There is a steel bar behind each counterweight raising cylinder (40-50mm diameter), this sits slightly lower than and behind the top of the counterweight hooks when raised, 1 each side.
Those counterweight way aloy wich holds them on and the crane is level, if the crane is out of level far enuf for them to fall off you got bigger things to worry about. I work with grove cranes of this size and bigger almost daily
@@BixFix In was ? 🤔 Einem verlogenen Ex-Präsidenten seine Lügen/Unwahrheiten zu glauben, darin bestimmt. Aber in Schwerlast und Krantechnik mit Sicherheit nicht !
@@markusfrombgen2967 Sie nutzen youtube, eine amerikanische Plattform. Was hat Deutschland zu bieten? Und wenn Trump wieder Präsident werden sollte (Biden, der "Demokrat", hat es ja vergeigt), dann hat Trump mehr Macht im kleinen Finger als der gesamte Wanderzirkus zusammen, der sich deutsche Regierung nennt. 😄
@@ΛΠΣλ Sag wer ? Ein Grieche !? Oder was soll der "Name" sein ? 🤔 Auf jeden Fall nichts, was in irgendeiner Weise beeindruckt, eher lächerlich. 🙊 Traum ruhig weiter. Und von Politik haste eh genauso viel Ahnung wie Trump von Gerechtigkeit, Empathie und Demokratie. Und tschüss. 👋👋
@@futurepathtake it easy man. I’ve seen this particular crane in action raising a tower crane with all seven tele sections fully extended and only half CW loaded!! The machine is a piece of art
Ein sehr schöner automobilkran. Wisst ihr schon wann dieser als Modell raus kommt und man den bei euch auf der shopseite kaufen kann? Da ich kein Kranführer oder im bauunternehmen bin, sondern noch in der Schule muss ich mich mit den Modellen zufrieden geben.
Change the frontlights on the chassi once and for all… to proper light 💡 strength for vinterperiod in scandinavia…. Pleeeease 🙏🏽 !! I wish a crane-constructor guy from Ehingen could come and drive my LTM 1070-4.2 a dark rainy november night in Sweden… I don’t think he will be impressed then…. Liebherr - you are better than this… Best Regards from Johan
winter? i've driven cranes where even on a normally lit street in normal weather at 10pm they're still too weak, and part of that is because the vertical position of the lights are so high up compared to cars, that they dont light up the road close in as much, which for night shifts when you dont have a decent banksman for help positioning the crane for setup often forced me to shunt and guess and get pissed off because the banksman didnt see there's a grid where my rigger will end up and the method statements usually forget this stuff... when there even IS a method statement with berthing study.
You know, you can order the "lightings" optional kit. 4 xenon’s light on the front to replace the halogen original and they put 8 led’s around the turret and one over each support legs
I know the 1300 is the tonnage of the crane 300 tons the 6 is the amount of axles it carries but what is the .3 for I know in other cranes it's the amount of engines on board but I know you can't fit 3 engines why I'm asking
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
The camera in the boom tip pointing down at the block is a great feature!
love to all liebherr cranes❤️
When the counterweight is hung on the superstructure, what keeps it from falling off either sideways, should the crane flip over?
There is a steel bar behind each counterweight raising cylinder (40-50mm diameter), this sits slightly lower than and behind the top of the counterweight hooks when raised, 1 each side.
It gets squeezed by the cyliner
Those counterweight way aloy wich holds them on and the crane is level, if the crane is out of level far enuf for them to fall off you got bigger things to worry about. I work with grove cranes of this size and bigger almost daily
Powerful crane congrats liebherr👏👏👏👏👏
We believe in Liebherr💯💯🇺🇸
Nope - support American products and companies. America is the leading country of the World.
@@BixFix
In was ? 🤔
Einem verlogenen Ex-Präsidenten seine Lügen/Unwahrheiten zu glauben, darin bestimmt.
Aber in Schwerlast und Krantechnik mit Sicherheit nicht !
@@markusfrombgen2967 Sie nutzen youtube, eine amerikanische Plattform. Was hat Deutschland zu bieten?
Und wenn Trump wieder Präsident werden sollte (Biden, der "Demokrat", hat es ja vergeigt), dann hat Trump mehr Macht im kleinen Finger als der gesamte Wanderzirkus zusammen, der sich deutsche Regierung nennt. 😄
@@ΛΠΣλ
Sag wer ?
Ein Grieche !? Oder was soll der "Name" sein ? 🤔
Auf jeden Fall nichts, was in irgendeiner Weise beeindruckt, eher lächerlich. 🙊
Traum ruhig weiter. Und von Politik haste eh genauso viel Ahnung wie Trump von Gerechtigkeit, Empathie und Demokratie.
Und tschüss. 👋👋
@@BixFix But Manitowoc also produces also in Germnay...
New strength👑
Como sempre a Liebheer se superando em qualidade e segurança
Krass. Danke fürs Zeigen
90m of main boom? holy shit.
@@futurepath kepp in mind these cranes are mostly used because of their ability to reach so far
@@futurepathtake it easy man. I’ve seen this particular crane in action raising a tower crane with all seven tele sections fully extended and only half CW loaded!! The machine is a piece of art
Ein sehr schöner automobilkran. Wisst ihr schon wann dieser als Modell raus kommt und man den bei euch auf der shopseite kaufen kann? Da ich kein Kranführer oder im bauunternehmen bin, sondern noch in der Schule muss ich mich mit den Modellen zufrieden geben.
Brilliant! Only seen in German's techs.
메인붐 길이 실화냐 가슴이 웅장해진다
Yes dear it is!
지~ 우뉴니 형?ㅋㅋㅋㅋㅋㅋ
@@하하자매일상 야 조용히해 ㅋㅋㅋㅋ
Nyoto mas,Mergi aku gowo 85T wae dawane 46m
sarens best mega crane in the world
LIEBHERR 😍
Change the frontlights on the chassi once and for all… to proper light 💡 strength for vinterperiod in scandinavia…. Pleeeease 🙏🏽 !!
I wish a crane-constructor guy from Ehingen could come and drive my LTM 1070-4.2 a dark rainy november night in Sweden… I don’t think he will be impressed then…. Liebherr - you are better than this…
Best Regards from Johan
I feel your comment!
winter? i've driven cranes where even on a normally lit street in normal weather at 10pm they're still too weak, and part of that is because the vertical position of the lights are so high up compared to cars, that they dont light up the road close in as much, which for night shifts when you dont have a decent banksman for help positioning the crane for setup often forced me to shunt and guess and get pissed off because the banksman didnt see there's a grid where my rigger will end up and the method statements usually forget this stuff... when there even IS a method statement with berthing study.
You know, you can order the "lightings" optional kit. 4 xenon’s light on the front to replace the halogen original and they put 8 led’s around the turret and one over each support legs
The CEO not the driver. Should be standart imo
What does it take on full boom? 8 tonns mayby?🤔
Pure beauty
💪💪💪
Thats a tall one. 90 meters O_O I hope I will see one. Maybe at an event of Mammoet??
Very nice job
Show 💯
That is ridiculously scary.
Aí e considerada, liebheer...
Wah mantebbb tenan...
붐으로만 들어야겠네 휴
I know the 1300 is the tonnage of the crane 300 tons the 6 is the amount of axles it carries but what is the .3 for I know in other cranes it's the amount of engines on board but I know you can't fit 3 engines why I'm asking
Third iteration of the model, previous being 1300-6.2 1300-6.1
@@4natem oh ok thanks a mil
i would love to operate this! but not drive the truck lol
립벨 굿~
Автокраны лейбехрр сам оператор автокрана хочу работать на таких кранах из зарботавать большие деньги с уважением
Good luck
와길이가90센티에요.
Show
Im
A intermed rigger/dogman 20 + years experience in australia and if i hooked a electric motor by the lug on top iwould be sacked
The video is too short and edgy to covey any info.
Je me de formation des grues d'importer je suis Grütli o Congo Brazzaville plus de fonctionnement
Sick lol.
weak rubberboom and no TN? good luck....OH and no liccon 3?!!
Love ❤️ for these 🏗️ cranes