Think it would be cool to do a temu bike build a yz or kx 125 and use as many temu parts to build the bike as possible I'd like to see that as always great vids always a pleasure to watch
You should test all the products, including the seat cover and pegs. And definitely get a temu graphic kit FROM temu if possible. Actually this got me thinking, you should do a temu bike build using as much parts off temu as you can.
I bought a 2016 rmz450 and it had some billet aluminum foot pegs on it. Absolute garbage. Thankfully it came with the stocks so I put them on there. I think it has the pivot levers on it too. So far they’re holding up okay but I will be looking into getting some better ones soon
I've run NiceCNC pegs on my wr250r and ktm 500. I like them for the street and stunt lot, not as much off road. They're really strong, but the springs they come with never fit properly.
Hey man! I’m hoping you will see this and can help me out. You made a video 7 years ago about your boys 06 yz85 and the crank gave out and got into the piston and basically destroyed it all. I’m in the same boat now! Expect my top end didn’t even have an hour on it and got destroyed! Would love to talk to ya about how your cases ended up looking!
13:54 lmfao the caption you put where you mentioned a fish smell i knew exactly what smell your talking about i work at a factory building school busses and the heater hoses smell so bad like rotten fish
People like the videos cuz they want to see these products but dont want to actually buy them. 😂😂 thanks for your service sir. And i put a cheap 12in light bar on my dualsport and its not as bright as i thought it was going to be. Not bad. But lacking a little
Back when I was broke and wanted a bike I bought an old cheap kdx and I wanted better pegs so I bought the same ones. Yeah they broke almost immediately
You should do like a ride America or ride the world tour. Where someone from each state/country has to ride and then do something or something..idk. But something that involves getting people involved. Maybe a ride charity. like those races where people will give a dollar for every mile you run etc. idk just an idea
I think I had the same one. It hit the pavement at 40 mph. Didn't snap, but it bent into the side of the engine so I couldn't get out of 3rd gear. It was a hard crash, so I'm actually glad it bent instead of snapping off my shift shaft.
@@NoBrake_Noah ave snapped a shift shaft before , I don’t know how I did it , on a YZ 250 , but I only just bought it from a shop and they fixed it for me , gear selector was touching frame, god know how I did it or it was not rebuilt properly
Nahhhhh bro just seems like he hates on everything he buys, for some people that really cant afford the true things its not a bad website, nor is the quality hahaha he just seems negative on every single purchase but I wont say your not entertaining 💪🏿💪🏿
I think smelling that seat like that is how you get Covid 😂
TEMU SPONSERED CR500 BUILD LETSSS GOOOOOO!!!!!!!!!!!!!!!!!!
Iv come to the conclusion that all Americans like the sound of their own voices they never shut up 😂
yessir Canada all the way
O Lort, you went there again! Well at least the space heater is not from there😂😂
😭😭😭
Loved that seat part.
Think it would be cool to do a temu bike build a yz or kx 125 and use as many temu parts to build the bike as possible I'd like to see that as always great vids always a pleasure to watch
No point in deleting another kx 125 out the bike world there getting hard to find now everyone buying one that needs work ends up braking it for parts
You should test all the products, including the seat cover and pegs.
And definitely get a temu graphic kit FROM temu if possible.
Actually this got me thinking, you should do a temu bike build using as much parts off temu as you can.
cast aluminum pegs break really easy, ask me how i know 🤣
😮
jup true but ther also are cnc machined pegs that dont break as easily but they are a lot thicker
My wfie is a TEMU junkie. I guess the next step is test how well these parts hold up.
I'd be careful with that 😂
This guy really knows how to ramble on, 10 minutes video tops made into 25 of rambling
Seat cover probably took 8 years off your life. Oh man, that’s bad…. Had me rolling though 😂😂😂
I bought a fly wheel puller for $15 it was like $70 on ebay temus been pretty good to me and my shed honestly
I bought a 2016 rmz450 and it had some billet aluminum foot pegs on it. Absolute garbage. Thankfully it came with the stocks so I put them on there. I think it has the pivot levers on it too. So far they’re holding up okay but I will be looking into getting some better ones soon
I've run NiceCNC pegs on my wr250r and ktm 500. I like them for the street and stunt lot, not as much off road. They're really strong, but the springs they come with never fit properly.
Speaking of big bore kits, have you ever thought about making a video on a big bore kit from Temu?
Never bought anything from temu, but as soon as I saw the Maiden hoodie I went looking…it’s not on there anymore. Dammit!!
Hey man! I’m hoping you will see this and can help me out. You made a video 7 years ago about your boys 06 yz85 and the crank gave out and got into the piston and basically destroyed it all. I’m in the same boat now! Expect my top end didn’t even have an hour on it and got destroyed! Would love to talk to ya about how your cases ended up looking!
Do a durability test with those foot pegs using a sledgehammer 🍻
Dig the Temu parts review!!! Great content!!
Csst aluminum foot pegs... i can think of cooler ways to break my legs.
13:54 lmfao the caption you put where you mentioned a fish smell i knew exactly what smell your talking about i work at a factory building school busses and the heater hoses smell so bad like rotten fish
People like the videos cuz they want to see these products but dont want to actually buy them. 😂😂 thanks for your service sir.
And i put a cheap 12in light bar on my dualsport and its not as bright as i thought it was going to be. Not bad. But lacking a little
I keep buying the Temu goggles my buddies call em the Temu terror’s lolol
bike build with 100% TEMU products---- then race it!!!!!!!!!
Goofy as hell but I just couldn’t stop watching.over all good little video
That seat smell was a sweatshop worker testing it out real quick. He had SWASS
Dont worry about you’r Spanish, I’m Mexican and i failed Spanish class.😂😂
Earned my sub with the “Biden Moment” lmao!
I tell you what I bought the pro kaken aluminum bars on Amazon and had them on my Yz for 4 years before selling it and honestly loved them.
next vid you should do the temu fasthouse overalls 😂
I was thinking the exact same thing. Please buy them and review them!
This guy might be simple, you unbolt one side to the top of the bars run it through the pad and rebolt….. 😂
The flag is a Ronnie Mac ( Screaming eagle #69) thing I do believe. He has that saying stickered on his stuff, or used to at least.
Back when I was broke and wanted a bike I bought an old cheap kdx and I wanted better pegs so I bought the same ones. Yeah they broke almost immediately
I just got a mikuni vm22. 26mm carb and throttle cable for $40 from temu
It's not a mikuni. Trust and believe.
Cut the pads with your Chinese Kershaw
You should do like a ride America or ride the world tour. Where someone from each state/country has to ride and then do something or something..idk. But something that involves getting people involved. Maybe a ride charity. like those races where people will give a dollar for every mile you run etc. idk just an idea
you should see if they have a slip on exhaust and try it haha
Those shift levers are meant for crf50/70 and pitbikes.
Those footings are also meant for Chinese crf50 replicas.
That gear shifter is ok , I bet I could sell them for triple the price, if they don’t snap
I think I had the same one. It hit the pavement at 40 mph. Didn't snap, but it bent into the side of the engine so I couldn't get out of 3rd gear. It was a hard crash, so I'm actually glad it bent instead of snapping off my shift shaft.
@@NoBrake_Noah ave snapped a shift shaft before , I don’t know how I did it , on a YZ 250 , but I only just bought it from a shop and they fixed it for me , gear selector was touching frame, god know how I did it or it was not rebuilt properly
Buy a carb 😂🤘 tbh I got a cheep mikuni carb copy put genuine jets in and 4 years later it's still going, but mine was ebay.
Helmet intercom lol but let me know if you get that.
Alibaba has the fake ktm 250 two stroke $800
I hope temu has a return policy carb exhaust and bars are more money so I hope you can recoup your losses😅
Order the Bluetooth communicators
Nor would Iron Maiden
8 dollars for seat covers or 100 for a guts worth a shot
Alright i will subscribe 😂
Why ?
I hate autocorrect. I typed footpegs.😅
Anyone got tips for making money as a teen?im trynna save up for a yamaha yz125
Apparently temu sell Lundmx t shirts now 😆
Get a temu bike for all that temu stuff..
So..... Any updates on the KX 500 Supermoto bike build?? Or are you still just pretending that "thing" never happened??
How do these companies make any money from these products
Reed pack ?
BOB WUZ HERE!!!
Do a Temu bike 😎👍
Footpegs are sketch. Went riding with friend. He came back with none. He rode the rest of the day with no footpegs
No please god don’t get a helmet from them
Test the stuff
Build a temu dirt bike 😂
Test motorbike exhaust
order a dirtbike exhaust
Im first one here.
cr500 af
This is getting weird I’m out
What is weird ?
Yea what’s weird¿
Nahhhhh bro just seems like he hates on everything he buys, for some people that really cant afford the true things its not a bad website, nor is the quality hahaha he just seems negative on every single purchase but I wont say your not entertaining 💪🏿💪🏿
Tchoin a Clique 5 minutes pour déballer trois babiole bas de game je suis vexer d avoir cliquer sur cette bouzze
Wtf