Analysis of Beam having point load & UDL using ANSYS 2020 R1 APDL
HTML-код
- Опубликовано: 29 янв 2025
- In this video cantilever beam having point load and UDL is Analysed using ANSYS 2020 R1 Mechanical APDL.
Shear force and bending moment diagram has been explained in detail.
#ANSYS_2020 #Beam #UDL
#SFD_BMD
Very good explanation sir it is easy to understand.
Thanks 😊🙏
Very well explained. Thank you
Thank you Sir for such nice explanation
Very good. Only need to rotate 90º the cross section to have the correct results.👍!
what if the cross section information is nor given and the moment of inertia is given instead??
I=1/12bh^3 b-width, h-height
@@nivruttipatil8013 still I can not get the height and width if one of them is not given. so does it mean i must need the cross section information rather than the Moment of inertia?
@@freemanfreed1581 there must be some relationship in b&h i.e. b=h or b=2h etc. to get b&h
@@freemanfreed1581 or you need cross section area
@@nivruttipatil8013 thank you that was my original point ? if I did not bother you, what is the difference between mesh icon and mesh tool icon for meshing?
Hello Sir,
Could you please guide me about table 188.2 (which you have showed in this video) of beam 188 . I am unable to find it on ANSYS website as you mentioned in video with the HELP option
Search for BEAM188 element discription then scroll down to Table 188.2: BEAM188 item and sequence number
Sir sometimes I will get error messages like..
Both solid models and finite element model boundary conditions have been applied to this model...... So on
And I won't get SFD and BMD in correct shape..
Can u help me to solve this
There May be chances of wrong boundry conditions applied.
Apply accordig to supports
@@nivruttipatil8013 I will try again sir
@@mechmaster125 ok