GreenStar 2630 vs 4640 Basic Guidance Setup
HTML-код
- Опубликовано: 10 июл 2024
- This video walks through important GreenStar display settings for GREEN FIT guidance using GreenStar 2630 display compared to a 4640.
0:07 - Introduction and Accessing ISOBUS VT Menus
2:50 - GreenStar Equipment and Offsets
8:16 - AutoTrac Advanced Settings
11:17 - StarFire Receiver Settings
14:17 - AutoTrac Status Pie and Setting Guidance Line 
Наука
What can one do if the shading behind is not closing between two trucks or AB line
Hi Michael. Are you missing coverage entirely, or are you just leaving behind "strips" between passes? The former requires implement geometry to be fully entered along with a functioning "recording source". The latter may require some adjustment to the implement width value assuming the space between guidance passes is not too large.
I’m not getting signal on mines . I have the 2630 display running itc bubble . Can you help me
Trying to do mapping . But I don’t have auto steer
@@dionwadefarmsllc Hi Wade.
About a year ago, the ITC's ability to support SF1 corrections had ended, making it unusable for AutoTrac.
There may be other options available. I would suggest reaching out to your John Deere dealer for more information.
@@reichhardttraining yeah I heard tha same thing another farmer was telling me something . 😂 I wish I knew before I spent all dat money . But all I need is the mapping . Not to much worried about auto steer . It’s just mapping is what I need
@@dionwadefarmsllc Mapping shouldn't be a problem with the ITC as it can still get WAAS corrections. Just be sure that it is updated so it can properly acquire correction.
@@reichhardttraining thanks 🙏 you’ll see it on my channel when I was putting it up
Germany?
Hi Iness. The product is developed in Germany, and is distributed throughout Europe, North America and Australia as well as other regions. This RUclips channel is based out of the Reichhardt North American office for the purpose of supporting Reichhardt dealers and customers in our region.