Britax One4Life, Front Facing Lap and Shoulder Installation. Car Seat Quicky

Britax One4Life, Front Facing Lap and Shoulder Installation.
This is a general installation video for Britax One4life using a lap and shoulder belt for rear facing. All installations are not the same. Always read your vehicle and car seat manual to achieve a proper installation.
#momhack #momhacks #parenthack #parenthacks101 #carseatsafety #cpst #carseattech #carseattechnician #carseatquicky #babygear #babygearexpert #carseathack #carseathacks #carseateducation #britax #britaxclicktight #britaxone4life #one4life @britax
Local to Los Angeles, CA? Can book car seat installations at www.ITYSafety.com

[@vanessafranklin6735]

does the headrest need to be removed if it’s touching the top of the sea? i just switched my daughter today and im stressing about it so bad

[@carseatquicky.itysafety]

According to One4life manual, it only needs to be removed or adjusted if its preventing the car seat headrest from being adjusted to proper height for child.
"In some cases, the vehicle headrest
can prevent the child restraint
headrest from being raised high
enough to properly adjust the
harness for the fit of your child when
using a forward-facing reclined
position. DO NOT force the child
restraint headrest past the vehicle
headrest. Doing so could cause the child restraint not
to perform as intended. If the location of the vehicle
headrest interferes with the child restraint headrest, raise
or remove the vehicle headrest. If the vehicle headrest
can not be removed, move the child restraint to the
upright position or try a different seating location."

[@vanessafranklin6735]

@@carseatquicky.itysafety thank you so much!