doesn't work???? Who'd have thought eh?
Was hast du für die Zukunft getan mein Freund???
What have you done for the future my friend???
A co ty zrobiłeś dla przyszłości przyjacielu???
Maybe with a capacitor? Or with a weight plate?
and if you connected large capacitors, like batteries, between the generator and the engine, it would only take a few seconds to switch to power from the generator, it is possible_???
Hi Peter, I like your set up. Please give the link to where I can purchase the corner brackets, rod and nuts. Thanks.
I already replied to you under another video
@@engineer_peter tell us on this one,, so we all know and don't have to look for "your other video", it keeps your subs happy
@@12volthighpeakvanlife.62 All the information you need is in the cloud, that is cloud cuckoo land!😅🤣😅🤣😂
@@icarossavvides2641 yes i know , why i ask lol
You are as sick as the other guy!
Once again you need a 3rd component. A middle man
Unde este avantajul dacă folosiți rețeaua electrică?
Wow wow
Gooooooood Man.
The air gap between the stator and the rotor is very high .
Did you wired it correctly or you just make an efford to believe that you want?
A saw many videos about this, where real parole with real knowledge has try this to prove that’s doesn’t work, thanks for You to prove that scam is a scam 🥰
Nice
Desse jeito aí lógico que não dá certo , é necessário adicionar um volante intermediário como no inverno dos árabes....o deles deu certo
Tak umnie działa samo chodzi i żeby działało sprawdzi czy ma powyrzej 50 Hz inaczej nie zadziała kup se miernik do mierzenia częstotliwości bo przy 40 paru hercach nie zadziała będzie się zatrzymywał i prądnica powinna podawać 230 v
Józef pokaż film z tym co zrobiłeś u siebie na kanale ?
If you're trying to make the liberty engine that the liberty engine project did then what's with plugging this unit into a wall outlet
U need to add magnet that against the rotor. That should be work. Try it
I will try when I find a suitable magnet. Thanks for your advice
Вы нарвались на чужое изобретение!!! Могут быть проблемы в международном суде!!!
Это не новое изобретение я такое видел ещё в советском союзе восемьдесят пятый год
I make many wind generators. 6 magnets it is nothing😀
Спасибо что развеял миф. Возьми полноценный классический бензиновый генератор, на 4-5 кВт, и вместо двигателя внутреннего сгорания поставь электродвигатель, тот который в видео на 1-1.5 кВт. Интересно получится ли вечный двигатель при такой компоновке, и вообще запустится ли система? Такой эксперимент точно развеет все мифы!
Спасибо, хорошая идея,подумаю над этим и точно попробую разобраться.
@@engineer_peter
По моему там вольтаж и чистота (Hz) и обороты должны один в один совпадать… кто-то писал вроде. Спасибо огромное за ваш труд высококлассный!!!
Great job debunking this!
Thank you!
Hola quisiera informarte qué un alternador cuenta con 12 polos por lo que debes ponerle al rotor, 12 imágenes. De lo contrario no te va a funcionar. Si tienes alguna duda, consulta. Preguntando se llega a Roma.
Usted tiene toda la razón 👏 amigo. Si el aumentará la cantidad de imanes permanente a 12 polos le va trabajar al 100% muy bien. Ya que el número de bobinas en total son 18 y por cada fase lleva 6 bobinas. En cada bobina tiene que llevar un polo N y 6 polos S.
Yo estoy haciendo también un generador así convirtiendo un Motor trifasico de 5hp a Generador con 🧲 imanes permanente Neodymium 50x25x10 cm. Y también el embobinado tuve que modificarlo. Saludos desde Honduras 🇭🇳 colegas bendiciones.
surprised by number of guys build these to show it dont work.
firma laferto z italie vyrabi magnet motor - stačii si jen koupit.
takže vse je uz vymyslene.
no ak tomu si dej 1.5 kw motor a bude to free.
Several reasons why your model will not work:
1. You did not force glue together two opposing magnets in alternating sequences. Two magnets with both north poles glued together and alternated in every other slot with two magnets glued with south poles together. This creates a zero point of magnetism. Force the magnets together in a vice to force glue them together.
2. More importantly, you did not epoxy the magnets in place. Resin has living energy properties that when pulsed will balance electro magnetism with orgone energy from out of the æther. Purity of resin and differing types of resin is also a factor.
This was discovered twenty years ago when lots of people had experimented with homemade "orgonite" of which the original inventor, Karl Hans Welz, brought copyright lawsuits against "SimpleEnigma" and the Cloudbuster and Orgonite forums. Back in 1994, I met Karl Hans Welz and he showed me his newly invented orgonite. Twenty years ago, I reinvented Wilhelm Reich's cloudbuster using knowledge that I had from Karl Hanz Welz along with Trevor James Constable's research and book "Cosmic Pulse of Life" and the experiments of Don and Carol Croft. Since then, "chemtrails" have been mostly debunked however sky pollution still persists and the hundreds of Croft cloudbusters created did very little to actually clean up the skies.
Since I did not copy the Croft designs but rather designed my own cloudbuster, I created the worlds most powerful cloudbuster which I demonstrated to a few skeptics as I engineered steering a hurricane in september of 2017 back around in a full circle and along the coast toward New York as a mild hurricane exactly as I said I was going to do two days prior (ætheric forces within the orgone envelope of the atmospheric water vapor takes a few hours to a couple of days for the orgone energy to build up). My cloudbuster design far exceeds what has been previously invented by anyone else and has a functional range between 650 miles and 3,000 miles. Besides steering two hurricanes, I have used this prototype to save someones life by transmitting orgone energy and homeopathic energy 30 miles away as she had full organ failure on life support in the ICU. Three days it took to reactivate her lungs and another seven days to reactivate her kidneys. Both times an unexpected el níno heated up the atlantic ocean back in 2014.
Also, Wilhelm Reich had originally invented this orgone motor back in the 1950's which never was published due to him dying in prison. It is important to not only understand electro magnetism, but also ætheric physics which provides the living energies flowing on earth. Orgone energy pulsates along surfaces and is generated from organic based materials and is activated when spun and pulsed with electromagnetism. The orgone motor is a closed loop that balances electromagnetism with orgone energy. It is not perpetual motion, nor is it free energy. Orgone energy accumulates from the seven æthers and does in fact have a capacity threshold whereby living energy becomes dead energy which Reich called DOR. Also know that orgone motors do not function everwhere all the time. Orgone motors functions best when there is a nearby flowing creek or river, pond or a lake that has lots of living things in it. Whenever an orgone motor fails to work, the motor can be activated from welding a brass water faucet and screwing on an empty organic rubber hose with the other end placed in a bucket of rain water or creek water (non flowing ponds and lakes could be used but best to place the hose in the pond or lake instead of a bucket). Also, a ground wire might be needed to balance the electromagnetism. Also know that various types of metals are either projective or receptive of orgone energy which differs from the list of non magnetic metals. Copper and silver are receptive metals whereas brass, aluminum, steel and gold are projective metals of pulsating accumulative orgone energy.
On the old orgonite forums, someone discovered that when putting a vacuum cleaner motor/rotor that has orgonite (machine metal shavings and epoxy resin) and an undisclosed crystal onto the external shaft that when plugged in and turned on had caused several transformers in his block to blow a fuse. I have never conducted that experiment, but I did experience blowing my transfomers fuse twice from my orgonite of my dismantled ultra cloudbuster. Other discoveries included orgonite density and scalar orgonite. My discovery of which I never disclosed publicly, was in phase conjugating orgone energy itself into a zero point longitudinal beam without using magnets. Opposing magnets force glued together within epoxy however is another type of phase conjugating the magnetic and orgone states. Pulsing and spinning is what activates orgone energy and was first discovered by Karl Hans Welz which I witnessed back in 1994.
Top of magnets need to be oval.
Need to tighten the air gap on the po crap.
Are you sure you did all the steps correctly? I'm just asking not saying you did anything wrong.
A może to celowa dezinformacja. By ludzie tego nie robili.. By byli zależni..
Embè?? ?????????????? bravo ha scoperto l'acqua calda, se innesto la spina funziona altrimenti no!! Bravo!!
You need build parendev permanent motor and connecting overunity to your generator.
you didn't WANT to show us the entire ''free energy secret'' ....
What is the number of the item (adapter ring) that the strap is attached to?
I'm from Slovakia, I'll give you a link to the website where I bought it. maybe you can find something similar in your country. eshop.haberkorn.cz/sk/ozubena-remenica-poly-chain-gt-8m-rozstup-8-0-mm-s-predvrtanym-otvorom-a-pre-taper-lock-1.html
@@engineer_peter hallo Peter ich komme aus Österreich könntest du es mir gegen Bezahlung verkaufen oder es mir zeigen bitte
AC to DC with Rectifier, put Step-Up with Capacitor, then Step-Down/Voltage Stabilizer to make DC Motor run... Logic "if the DC Voltage produce High DC Voltage (not AC), but not try yet... 🤭
Remember there are fools everywhere that's why the world is not growing.i know what I saw in that video and Im building it and it's going to work
s.v.p. pour acheter cette machine est-ce qu'elle est disponible ?..merci
C'est une machine faite maison.
Thanks for proving its doesn't work Peter.
Doesn't work..bcz . first thing is the voltage.. the alternator produce low voltage and high frequency.. the motor want 220 volt 50 hz. .. second thing is the law thermodynamic . The energy we take from output is low from the energy we need to produce it ..
Un alternador usa 12 campos 6n+6s
tiene que usar un moto de al eficiencia y una laternador de camion de 24 volt
gracias por el consejo
Na 12 magnesach będzie ci samochodziło
Próbowałeś , daj zać czy działa.
Din ce se vede in filmuleț .....cînd îl conectați la rețea motorul se învârte invers față de cum ati dorit să-l porniți cu sfoara 🤔
I am afraid that in many ways this set up is absolutely wrong.
You can prove that unity machine does not work but not the way you are trying to do.
⚠️ Gravity fed water electric generators work just fine for free energy after the initial start up cost. Google it.
bad workmanship, it cannot work, watch the movie carefuly and you will see what the magnet system should be.
So it can't be anything! You have to adjust the number of poles with the number of magnets and also to operate 230V 1-phase motor you need 50Hz, i.e. each pair of poles (N&S) generates the 230V sine wave at 180 degrees and 3000 rpm. If you have more poles, the speed of rotation must be adjusted with 2 pairs of poles = 1500 rpm with 4 pairs of poles 750 rpm etc. First of all you should learn the technology behind the motors/generators. Only then can you say whether it really works or is fake.
Ppl nowadays dont know anything about physics 😢
価格宜しく配信御願いします
Haha, this has got to be THE most ridiculous 'free energy generator' I have seen to date. KA/M is a measure of energy density, not of magnetic strength. I don't even believe those lumps of metal are even rare earth magnets, he's milled out slots in a squirrel cage rotor and left some of the shorted turns intact! I can't quite see but it looks to me that he's milled five slots in the armature for the 'magnets', think about it. If they were real magnets there's no way on earth that those puny bits of studding could keep the rotor centralised within the stator. The magnetic gap is also huge. Gosh, this list could go on and on...🤣🤣🤣🤣🤣🤣🤣🤣
Coś jest źle, a generator musi zadziałać ponieważ jest już opatentowany!
Ja bede to robił na dniach zobaczymy hehehe
@@danielmakarewicz9033 musi działać, wejdź sobie na stronę Urzędu Patentowego, takie generatory są, autorzy dostali odmowy udzielenia prawa wyłącznego ponieważ patenty kilkadziesiąt lat wcześniej zostały zgłoszone i zastrzeżone, to dlatego nie dostaniemy go w żadnym sklepie.
A mydli się nam oczy o zielonej energii, elektrykach itp. bajkach.
Bardzo mocno ktoś chce by takie projekty nie były komercyjne. Dlatego musimy kombinować metodą prób i błędów samemu. Ale pewne jest że prądnica o odpowiednich parametrach (magnesy od odpowiedniej liczbie gausów) wytworzy tyle prądu że napędzi i silnik i nadwyżkę którą można wykorzystać!
@@danielmakarewicz9033 napisz czy zadziałało.
@@pawelfox5933 mam rozebrany alternator mam magnesy zastanawiam sie nad tym zeby to dobrze zrobic i szukam frezarki zeby to dosc perfekcyjne zrobic zeby nie był0o bic.
자석의 잘못된 위치
자석의 잘못된 길이
Ja da kommt was
Try to make subtitle for your step to now what do you do and your result
Well it was worth a try wasn't it.
I still don’t get it why you spend so much time, efforts and obviously money in something which is clear that it won’t work?!
I know, but people don't and I enjoy putting things together on the weekend when I'm bored :-))
@@engineer_peter just a joke,, woww
@@engineer_peter ok, somehow understandable. But you see even in the comments, there are some masterminds around recommending endless BS (another magnet, a diode here, a resistor there, some winds more, some less winds, 5 other coils, remove coils,….. it never stops)…..
@@holgerkirschbaum6911
Hallo 🙋♂️! Hatten sie schon Erfahrung mit solchen Motoren bzw. Generatoren?
Mfg
@@dankem4947 ist das jetzt eine Fangfrage? Was meinen Sie mit Erfahrung? Ich brauche keinen solchen “Generator” zu bauen um zu wissen dass es nicht funktioniert. Nehmen Sie ein Physikbuch (Gymnasium so um Schuljahr 8 rum) oder wenn Sie es mehr grafisch brauchen laden Sie sich einen Physiksimulator runter (gibts auch gute Freeware, hauptsächlich für Linux).
Um es nochmals einfach zu erklären, ES GEHT EINFACH NICHT - alles was Sie darüberhinaus hören sind Träumereien/Spinnereien oder gehören in die Sparte “Esoterik”
i can make a video if you want ...infact i challenge you if you follow my setup you will be amazed
Zauważyłem że większość ludzi sprawdza volty a nie herce dlatego im to nie działa
sei bravissimo nella preparazione e maldestro nella verifica: chi ti paga?
nessuno mi paga, apro gli occhi alla gente
@@engineer_peter la free energy esiste i vari geni che ci stavano riuscendo sono morti per questo e lo sai bene amico.
No such thing as free energy or over unity machines. Anyone that passes a high physics class knows this.
There is a malfonction in your set or you are paid to say there is no over unity
กระแสไฟฟ้าได้มาไม่พอจ่ายให้มอเต้อคำนวนใหม่ครับ
Your not undestend work magnetic generators.
価格表示お願いいたします🍀
Meter needed to be on AC not DC
“ENGINEER” really? Anyways, Try to not put the cart in front of the horse. That’s BACKWARDS. Goals-simple. Create voltage with your ironless stator(iron might help too :/), get voltage from the spin, then add some weight to pulley, fancy flywheel, or 50 rusty washers, just add momentum. You know dam well it’s being done all over the world. I can’t believe us USA folks are finishing last, in the race. Come on bro. Get up. Let’s do this!!!!! I been waiting for your ass quite a while. Get up Pete!!!! Time for work yo!!!!