If I had been able to watch your videos sixty years ago the world would have been saved a whole lot of grief! I was one of those little boys who wanted to know how things worked. Back in those days the blue haired library ladies were very reluctant to let a ten year old kid take "adult" books on machinery home and so began my career of taking everything I could get his hands on apart. Of course, at first I had no ability to put any of those objects back together. Out came the hairbrush applied to my backside on many occasions. It took many years of dismantling before I could cover my educational activities by successful reassembling what I was looking into. You have no idea how much respect I have not only for what you are now doing but for all those years teaching young boys. Very nice video, many thanks!
Brilliant. Thank you. I’ve always wondered about these chucks which I use almost every day. So satisfying to know their workings. You are a true craftsman.
Now that I have tried to dis-assemble my Jacobs 33AB 1/2" chuck, there are two important points missed here. 1) the jaws should not be at the base of the chuck (all the way open). That's what I did and as the sleeve came off, it damaged all three jaws near their bases. Setting them about half way would be ideal. 2) There is a center holding screw keeping the chuck from unscrewing if the drill is operated CCW. I did not know about this LEFT handed screw. Ouch!!! Wound up stripping it out.
Excellent demonstration - you old favourite 'the cut-away' really helps to show how it works. Thanks for all of your wonderful videos - they have taught me so much over the years. Keep 'em coming.
I have rebuilt many Jacobs superchucks and they are a fine piece that will last for years and stay true provided you don't let a bunch of bits slip and spin in them. It was nice meeting you at the NYCCNC event. Feel free to check out my Old Barn/Shop channel for a dose of heavy iron.
DANG! I was thinking about going just to see Keith Fenner and Adam's show down but Mr Pete would have sealed the deal!!!! Keep at it, someone said your "what makes it work" is "ave without the swearing" and it's so true. Great stuff!!
Just checked out my Jacobs 1/2" chuck after seeing this vid, it's been in the back of my Bridgeport tool cupboard for ages. Never did use it because drills etc ran out of true. Stripped it down as described and permutated the jaw positions, I now have a chuck that runs within a few thou. By the way, I'm nearly seventy and time served engineer, so it's never too late to learn. Thanks Mr Pete and keep them coming.
Greeting from a Carolina machinist I learned a lot from this instructive video on a fairly complex and useful tool. Keep teaching, we're never to old to learn new tricks.
....No matter how much we know, always a pleasure to hear you explain it....again....Thank You...! And.....amazing the amount of 'grip' you can attain with this simple design...no beating or hammering, except for these demonstrations.....!!!
I've watched some 6 videos on pulling apart chucks 'what a piece on ingenuity - thank you for your explanation and time spent editing. I've recently heard the saying when an old man dies a library burns down Most younger people nowadays don't know which end of the screwdriver to hit with the hammer again Thank you for this
Excellent video Mr. Pete, as usual, i should say. These chucks are some of the best ever made. I have a small collection of them that's been passed down from grandpa to me and outside cleanup and a jaw set replacement they've never failed me or their previous owners. Some tools are done just right.
I bought a big Jacobs chuck at an estate sale last month for $15 that had a 1 1/2- 8 thread on the back, it made my day when it fit perfectly on my atlas lathe.
I finally took am old crusty one apart a few years ago in order to clean it up and finally got to see how it works. Pretty darned cleaver, whoever came u with this concept. THE three jaw lathe chuck works on a similar principal.
Mr. Pete, as always I enjoyed your Jacobs Chuck video. I recently replaced my (1990's vintage Taiwanese but descent) Drill Press Chuck for a brand new old stock made in the USA Jacobs 14N. I also have a Jacobs 18N and a tiny 0 also made in USA - I got from my Dad. Believe it or not you can still find a NOS on Fleabay if you look hard enough and have the time and patience. They also still have NOS re-build kits for the old Chucks too. The new production Jacobs are not terrible but certainly not as good as the original USA models. I've got an older MSC 1HP floor model Industrial rated Drill press ( early 90's production) that is a really descent machine. You might not believe this but the Run Out is only .0015" measured with Federal and Starrett gauges. I got this DP new and have taken good care of it throughout the years. What makes it more special is that my Dad bought it for my 40th Birthday!
Thanks MrPete! I am really glad I'm not going to go to my grave not knowing things like this, I feel bad for everyone that lived before RUclips haha....they had to cut it up themselves or just not know. My dad was really smart and knew all these things....I bet he spent a lot of time cutting things up....also he learned about a lot of stuff when I took something apart and he had to put it back together!
Another great explanation. I think I know a lot about something and I'll watch one of your videos and always get a better understanding. Thanks for all the work you do to pass on your knowledge! Brian
Mr. Pete, I disassembled my chuck and did not realize the jaws had to be in a specific order and never could get it to close all the way after the tear down. Tomorrow will be fix it day.
Everyone's first-time-disassembling-a-chuck mistake. :) Pickled my brain for weeks how a crunchy but otherwise very precise J'sC wouldn't close right when it struck me that they must grind them just like they do with lathe chucks.
Great job Lyle, Thanks for the experience, time , money and detailed information that you put in all the videos. There is one thing that baffles me and it is why there always are about 10 people that dislike your work... I guess jealousy or just foolishness is the motivation.
I just want to let you know, I joined a community on Facebook that deals with machining, and on post after post, you are mentioned as a source for good information about machines and machining. I don't know if this reflects in your numbers, but you are definitely noticed. Best wishes, Tubalcain.
"Ehh, about twenty other guys have done that already." Just kidding, only repeating your own words for fun. Honestly, yours is the best explanation I've seen so far. Thank you! (Edit: After watching 3 other videos, I'm a subscriber. Great stuff!)
Fantastic walkthrough. Your cutaway videos have become my favorite, must-watch series from you. Thanks for sharing! (and thrilled to see you with Diresta et al)
Why am I just finding out you have a "what makes it work" series after 25 entries! I NEED to watch these. well so much for doing anything productive tomorrow :-)
Now I know why the hand-tightened chuck on my cordless drill is so hard to get tight enough on a bit so it does not slip. The mechanism needs a little lube in the right places! Thanks for the demo and info.
That was quite interesting. I didn't know how to get the sleeve off. I have one that has some metal shavings in it, and doesn't turn very well when locking a bit in it. Now I do. Thank You!!!
Brilliant, I Wreckon once the jaws have been replaced,place in the freezer,using elastic band to hold the two halfs, Warm the outer cover slightly ,then pull the inner out of the freezer and slip the outer cover on,would this work or would the outer sleeve shatter once toutching the frozen inner section, I would be intresred watching if you would try with a none functiong one,
Yeah there was this guy who was showing this at Radio City with the Rockettes kicking their lags on a rotating turnstile while Bing was singing " some times you feel like a split nut.",,,,, but that guy didn't show any patent drawings to us.
I seen you at NYCCNC Zanesville the other day, holding a camera in the background. Unfortunately I didn't recognize you until I got home. Would have loved to personally thanked for all your videos you create. Perhaps next year I will get the opportunity.
What are your thoughts on the effect on a drill chuck of using a Wagner Safe-T-Planer, or similar rotary planer? They require the jaws to be almost fully opened. I also love studying patents! Scott
@@mrpete222 I did a video on the rotary planer last week and already expressed my unfounded concerns about using it with a drill chuck. I owe my subscribers a follow-up and intend to mention your insights. Any chance you'd be open to recording a statement about this that I could include? I have a small but loyal audience of Shopsmith users, so it's not like I can make a compelling offer for a collaboration, but even so, it would be a thrill if you'd be interested. I could arrange a Zoom meeting. Scott
That Stoner patent must have been for an improvement. I found a patent granted to A. I. Jacobs in 1902 for the chuck. It is patent number 709014. You can easily find it by going to google patents and searching by either "Jacobs drill chuck", or the patent number. I like the style of the patent drawings and have discovered a lot of them granted to Laroy Starrett, including the RPM indicator that you did a video on.
So I suppose the question is in the premium chucks, where do they introduce the ball bearings? I figure it must be between the split nut and the body since that's the only frictional surface but I could also see them between the body and the jaws.
Yeah, i was about to say....the cheaper ones still cost as much as a decent cordless drill/impact set almost. But, had i known how cs really are back when I'd own quite a few and have a nice sized savinggs from scrap yards too
Robert Grant -- it's more than "friction"... it's an "interference fit"... hence the need for a press to disassemble/reassemble (but the cutaway still has a tight-enough fit to make it work as shown here).
Kev - An interference fit relies on friction, a lot of it but it's still just static friction. My question was more about there being no key or spline, hence the shell could be pressed on with any alignment.
Kev - I had intended to but decided to keep it brief. Long version: I'd like to have seen more about how the shell engages the nut and how the nut is made. The shell moves the nut through friction from an interference fit but it's not that simple. The nuts is machined and then split. Doing that and maintaining the tight tolerance seems quite something to me. I thought whatever mojo goes into the manufacture of these chucks deserves more coverage.
Great job, Mr. Pete. I'll bet there were a lot of unhappy customers finding those broken nuts in those boxes. So, do they break them at the factory or do they cut them? I would think cutting, but then that would result in at least some small loss of material, which in this case might be an immaterial loss of material, if you'll pardon the pun. If they do indeed break them they must have some method of ensuring they just end up with 2 (and not 3 or 4) pieces and also they would need a way of preventing bending or warping the part.
Matching broken pieces like this are machined and then hardened. While still full hard a notch is ground on each side and they are impact broken so they don't distort or shatter. They are then tempered in an oxygen free furnace to avoid scale, assembled, clamped together and the threads ground to size. If you take a HSS tool-bit and notch it then bend it, it will break but the ends will distort so it won't go together evenly. But if you smack it with the correct force and speed while holding one side at the notch they break cleanly and fit together nicely. I have seen 2 chucks that had 2 piece nuts and they would occasionally bind as the machined split passed a jaw. Irritating because each had certain sizes of drill that wouldn't tighten properly and would spin. They eventually went to the scrap bin. If you have a chuck that spins some drills this may be why. Mike (o\!/o)
If you were to recommend a "new" lathe for a hobbyist, what would you choose? Are the Grizzly lathes worth getting, or would you recommend something else?
Got a #19 Super Chuck that has one jaw that will not extend with the other two and is jammed in so the chuck will only retract - open? - half way. The chuck isn't rusted or been beaten on. Any suggestions how to get the thing apart so I can assess the damage, clean and lube the thing? I tried pressing it apart as usual but there was clearly something jammed by the out-of-position jaw.
I always wondered how those worked. I had rough idea but never saw a cutaway with demonstration. Very informative. Thank You
Very welcome
If I had been able to watch your videos sixty years ago the world would have been saved a whole lot of grief! I was one of those little boys who wanted to know how things worked. Back in those days the blue haired library ladies were very reluctant to let a ten year old kid take "adult" books on machinery home and so began my career of taking everything I could get his hands on apart. Of course, at first I had no ability to put any of those objects back together. Out came the hairbrush applied to my backside on many occasions. It took many years of dismantling before I could cover my educational activities by successful reassembling what I was looking into. You have no idea how much respect I have not only for what you are now doing but for all those years teaching young boys. Very nice video, many thanks!
Brilliant. Thank you. I’ve always wondered about these chucks which I use almost every day. So satisfying to know their workings. You are a true craftsman.
😀😀
Now that I have tried to dis-assemble my Jacobs 33AB 1/2" chuck, there are two important points missed here. 1) the jaws should not be at the base of the chuck (all the way open). That's what I did and as the sleeve came off, it damaged all three jaws near their bases. Setting them about half way would be ideal. 2) There is a center holding screw keeping the chuck from unscrewing if the drill is operated CCW. I did not know about this LEFT handed screw. Ouch!!! Wound up stripping it out.
Thanks mrpete for sacrificing one of your chucks so you could show how they work, very interesting and how precision made they are, thank you John
been using Jacobs chucks 30 years , never knew how they worked. Thank you
Sam Davis
same here..interesting and good to know
Excellent demonstration - you old favourite 'the cut-away' really helps to show how it works. Thanks for all of your wonderful videos - they have taught me so much over the years. Keep 'em coming.
Thanks for watching
I have rebuilt many Jacobs superchucks and they are a fine piece that will last for years and stay true provided you don't let a bunch of bits slip and spin in them. It was nice meeting you at the NYCCNC event. Feel free to check out my Old Barn/Shop channel for a dose of heavy iron.
DANG! I was thinking about going just to see Keith Fenner and Adam's show down but Mr Pete would have sealed the deal!!!! Keep at it, someone said your "what makes it work" is "ave without the swearing" and it's so true. Great stuff!!
Thank you again for allowing us to see behind the curtain and have a much better understanding....
Just checked out my Jacobs 1/2" chuck after seeing this vid, it's been in the back of my Bridgeport tool cupboard for ages. Never did use it because drills etc ran out of true. Stripped it down as described and permutated the jaw positions, I now have a chuck that runs within a few thou. By the way, I'm nearly seventy and time served engineer, so it's never too late to learn. Thanks Mr Pete and keep them coming.
Awesome--so someone had assemble it incorrectly
Greeting from a Carolina machinist I learned a lot from this instructive video on a fairly complex and useful tool. Keep teaching, we're never to old to learn new tricks.
....No matter how much we know, always a pleasure to hear you explain it....again....Thank You...! And.....amazing the amount of 'grip' you can attain with this simple design...no beating or hammering, except for these demonstrations.....!!!
I love all the "What Makes It Work" videos. This was no exception. Thanks for taking the time to make the cutaway Mr. Pete!
Thanks for sacrificing the old chuck to make a much clearer instructional video than it would have been otherwise.
I've watched some 6 videos on pulling apart chucks
'what a piece on ingenuity - thank you for your explanation
and time spent editing.
I've recently heard the saying when an old man dies a library burns down
Most younger people nowadays don't know which end of the screwdriver to hit with the hammer
again Thank you for this
Thanks
Thank You Sir. I have used Jacobs chucks for about 60 years and now I understand how they work..............Jay
Wonderfully done....Thank you.....just am in awe of the simplicity of the patent illustrations.
Excellent video Mr. Pete, as usual, i should say.
These chucks are some of the best ever made. I have a small collection of them that's been passed down from grandpa to me and outside cleanup and a jaw set replacement they've never failed me or their previous owners. Some tools are done just right.
Thanks Mr. Pete. A well thought out video explaining what we all should know, but just take for granted.
Thank you for EXCELLENT tutorial. I love the cutaway and the old instructions.
I guess it's kinda off topic but does anybody know a good site to stream newly released series online?
@Maverick Graysen I use Flixzone. You can find it by googling =)
I bought a big Jacobs chuck at an estate sale last month for $15 that had a 1 1/2- 8 thread on the back, it made my day when it fit perfectly on my atlas lathe.
Great video as always , love the working cutaway . A must for us folks who NEED to know how things work .
Most excellent, sir. Many are in your debt for doing all these videos.
Excellent demonstration. Beautiful description of how that chuck works. Thanks
Never knew how they worked until now. Thanks for sharing.
I finally took am old crusty one apart a few years ago in order to clean it up and finally got to see how it works. Pretty darned cleaver, whoever came u with this concept. THE three jaw lathe chuck works on a similar principal.
Mr. Pete, as always I enjoyed your Jacobs Chuck video. I recently replaced my (1990's vintage Taiwanese but descent) Drill Press Chuck for a brand new old stock made in the USA Jacobs 14N. I also have a Jacobs 18N and a tiny 0 also made in USA - I got from my Dad. Believe it or not you can still find a NOS on Fleabay if you look hard enough and have the time and patience. They also still have NOS re-build kits for the old Chucks too. The new production Jacobs are not terrible but certainly not as good as the original USA models.
I've got an older MSC 1HP floor model Industrial rated Drill press ( early 90's production) that is a really descent machine. You might not believe this but the Run Out is only .0015" measured with Federal and Starrett gauges. I got this DP new and have taken good care of it throughout the years. What makes it more special is that my Dad bought it for my 40th Birthday!
Thanks MrPete! I am really glad I'm not going to go to my grave not knowing things like this, I feel bad for everyone that lived before RUclips haha....they had to cut it up themselves or just not know. My dad was really smart and knew all these things....I bet he spent a lot of time cutting things up....also he learned about a lot of stuff when I took something apart and he had to put it back together!
Another great explanation. I think I know a lot about something and I'll watch one of your videos and always get a better understanding. Thanks for all the work you do to pass on your knowledge! Brian
WOW! never had a reason to wonder how it worked -- but impressed indeed!! THANK YOU!!!
That was a great vid Lyle. I really think you are the first to go into so much detail. Thank you.
This is great. It was just like watching the coaster brake video, they both have been part of my life forever but I had no clue what made them tick.
Thanks for sacrificing your treasures for the learning of others.
thank you Mr Pete I actually learn from and enjoy your videos
Mr. Pete,
I disassembled my chuck and did not realize the jaws had to be in a specific order and never could get it to close all the way after the tear down. Tomorrow will be fix it day.
Everyone's first-time-disassembling-a-chuck mistake. :) Pickled my brain for weeks how a crunchy but otherwise very precise J'sC wouldn't close right when it struck me that they must grind them just like they do with lathe chucks.
The wisdom you have. Really enjoy your videos.
Great job Lyle, Thanks for the experience, time , money and detailed information that you put in all the videos.
There is one thing that baffles me and it is why there always are about 10 people that dislike your work... I guess jealousy or just foolishness is the motivation.
just meaness
Excellent video Mr. Pete! I've never had one apart before; learned something new! And with a great Tubalcain Cutaway!
I just want to let you know, I joined a community on Facebook that deals with machining, and on post after post, you are mentioned as a source for good information about machines and machining. I don't know if this reflects in your numbers, but you are definitely noticed. Best wishes, Tubalcain.
Thank you very much, I was unaware of that
"Ehh, about twenty other guys have done that already."
Just kidding, only repeating your own words for fun. Honestly, yours is the best explanation I've seen so far. Thank you!
(Edit: After watching 3 other videos, I'm a subscriber. Great stuff!)
i learn something new every time i watch... Thanks for sharing sir..
Well worth the effort on your part to show the cutaway Liked a lot.
never thought it was like my 3 jaw chuck but now that you've shown it I see how else would it work. thanks tubal
Excellent as ever. Thanks for taking the time to this, it's appreciated.
Fantastic walkthrough. Your cutaway videos have become my favorite, must-watch series from you. Thanks for sharing! (and thrilled to see you with Diresta et al)
I'm glad you like the cutaways---THANKS FOR WATCHING
Fabulous video! It answers questions I've had since childhood.
Best Educational Videos on RUclips! Keep up the good work!
-Dean
Why am I just finding out you have a "what makes it work" series after 25 entries! I NEED to watch these. well so much for doing anything productive tomorrow :-)
Stay home from work and WATCH those videos.
Thanks for the info, very well presented!
Great demo.
Thank you very much teacher. I like your lessons.
Wow that’s awesome! Nice cutaway!
Excellent Mrpete
Thanks Mr. Pete
Just discovered you Sir- fascinating and educational! Thank you for your time & wisdom!!!
👍👍
this is awesome. I always wondered what exactly was inside ofnthose
wished I had this video about a year ago. messed up a Chuck cause I skipped a step. 150 dollar mistake.. but I now know. thanks Mr pete
Now I know why the hand-tightened chuck on my cordless drill is so hard to get tight enough on a bit so it does not slip. The mechanism needs a little lube in the right places! Thanks for the demo and info.
As always some of the best on the internet
Thanks
That was quite interesting. I didn't know how to get the sleeve off. I have one that has some metal shavings in it, and doesn't turn very well when locking a bit in it. Now I do.
Thank You!!!
Thanks for the very interesting video now I know how its work.
Brilliant,
I Wreckon once the jaws have been replaced,place in the freezer,using elastic band to hold the two halfs,
Warm the outer cover slightly ,then pull the inner out of the freezer and slip the outer cover on,would this work or would the outer sleeve shatter once toutching the frozen inner section,
I would be intresred watching if you would try with a none functiong one,
great video. Thanks!!
Thank you for watching
Thanks for another great educational video.
Thank you Mr. Pete.
That was very interesting.
Wow thanks for this video. A lot of effort and a chuck sacrificed to the youtube gods for this one :)
Another great video sir. Thank you.
I can only guess how much fun it was to machine one of these before CNC came along.
I learned something new today; thank you very much, Greg.
Who's Greg?
Me!
Very cool, thanks for the video and your time to make it. :-)
Always learn something, I wish you were a teacher when I was in school!
Yeah there was this guy who was showing this at Radio City with the Rockettes kicking their lags on a rotating turnstile while Bing was singing " some times you feel like a split nut.",,,,, but that guy didn't show any patent drawings to us.
This is one of cleverest mechanism
Great video, I always wondered how they be worked.
I seen you at NYCCNC Zanesville the other day, holding a camera in the background. Unfortunately I didn't recognize you until I got home. Would have loved to personally thanked for all your videos you create. Perhaps next year I will get the opportunity.
Sorry I missed you
thanks for your sharing
can you make video in whats makes work a keyless drill chuck?
thanks
Well done.
What are your thoughts on the effect on a drill chuck of using a Wagner Safe-T-Planer, or similar rotary planer? They require the jaws to be almost fully opened. I also love studying patents! Scott
No problem I have use one hundreds of times
@@mrpete222 Excellent. Me too, but always on a Shopsmith with a 1/2" router chuck.
@@mrpete222 I did a video on the rotary planer last week and already expressed my unfounded concerns about using it with a drill chuck. I owe my subscribers a follow-up and intend to mention your insights. Any chance you'd be open to recording a statement about this that I could include? I have a small but loyal audience of Shopsmith users, so it's not like I can make a compelling offer for a collaboration, but even so, it would be a thrill if you'd be interested. I could arrange a Zoom meeting. Scott
That Stoner patent must have been for an improvement. I found a patent granted to A. I. Jacobs in 1902 for the chuck. It is patent number 709014. You can easily find it by going to google patents and searching by either "Jacobs drill chuck", or the patent number. I like the style of the patent drawings and have discovered a lot of them granted to Laroy Starrett, including the RPM indicator that you did a video on.
Bravo! Might we see an explanation on how those pesky keyless chucks work?
nicely done.
thank's Teacher.
One of the best things ever seen. Mr Pete, according to your knowledge, what makes a chuck accurate?
THANK YOU...for sharing.
So, that was cool! Learn something with each video, thank you!
Dollar bill origami bow tie
Huh?
very informative.
Thanks.
So I suppose the question is in the premium chucks, where do they introduce the ball bearings? I figure it must be between the split nut and the body since that's the only frictional surface but I could also see them between the body and the jaws.
Awesome explaining 👏👏👏👏👏
Thanks
Yeah, i was about to say....the cheaper ones still cost as much as a decent cordless drill/impact set almost. But, had i known how cs really are back when I'd own quite a few and have a nice sized savinggs from scrap yards too
GREAT VIDEO !!!
Is the chuck on a cheap hand power drill constructed the same way?
Needed to weld our big Jacobs chucks ..tapers too short for the MT 4 adapter
GREAT VIDEO thank you very much!
Does the shell drive only drive the the nut through friction?
Robert Grant -- it's more than "friction"... it's an "interference fit"... hence the need for a press to disassemble/reassemble (but the cutaway still has a tight-enough fit to make it work as shown here).
Kev - An interference fit relies on friction, a lot of it but it's still just static friction. My question was more about there being no key or spline, hence the shell could be pressed on with any alignment.
Robert Grant -- of course interference is a form of friction... but you didn't mention keys or splines in any way.
Robert Grant -- of course interference is a form of friction... but you didn't mention keys or splines in any way.
Kev - I had intended to but decided to keep it brief.
Long version: I'd like to have seen more about how the shell engages the nut and how the nut is made. The shell moves the nut through friction from an interference fit but it's not that simple. The nuts is machined and then split. Doing that and maintaining the tight tolerance seems quite something to me. I thought whatever mojo goes into the manufacture of these chucks deserves more coverage.
Great job, Mr. Pete. I'll bet there were a lot of unhappy customers finding those broken nuts in those boxes. So, do they break them at the factory or do they cut them? I would think cutting, but then that would result in at least some small loss of material, which in this case might be an immaterial loss of material, if you'll pardon the pun. If they do indeed break them they must have some method of ensuring they just end up with 2 (and not 3 or 4) pieces and also they would need a way of preventing bending or warping the part.
Matching broken pieces like this are machined and then hardened. While still full hard a notch is ground on each side and they are impact broken so they don't distort or shatter. They are then tempered in an oxygen free furnace to avoid scale, assembled, clamped together and the threads ground to size.
If you take a HSS tool-bit and notch it then bend it, it will break but the ends will distort so it won't go together evenly. But if you smack it with the correct force and speed while holding one side at the notch they break cleanly and fit together nicely.
I have seen 2 chucks that had 2 piece nuts and they would occasionally bind as the machined split passed a jaw. Irritating because each had certain sizes of drill that wouldn't tighten properly and would spin. They eventually went to the scrap bin. If you have a chuck that spins some drills this may be why.
Mike (o\!/o)
I've heard sometimes that a drill chuck should be tightened from all three positions. What does my favorite shop teacher advise?
thanks, just got a new chuck that needs some gunk removal, and now i know!
cant wait for the next one!
First time I have seen the inside of a geared chuck. interesting.
what a cool mechanism
Thanks
If you were to recommend a "new" lathe for a hobbyist, what would you choose? Are the Grizzly lathes worth getting, or would you recommend something else?
get an atlas or south bend
Got a #19 Super Chuck that has one jaw that will not extend with the other two and is jammed in so the chuck will only retract - open? - half way. The chuck isn't rusted or been beaten on. Any suggestions how to get the thing apart so I can assess the damage, clean and lube the thing? I tried pressing it apart as usual but there was clearly something jammed by the out-of-position jaw.