Keep telling people about your channel and that show what your doing as you build. Learning and burning 🔥 at it's best. Great job and congratulations on you bad ass huge shop.
Always great to see your process. The plasma cutter certainly seems to help out, which is awesome because it means an easier job for you. Thanks for sharing!
That was very cool cheers for showing the plates inside was wondering how you did that definitely a quality build if I was in the states I'd be tracking you down
Great job! Just moved from Vegas to Austin Texas. I'm getting closer Allen hopefully I can drive to pick up my Smoker one day. Your making it hard to figure out which one I want. 🤣 Keep up the good work!
Allen your videos are AWESOME . I am not a critic but the only thing I can see wrong with your videos is THERE AINT ENOUGH OF THEM !!! there I can be a professional critic. For C.B.S. THANK you Frank from montana. PS. How's the new shop comming ?
Buenas excelente trabajo Tengo una pregunta Cuando se pinta con alta temperatura se puede pintar también el interior del tanque o solamente lo externo le agradezco me conteste ya que estoy próximo a pintar mi smoker Gracias, gracias buen dia
As far as the new diverter goes will the water pan be as wide as the open is now? One of the best benefits of your upright is the ability pull that diverter plate out and do what I call smoke grill things like ribs, chicken etc. low n slow but right over the coals.
Consider putting a plate stating "Fabricated in USA"....This idea came after I saw an Indiana blacksmith put 'Forged in USA" to each horse shoes that he made
Allen, what kind of camera do you use? It did well during the table shaking incident! And I’ve been meaning to ask what kind of paint do you use? Is it just a regular Automotive?
How many hours does it take you to build one smoker? Cost of Metal, your time. Honestly, I think you need to raise your prices. If you where local to me, I would have already bought one.
@@Allensweldingwoodworking ok glad to know hope you and family made it ok ??we got a tornado out the deal here in ms .where we ate but little clean up all good brother
You do great work, but I think your chimney is to high. It needs to be at bottom grate level. Look around and you will see a lot of people making this mistake.
The only man who hasn’t stop working during this whole pandemic! Love watching your work!
Keep telling people about your channel and that show what your doing as you build.
Learning and burning 🔥 at it's best.
Great job and congratulations on you bad ass huge shop.
Always great to see your process. The plasma cutter certainly seems to help out, which is awesome because it means an easier job for you. Thanks for sharing!
They’re stunning I wish I could make them grills I wouldn’t change a thing 💯👏🏾👍🏾
That was very cool cheers for showing the plates inside was wondering how you did that definitely a quality build if I was in the states I'd be tracking you down
Allen is the genuine article. Talented and honest and hard welding!
Show off that shop. I'm so happy for your
Nice craftsmanship on your smokers!
Great job! Just moved from Vegas to Austin Texas. I'm getting closer Allen hopefully I can drive to pick up my Smoker one day. Your making it hard to figure out which one I want. 🤣 Keep up the good work!
Fantastic build! Thanks for the Videos!
Allen your videos are AWESOME . I am not a critic but the only thing I can see wrong with your videos is THERE AINT ENOUGH OF THEM !!! there I can be a professional critic. For C.B.S. THANK you Frank from montana. PS. How's the new shop comming ?
You make beautiful pits. You make me wanna go outside and weld.
Buenas excelente trabajo
Tengo una pregunta
Cuando se pinta con alta temperatura se puede pintar también el interior del tanque o solamente lo externo le agradezco me conteste ya que estoy próximo a pintar mi smoker
Gracias, gracias buen dia
apenas fora!!!!! solamente lo externo!!!!!!!!!
Good craftsmanship! I bet you could build a nice wood stove for a cabin.
Allen, looking young and slim these days! Nice work.
good work and production man. you nail each one MAX. stay safe in LA from this hurricane heading your way.
your channel is awesome... I been watching for awhile, I can watch this all day
As far as the new diverter goes will the water pan be as wide as the open is now? One of the best benefits of your upright is the ability pull that diverter plate out and do what I call smoke grill things like ribs, chicken etc. low n slow but right over the coals.
Genio, saludos desde Argentina!!! Me inspiró mucho en tus modelos de diseños!!
Please like & thumbs up the video to all that watch 👍👍👍👍👍👍👍👍👍
All the best fae Scotland, love these BBQ/Smoker builds, keep them coming
Que genial gracias por tus fantásticos vídeos son creaciones fenomenales.desde Colombia👍
Love your videos buddy and one day will be getting a smoker from you .
Hope you and the family are safe during the hurricane!
Your a true craftsman.
Love the shirt Allen 👍
Very nice work!!
Great work Allen!!
Consider putting a plate stating "Fabricated in USA"....This idea came after I saw an Indiana blacksmith put 'Forged in USA" to each horse shoes that he made
Allen, what kind of camera do you use? It did well during the table shaking incident!
And I’ve been meaning to ask what kind of paint do you use? Is it just a regular Automotive?
great video can u tell me what model plasma cutter set up u have
i bought a lotos 5000d red pilot arc
lots of consumables
I use the HTP micro cut plasma, excellent machine!
I don't mean this specific smoker, but one like it.
Love your channel all the way from Australia. I’m building my own offset. Wondering What paint do you paint your smokers with ?
Bbq “high heat” paint
I hear that welders cough. You need to wear a helmet mask with a charcoal pre filter. Miller got em!
Good stuff as always
How’s your prices now that a sheet of 3/16 goes for $500 lol
Lo e the exhaust system on the reverse flow.
Hey Alan...how do you determine the throat size a smoker....any tips
I’m just wondering what kind of paint that is? I need to spray mine.
more than likely its high heat engine paint
This might be my buddies!!
Which plasma is that you're using
Where do you get the steel plate to make something like this ?
You paint right over the mill scale? I thought that's a no no?
I really admire your skill. If I could afford the shipping I would order one. Thanks
How is the new shop coming
How is the shop coming?
Allen, Wintson or Hill for the Saints this year?
What is the lead time on the reverse smoker you're working on in this video, and what state do you live in?
He lives in North LA along the TX border.
parabéns!!!!!!!!!!
I would like a smoker made but not sure where you are located
What kind of plasma torch do you have? Thanks just subbed
HTP micro cut
What kind of paint do you use
How do I contact you in regards to getting a smoker built
Contact info is in the description Box
Can you make a insulated firebox ?
Yes
Can you make a firebox out of 1/2”?
Yes but I don’t keep 1/2” on hand because of the weight
@@Allensweldingwoodworking do you think it’s worth it for maintaining temp?
What's the paint you're using Allen?
🔥🔥🔥
How many hours does it take you to build one smoker?
Cost of Metal, your time.
Honestly, I think you need to raise your prices.
If you where local to me, I would have already bought one.
Allen where are you located…?
If I keep watching you ill be some body 1 day.
How can I get in touch with you to order a smoker? Tried emailing twice.
Email is allentubbs31@gmail.com
@@Allensweldingwoodworking that’s the email address I used on 8/13. Just resent.
Please. Let us know how you did through the hurricane ..even if it's only a 3 min video let us know you and your fam is ok
It’s further down than us, we’re just getting a little rain so far
@@Allensweldingwoodworking ok glad to know hope you and family made it ok ??we got a tornado out the deal here in ms .where we ate but little clean up all good brother
You do great work, but I think your chimney is to high. It needs to be at bottom grate level. Look around and you will see a lot of people making this mistake.
Haha.. it’s right above the bottom grate, it’s been tested and trust me, it’s right
I hope this great artist gets his fair share of profits selling them because they seem inexpensive for the quality.
Very nice work!