Hola saludos. Le cuento que yo lo hice como usted lo describe, pero no duro mucho el co2, como 8 días, así que hice cambios en la mezcla utilice la misma cantidad de azúcar y agua, pero en vez de levadura utilice cascaras de piña, cortadas en tiras de una piña pequeña para introducirla en la botella, luego la agite vigorosamente para que el azucar se disolviera y lo conecte, dejándolo quieto. Al otro día ya estaba funcionando y cada día que pasa come mas presión, ya lo tengo mas de un mes funcionando y así seguirá. Lo bueno de esta mezcla es muy estable. :)
Hola Orlando. Aprovecho tu experiencia para preguntarte, solo sale CO2 de la manguera? o trae consigo vapor de agua? lo necesito para una reacción química, no para esta aplicación
instead of putting glue on the cap, you can just rill a 5.5mm hole and cut the tube at an angle and pull it through with plyers. air tight all the time, and not permanent
thx for the vid. excellent info and i loved how you produced it. yeah i noticed your bubbles were huge with just a small piece of cloth. they go straight to surface and pop. google the plant guild power reactor... it's totally simple to make for yourself and it's the best working reactor i have ever seen. it sends co2 bubbles the size of pin needles throughout the tank
for the diffuser i just attached a small piece of cloth to the end of the small filter, it does a good job distributing the bubbles through out my whole aquarium. Still ive been looking for a better diy diffuser i could easily make.
heres what happened to me: i made one too but without the filter at the end. i just used an air stone stuck to the end of the tube and i didnt even see much bubbles coming out in that time.....and in 40 minutes one of my guppies started gasping for water at the surface so i got scared and stopped everythingbut 2 days after i lost 2 cherry shrimps who were just for 3 days in my tank :( Now i am afraid to do this again...and i was thinking i should just buy the proper thing what do you think?
hI! i wanted to ask you some things maybe you can help me with advise: 1. what types of fish you have in the tank and of you have shrimps? 2. were they oke with your c02 system? 3. are the plants liking it?
Normal baking yeast is okay to use but brewers yeast will last a bit longer. This is the stuff I use and it works well. img.tesco.com/Groceries/pi/393/5015821122393/IDShot_540x540.jpg
anthony pope buy a 2 way airline valve. connect it to the co2 out put and open one of the valves at night to let the Gass escape into your room instead
Because when you have 2 bottles you have more control over the reaction and can even turn it off. When you have 1 the reaction is continuous and you end up wasting half the product at night.
check valve is needed if the bottle array is at a level lower than you aquarium, once co2 generation stops, the water in the aquarium flows back out due to the siphoning effect. To prevent this a backflow valve/check valve is installed.
i did this before and my fish died because i didn't do my reshesh and left it on overnight and didn't install a regulator so be careful and do your research
Hola saludos. Le cuento que yo lo hice como usted lo describe, pero no duro mucho el co2, como 8 días, así que hice cambios en la mezcla utilice la misma cantidad de azúcar y agua, pero en vez de levadura utilice cascaras de piña, cortadas en tiras de una piña pequeña para introducirla en la botella, luego la agite vigorosamente para que el azucar se disolviera y lo conecte, dejándolo quieto. Al otro día ya estaba funcionando y cada día que pasa come mas presión, ya lo tengo mas de un mes funcionando y así seguirá. Lo bueno de esta mezcla es muy estable. :)
Hola Orlando. Aprovecho tu experiencia para preguntarte, solo sale CO2 de la manguera? o trae consigo vapor de agua? lo necesito para una reacción química, no para esta aplicación
the easy tutorial for co2 in youtube i have seen thanks
Glad you liked it!
instead of putting glue on the cap, you can just rill a 5.5mm hole and cut the tube at an angle and pull it through with plyers. air tight all the time, and not permanent
thx for the vid. excellent info and i loved how you produced it.
yeah i noticed your bubbles were huge with just a small piece of cloth. they go straight to surface and pop. google the plant guild power reactor... it's totally simple to make for yourself and it's the best working reactor i have ever seen. it sends co2 bubbles the size of pin needles throughout the tank
how long does the yeast/sugar reaction last? thanks
I'll try that in my greenhouse 👍
This was a very helpful tutorial. T.Y. .... and love the music! :)
for the diffuser i just attached a small piece of cloth to the end of the small filter, it does a good job distributing the bubbles through out my whole aquarium. Still ive been looking for a better diy diffuser i could easily make.
It works a ton better if you feed the co2 into the pump impeller... much better diffusion.
Hi. How much co2 needed for 5 gallon aquarium?
any update on the shrimp tank amigo? i would like to see how this alyout evolved
heres what happened to me: i made one too but without the filter at the end.
i just used an air stone stuck to the end of the tube and i didnt even see much bubbles coming out in that time.....and in 40 minutes one of my guppies started gasping for water at the surface so i got scared and stopped everythingbut 2 days after i lost 2 cherry shrimps who were just for 3 days in my tank :( Now i am afraid to do this again...and i was thinking i should just buy the proper thing what do you think?
how much do you think the whold "co2 bottle " last? SO you buy a air pump, buy another 3 way tube and then turn on and off co2 , is it true?
How many days it last for
hI! i wanted to ask you some things maybe you can help me with advise:
1. what types of fish you have in the tank and of you have shrimps?
2. were they oke with your c02 system?
3. are the plants liking it?
Daniella Lopez hi
How can you regulate the co2 intake ? assuming i want 1 bubble/second and i am getting 3 ?
where to get that pipe from?
How long does it work?
22 days
Cool. Subbed.
What kind of yeast can be use? I don't know which yeast in my country. Pls
Don´t really know a lot about yeast. I use the common type that is used for cooking
can i see some picture of it?
Normal baking yeast is okay to use but brewers yeast will last a bit longer. This is the stuff I use and it works well. img.tesco.com/Groceries/pi/393/5015821122393/IDShot_540x540.jpg
hi how do you turn it off at night as plants don't need co2
Moi sa marche pas
anthony pope buy a 2 way airline valve. connect it to the co2 out put and open one of the valves at night to let the Gass escape into your room instead
what is the effect in the room?
Ryan Rojo nothing, this is such a small amount it does not effect room or humans in it
Just leave it there, it doesnt matter it wont do any harm.
Co2 comes right out of first bottle why does almost everyone use two or more bottles when one is really all u need??
for filter
Because when you have 2 bottles you have more control over the reaction and can even turn it off. When you have 1 the reaction is continuous and you end up wasting half the product at night.
what happen if gas escape in my room?
you release more CO2 by breathing out.
how much would a 10gallon need?
unyeah tell me whenever you know
Why would you need a backflash/flow valve? Nothing is burning and i am guessing this is not explosive. Otherwise, thanks.
check valve is needed if the bottle array is at a level lower than you aquarium, once co2 generation stops, the water in the aquarium flows back out due to the siphoning effect. To prevent this a backflow valve/check valve is installed.
ofc the plants like co2. they need it live.
i did this before and my fish died because i didn't do my reshesh and left it on overnight and didn't install a regulator so be careful and do your research
DMAN D LOL
Muy padre :D