Mene video me bhi kaha hai, ek hi tool se kai type ki pitch bana sakate hain, ye pitch ke according nahi hota, pitch program me dete hain, cost compny to company alag alag hoti hai, 5 to 10 thausand
Software to bahut sare hain, depend karta hai kis company me kon sa use karte hain, Auto cad hai, catia, solid works hai, cam hai, bahut sare hain, bahut institute sikhate hain, or agar ability hai to khud bhi seekh sakte hain
thanks mohit, sorry for inconvenience , here is my typing mistake actually, this is the calculation for z axis movement, if pitch is 1.5 mm and thread per inch is 8 in metric thread, so that we should 1.5/8=0.1875mm this is the actually move in z direction for first cut. are you getting me mohit, please reply
@@CNCVMCTECHNOLOGY sir, thoda kam samajh aaya ,( kaise TPI nikala or kyo move kia Z me ) Please Video ka part 2 bana dijiye and explain on board or any video like this. Because this is the single video on internet available on this topic. I have been searching from long time.
Yes ye actually hass control system me use kar sakte hain, same as ganv me G54 work offset ki jagah hass me G154 use karte hain .And p 1to 99 external offset values ke liye use karte hain.
@@CNCVMCTECHNOLOGY ek confusion aur h sir..jaise ki apne ye programme thread mill cutter se banaya h jo helicaly threadmill kar raha h..aur kuch videos dekhe h mene jisme taping jaisa tool hota h sayad solid carbide thread mill bolte h usko..to sir in dono tools me kya farak hota h?
SIR CAN YOU UPLOAD MM THREAD MILLING PROGRAM IT'S EASILY TO UNDER STAND SO FOR PLEASE UPLOAD THE VIDEO IAM WAITING FOR YOUR REPLY AND VIDEO EG ANY MM THREAD
@@dhanasekare3491 dear it is not possible to convert in english also, that's why I am already all the things shown in written notes also, but I don't know tamil, but if any doubt you can ask any time by comments. I will reply soon.
Good job sir sukhwinder from Punjab
Ok
Super video
Sir Aapne compensation use kiya hai to d ku nahi use kiya ji
Plz make one video on the hexagonal job
Make special video on RHS &LHS Threads to clear the concept.
Sirji namste 🙏
Sir mai outarnar daya u saij ka rediyas program ki jankari lena chahta hu plz kripa kar btaye tq
Thank you sir for this video
thanks yogesh
Tool selection keysa karey thread ka ,konsa tool kis thread mey use hotey hai?
thanks
Thanks for the video Bro..
Welcome, please share and like
Nice video
Thanks sir ..
Thread ko ham free kaise kre. Agar usme coretion kaise kre .
Agar thread tightening ki problem hai to pahle machine ki centre hight check kare, or drill ka minor dia check karen.
Sir vmc par tepper thread kaise banaye
Sir Ham jab Z me 1.5 dhenge tab tool ko X me wapas lena padta hai ki dayrect Z- chlega
Watch once again
hello sir
sir tool konsa use krna hai..
or agar square thread katne ho to...
konsa tool pls Explain...
Hlo sir
Very useful video.
Sir ya tool jo chal rha ha size pitch ka according milta ha???
Nd is ka cost kya hoga???
Mene video me bhi kaha hai, ek hi tool se kai type ki pitch bana sakate hain, ye pitch ke according nahi hota, pitch program me dete hain, cost compny to company alag alag hoti hai, 5 to 10 thausand
Sir 3d ka programmer banne ke liye konsa software sikhna padega or kitne din sikhne me lagjaye ge or kha par sikhathe h please batyega
Software to bahut sare hain, depend karta hai kis company me kon sa use karte hain, Auto cad hai, catia, solid works hai, cam hai, bahut sare hain, bahut institute sikhate hain, or agar ability hai to khud bhi seekh sakte hain
@@CNCVMCTECHNOLOGY
Sir me vmc machine par program dekta hu too kuch bhi samjh nhi aata h btaye ase me khud kase sikh payege
@@vinodKumar-vf4rl ek ek karke video dekhiye samajh me aane lagega
Sir, Thanks a lot for this video.
Waiting for this from a long time.
Please explain little bit more why
z -0.875 is done ...
Please reply..
thanks mohit, sorry for inconvenience , here is my typing mistake actually, this is the calculation for z axis movement, if pitch is 1.5 mm and thread per inch is 8 in metric thread, so that we should 1.5/8=0.1875mm this is the actually move in z direction for first cut. are you getting me mohit, please reply
@@CNCVMCTECHNOLOGY sir, thoda kam samajh aaya ,( kaise TPI nikala or kyo move kia Z me )
Please Video ka part 2 bana dijiye and explain on board or any video like this.
Because this is the single video on internet available on this topic. I have been searching from long time.
ok i will upload soon with full calculation, thanks for comment
@@mohitpahwa3787 ruclips.net/video/U3eWXbFtgrU/видео.html
@@CNCVMCTECHNOLOGY kya sir galat bolre aap
Sir ek OD thread ka bhi video banaye please
I will upload as soon as possible
Sir hass me G154 P99 ka use kese karate he aap bata sakte ho
Yes ye actually hass control system me use kar sakte hain, same as ganv me G54 work offset ki jagah hass me G154 use karte hain .And p 1to 99 external offset values ke liye use karte hain.
Thanks sir
Welcome dear
Sir tapper thread ka programme banaiye pls cnc me
I will update soon
Rajesh Adhikari I
@@Madanalls yes madan ji
Sir..internal thread milling to niche se upar ki taraf hoti hai na?apne is program me upar se niche ki taraf banaya hai kiu?pls reply sir
Thread uper se or niche se dono traf se hoti hai. Puri threading ki videos dekhiye
@@CNCVMCTECHNOLOGY ok sir..thank u..
@@CNCVMCTECHNOLOGY ek confusion aur h sir..jaise ki apne ye programme thread mill cutter se banaya h jo helicaly threadmill kar raha h..aur kuch videos dekhe h mene jisme taping jaisa tool hota h sayad solid carbide thread mill bolte h usko..to sir in dono tools me kya farak hota h?
@@rajesh888cad9 usko thread mill bolte hain or dusare ko index tool, dono alag alag performance dete hain
SIR CAN YOU UPLOAD MM THREAD MILLING PROGRAM IT'S EASILY TO UNDER STAND SO FOR PLEASE UPLOAD THE VIDEO IAM WAITING FOR YOUR REPLY AND VIDEO EG ANY MM THREAD
I will upload soon
@@CNCVMCTECHNOLOGYsir please upload the video in English or Tamil language
@@dhanasekare3491 dear it is not possible to convert in english also, that's why I am already all the things shown in written notes also, but I don't know tamil, but if any doubt you can ask any time by comments. I will reply soon.
@@CNCVMCTECHNOLOGY sir thanks for replying please upload MM THREAD iam waiting for your video Sir👍🤝
@@dhanasekare3491 ok
Sir but isse may threading tool ka dia calculate nhi karna padhta
Ha aur sir hum ismai L and p value use kar skate hy kya
Puch rahe ho ya bata rahe ho
@@cibinmatthew3165 depend karta hai control system pe
Control system tho fanuc oi mf he hai sir
Agar semein system hota toh ye program run hoga kya sir
Poshat song
Sir ye program kabhi chalega hi nahi, Mai aapko chalange kr Sakta hoon...iss program Ko machine pe chala k dikha do...
chala ke dikha to rakha hai, or kya dekhna chahate ho, kya querry hai aapki wo batao, or pahle aap machine me run karwa lo, uske baad challange karna,
Thanks sir