I would love to see an update on how well, or not, it has performed over the years. We’re there issues? Did you need to reapply? Did it damage anything? Did snow age it? Did it perform as advertised, or better?
This is indeed a great solution to saving electric in the summers. The problem is that in many many suburbs, the home owners associations have very strict bylaws/guidelines on what you can do to your roof for not only the color, but the materials as well... Until those rules are changed, you will spend more than the cost of your house trying to fight their lawsuits from them trying to make you replace the roof to within their guidelines. You can also get the ceramic paint additive to paint the exterior walls if you have a west facing "hot wall". Painting the west wall alone resulted in almost a 15 degree change of that one rooms sidewall.
I painted my roof last week with hydrated lime mixed with water. a 50 pound bag costs about 7 dollars.(available hardw.store). I bought 2 bags to cover my 1000 square foot house plus carport. my attic temperatures went down from about 140 degrees down to below 100 degrees. my house stays below 82 degrees all day and all night long now. I think what i used might wash off after a summer or 2... but it only costed me less than 15 bucks!!! My house used to be 10 degrees hotter (with AC off)
@@samrajahangir4635 Yes they get dirty after a few years..and then you have to hire someone to clean it. But even under the dirt they still provide a cooling effect.
This product has thermal properties, so its not bad in the winter. It will resist heat leaving thru the roof. Winter BTU's into house are limited anyway. Regardless, your savings is so great during the summer it would out weigh the loss in the winter.. But there isn't any.
The ceramic make up of SUPER THERM is not dependent on reflectivity alone. The ceramic blend does not absorb heat which is the main purpose of the coating. Reflecting heat off the surface is important, but more important is the ability of the coating to resist the loading of heat to block the heat load to the surface or envelope of the building. If one blocks initial "heat load", the true insulation effect has been met.
If anyone here doesn't get it or doubts it... return to Pre K, light color cool dark color warm in summer.... I used Henry Solar Flex 287. Cost was $340, annual electric savings since was $420 per year. I also extened the life of my worn shingles and the AC as it comes on less frequently. ROI 0.76 even the dumbest venture capitalist should get that one.
this sound perfect for the summer time. now my question is how is it on the winter time when the tempetures are bellow 0 degrees? does it absorb heat to help reduce the use of the furnace or will the house be colder than usual?
During the summer, You should paint the roof white during the day to reflect the heat, and paint the roof black during the night to radiate the heat back to space. During the winter, you should paint the roof black during the day to absorb the heat, and paint the roof white during the night so the roof does not radiate the heat back to space.
For one, the angle of the sun in the winter is far lower and the amount of heat gain is greatly reduced. 2nd this is not paint, it's a insulative coating. It will keep the heat inside the house from escaping thru the roof.
Yes, this coating, made for this type of application has ceramics that are "designed" for lack of a better word for mostly reflective purposes. However, I've also used their HSC (hot surface coating) against the sheathing between studs. This product uses different ceramics to prevent heat absorption. For instance, I hit it with a torch for over 20 seconds and could immediately touch it with my hand. I don't work SPI coatings, but i suggest going on their website and reading about it.
Thanks for this excellent video!! One thing though, for very steep roofs, bright reflectance could be an issue (I mean visual comfort), BUT, for flat roofs and low steep roofs, it's the best solution ever.
Some people paint the sheathing as a radiant barrier, then install shingles on top. Probably less effective, but would have a normal look. Solar panels can also be obnoxious for the same reason.
I think it's great. This and green roofs would help lower the ambient temperature in cities too. NYC can get miserably hot in summer with all the concrete and tar roofs soaking up heat.
This idea gets even better now when a passive irradiative cooling type of paint is used, which is not only amazingly reflective but also can irradiate heat off through the atmosphere and actually achieve below-ambient temperatures at the surface while under direct sunlight!
This product can be used underneath the roof below the shingles prior to shingle installation or sprayed from the attic on the sheathing and rafters. As for larger size soffits, yes that would help, but not nearly like the supertherm. I don't care how big your soffits are, they are not venting a massive shingle area thats 170 degrees.
my white roof is metallic, i am very happy to have done it, although in austria there is no such strong summer, but you have to prepare for the future. thanks for the video. Today I saw a video on Blomberg channel about white roofs in Barcelona, Spain.
Yes, the SUPER THERM has been tested under the CRRC. The initial testing was on Solar only which is the Visual Light or short wave testing and the number was 83%. In the three year retest, the drop in reflectivity was 0.6%. Interestingly, after 10 years, there was no drop in performance as tested by a Japanese architectural firm. Later, the same firm tested a 15 year old roof and found it only lost 8% of the initial reflectivity performance for solar.
@the43k As commenters are trying to point out, the effect is almost entirely due to the reflectivity of the paint, which has nothing to due with the insulative value of that the ceramic material does (or doesn't!) supply. The folks that make this kind of paint do a clever sleight-of-hand trick regarding the "technology" they use. At the thicknesses of paint, only an aerogel would work (tho expensive and damn hard to work with). Good idea, but save the premium cost of this paint for elsewhere.
First of all, you can apply this product after the shingles have been subjected to warm temperatures in order to warm the adhesive. Second, even if you somehow applied the super therm immediately to the shingles, the roof will still warm to about 5 to 15 degrees above ambient temperature, so I suspect this would be warm enough to make them stick.
Great job, man. I'm getting ready to apply a similar product called Maxx-Cool to a mobile home roof; the AC unit can't keep up with the mid-summer heat. I priced roof-overs and a product called Peel & Seal, but elastomerics seem easier to apply and are a lot less expensive than the alternatives. I didn't vote for Obama, but I'm happy to try this idea to help lower bills and extend the life of the AC unit. Thanks for a great video. Didn't realize it was good for shingled roofs too.
This is a great demonstration of the effect of reflecting radiant heat. I love it. Thank you for this great documentation. I hope you find it to be as durable as it is effective. Please update this video if you choose to reapply at some point. Thanks!
@NJRE Thanks for the update. That roof looks to be at least 2:12 pitch, so it's sufficiently sloped for shingles. The issue is that you sealed a shingled roof. You can't just use every product with every building system. As soon as you mentioned sealing the roof, I knew you didn't understand how shingled roofs work. (And I had the same reaction to the painted chimney.) Rule #1 of controlling water on a structure is to give it a path out, at least as vapor and preferably also as liquid. Do not trap water. However, that product is water impermeable and is a vapor retarder (8 perms at its minimum thickness). That means you could reasonably use it as part of a building system with some other mechanism for drainage and ventilation, but you used it in this application to _block_ drainage and ventilation. Unfortunately, you can't rely on manufacturers to provide good advice for integrating products into building systems. You have to understand how the systems work. _Caveat emptor._
You just voided the manufacturer warranty on those shingles. Also this is not made for Shingle roofs. Shingles are meant to let the roof breath. Believe it or not roofs are meant to have air circulation. I suggest you put some more vents because you will have extreme condensation due to high humidity. Also water will find its way threw.
Ironically, this roof no longer exists in this form. It was replaced with a white metal roof to support solar panels. That said, your concern could be a valid one, but the science behind it should not be forgotten. White roofs prevent heat loading and should be used whenever possible.
@@RUclipsisscum You will need to contact your shingle maker, none I know of will maintain the warranty with such a coating and im an installer. This sort of coating is mainly only used for metal roofs, especially those with some age on them. Area also several types of white coatings now
Yes, there is a value but its very limited at best. The benefits of reflecting away heat in the summer out weigh any winter absorbtion benefits. Furthermore, if your home is taking in heat thru the roof and walls, it indicative of problem you have of heat loss when the sun isn't warming it up. Super efficient windows facing south or solar thermal collectors are your best way to get free heat during the winter.
No, not everyone can get used to extreme heat. The elderly (yeah, 60 is getting there) have less capacity to get rid of body heat, they don't sweat as much, and often can't feel that they are getting too hot. We see this every summer when we get old folks in heat stroke because they live in top floors of housing units, and don't turn on their A/C in order to save money.
In 2008 I painted my conventional asphalt shingle pitched roof with elastomeric white roof paint (Home Depot: Henry brand; Lowes: Black Jack brand) using a 9" conventional paint roller on a stick and no primer. (The shingles were several years old in 2008. Don't paint without a primer first on new shingles less than 30 days old.) Am very pleased with the results. It cures leaks even before they start and cost 1/3 to 1/4 as much as a reshingle. Nine years later, it shows very little wear. It's immune from all but the most severe hailstorms, unlike unpainted asphalt shingles. It saves on cooling costs. Don't like white? Paint over the white roof paint with any exterior grade paint, in the same color as your shingles if you want. I painted the drip lip at the edge of the shingles too, with a paint brush, so precipitation touches nothing but roof paint until it hits the ground.
Kevin Pullman I'm thinking of doing something like that..to extend the life of my roof for another season or two...for budget reasons...my question is?.. i live in Utah...and we have four season cycles..that are dynamic..
The weather where you live sounds quite similar to where I live. In the nine years the paint has been on the roof, there has been lots of snow, wind, rain, high altitude intense sun and some hail. The roof shows very little wear and no damage from any of this. It took maybe four coats initially to completely cover the conventional asphalt shingles with no gaps where an uphill shingle lays over a downhill shingle. If you do this, and don't have any ponding areas where water collects after a rain, you should be able to get a lot more than one or two seasons more out of your painted roof. One tip: if you have a gap of less than 1/4" in your roof, paint over it. If the gap is more than 1/4", put aluminum tape over it and paint over the aluminum tape. Another tip: around the perimeter of your conventional asphalt shingle roof is likely to be galvanized nails about ever 1.5 feet or so to hold down the shingles at the edge of the roof. Put a small piece of aluminum tape over each nailhead before you paint. Otherwise, the nailhead may rust after a few years and make a rust stain on the white roof paint. You can instead wait a few years for the rust to appear on the surface of the white roof paint, put the small aluminum tape piece over where the nailhead is and apply a little paint over the aluminum. That's what I did, since I didn't know the rust stain would appear. The roof would have likely been fine without doing this, but I just didn't want to look at the rust while on the roof. The rust is not visible from the ground.
I used the cheapest grade of Home Depot: Henry brand or Lowes: Black Jack brand elastomeric white roof paint. The more expensive grades didn't seem worth the extra money. The more expensive grades have a longer guarantee, but the inexpensive grades last very well (nine years so far with very little wear). The more expensive grades are a slightly brighter, more reflective more insulating white than the less expensive grades. Some labels on the white roof paint caution against using on shingles. Don't believe it. You can safely apply the elastomeric white roof paint directly on the shingles. Just use primer if your shingles are new (less than 30 days old), otherwise the white roof paint will bubble up from interacting with the fresh asphalt in the shingles.
I have hail damage. Contractors to busy and shy of my 12 pitch and low ins settlement. Ins canceled me so never see depreciation on top of it. Half of my 10yr old roof is good anyway. Just have finicky jerk neighbors that might laugh at white roof so will paint to match,,,somewhat. I don't think I need to "seal" the shingle bottoms unless area took a direct hail hit. Should have less worries about what others are saying about moisture problems. My roomy attic has huge gable window vents(my design). I wonder if the problem(paint/seal) roofs have poor tiny venting stuffy crawl spaces in the first place. I love a hack so this paint sounds, um, cool. I am also considering steel on my one layer of shingles since steel is supposed to last longer anyway. I see steel put on over shingles with and without a board separation so will have to research that also. Thanks for your info!!!!
I stated several times that it is the R value equivalent. Regardless, it provides excellent protection against heat infiltration. It is not misleading whatsoever. I think the data shows very convincingly that it is a fantastic product. Do you dispute the temperatures I provided? It also is not venerable to moisture. As everyone knows, once fiberglass gets wet, its about useless. I suggest you start providing facts with your opinions if we want to have a serious discussion.
NJRE, don't pay attention to the negative comments, they never did it like you did. Your info proved it worked extremely well. Can you give us an update after all these years? You mentioned in the video, you used Superbase then Supertherm? There were 2 product to use? Thx
In retrospect I don't think putting a coating on shingles is the greatest idea. I put the roof on myself years earlier and due to the very low pitch, it never should have used asphalt shingles. At some point down the road we started to have water leaks. Was this due to the coating or a poorly chosen roof style? In the end, I replaced it with a metal roof that was white and put the solar back on. The math is the math, having a white roof is a brilliant idea.
Do you have the web page of the product? i've been searching for the product to model a home on a software for my engineering thesis using supertherm and i cant find the tech sheet with the properties of it. i would thank you a lot if you can help me with it. Greetings
Ceiling temp is the biggest issue as it will generate Radiant heat. Its just science, higher level of Radiant heat= more cooling needed. AC Systems cannot overcome excessive heat from the roof/ceiling. The second floor is the same as what he shows here, minus the attic Space. So radiant heat from the ceiling is a big deal on our second floor.
Will it as so stop any roof leaks? It is bad when you have 30 year shingles and it is only ten years old and it leaks. Also I would not mind the savings on electric here Texas.
date: September 2023, where do I buy this? This is a ceramic product? Not silicone, silicone is not approved for asphalt shingles? Elastomerics are a 3-5 yr. product and not approved for asphalt shingles. I can't find the product in big box hardware stores nor at roofing suppliers. Second question: will the insurance companies accept this as a roofing treatment?
@Umaxen Yes, but SPI makes a coating that is better for thermal transfer,rather than supertherm that is combination of reflect-ability and insulative coating.
in the northern states like ny and nj where the winters are very cold wouldnt a black roof be an advantage to absorb heat from the sun and keep the house warm? But then it would be harder to cool over the summer? Its hard to say what would help the most... maybe just a light gray roof for average all year around performance?
With a coating like this on your roof, you're also sealing the roof so that the heat inside during the winter will be more likely to stay there. Most roofs lose a lot of heat during the winters, so you're not gaining much if any heat from having a dark roof during the winters.
If you don't want to put it on your roof don't. But you're wrong. The energy savings in the summer can be massive. It also has insulative properties so it will prevent heat loss in the winter (heat trying to escape out thru roof). Lastly, the sun is at a far lower angle in the winter and out for a shorter period of time. You are not getting significant heat gain thru your roof during winter. Japan has used this produce for decades with millions of hours of data to prove it works.
@John Foley In another reply, he mentioned that by sealing the shingles, it trapped water and did not allow sufficient drainage. I suspect it also did not breathe well (8 perms at minimum thickness). Shingles need to drain and breathe. If the application hadn't blocked off the gaps between and beneath the shingles, it would probably have been alright--i.e., as a coat, not a sealant.
Would this also work as a radiant barrier in the winter? Seems like it would be much more effective to paint the entire house, but obviously cost more and look like an Igloo. This would be a great product to have on the sheathing before roofing and siding is applied.
hello fellow nj neighbor, what was you before and after ac cooling savings and heating savings in winter? or what percentage can the average person save, suppose a 2 story home.
What experience do users of this product have with being sued by their HOAs? Seriously? I think a lighter colored roof (this product, whatever) is a fantastic idea. Basically, a white roof in and of itself, could do nothing but improve head absorbing effects of black tiles. I've never understood the logic of black asphalt tiles on roof, then fighting it with piles and piles of insulation. Why not go white (like this product), still insulate well, and eliminate unnecessary radiant heat? Great!
NJ has more cold months and the dark roof would save u more money in the long run. So what's your point? I only need to run at AC 2.5 months vs running the heating system the rest of the year...
@red Agreed.I would be leery to support any particular party through a business, since you are bound to offend half the population.This project was at my home however and I was trying to support and promote Steven Chu's white roof initiative.It would also be great if Americans could objectively review a president's policy on a case by case basis. Rather then just hating him because foxnews said so. Like the old saying goes, even a broken watch is right twice a day. Not that obama is broken.
if u put pure white marble with length each tile 6 inches by one foot and thickness ten Millies is the best and final salution to protect roof from very high heat I m 100% sure u can protect and reduce heat from 50c to 15c thanks
@exodous02 Scam no, is the cost overinflated? I don't know. But as stated, its not paint, it has 4 different ceramics and is non-toxic. High quality house paint is 50 dollars a gallon. Supertherm is twice the price, don't think that is out of the realm of possibility.
White roofs decrease precipitation by 4% through white roof reflection (i.e. less rain). Nothing beats mother nature green surfaces. She picked green for a reason.
This is awesome; we once had white rock roof it was great at our Condos however we switched to brown shingles and the temperatures when up a lot. Is there any product out there where you could cover your shingles (not solid white but clear) that would reflect heat just as well. It would have to be clear...or any IDEAS that would might help reduce the heat! Yikes, I'm in Arizona and it's really hot!!
I appreciate the complement where applicable, but I will let the data I collected and the certifications below speak for themselves... Super Therm® is UL, FM, DNV, ABS, IMO, USDA, Energy Star, ICC, California Home Furnishings, and U.S. Coast Guard and CRRC approved to meet criteria. This product has also been applied to over 70,000,000 sq/ft of roofing in japan and all of the 70 million sq ft has been field tested and data logged. I can and will provide anyone who requests to see all data.
the43k Our rubber roof is overdue for it's normal re-coating. We've just been waiting for the weather to cooperate so we can get it done. Please tell me where I can find instructions for using THIS product instead of the coating we are used to using.
hope you don't hate me for my comment: 1: Roof coating ARE NOT made to be applied over asphalt shingles I came across 2 homeowners that roof coated their shingle roof and the water got trapped under the shingles, damaged the nails and caused leaks. I don't know who told you to apply roof coating over shingles but you are wrong, I'm a pro roofer and I would never do that , learn the basics and then go out there and start doing roofing .
I have read a bunch about this and it is actually fine on asphalt shingles. The directions say to pressure wash it make sure it is DRY and to apply it during the DRY season of your location. Other than that a COMPLETELY covered coat getting in all the nooks and crannies should seal the roof into a waterproof barrier. Do you know if your homeowner friend followed all of these steps? Did you know as a pro roofer that roofs with no coating on them are exposed to water and the nails can rust and the roofs can leak? Maybe you should learn the basics before commenting.
He's in New Jersey. We're in the Sonoran desert, hotter than Death Valley for a few days last summer. The house here is 48 years old, ranch style, stick frame, 4/12 slope truss roof with faux (composite) Spanish tiles. I'm removing the tiles, checking the sheathing and other parts, covering with a roll roofing product (felt paper 70lb) and then covering with a manufactured Radiant Barrier, which is like reinforced aluminum foil in a 4' wide roll. One, $150 roll covers 1000 ft2. Because a radiant barrier must have one side open to the air, I'm covering it with corrugated metal roofing panels. Cheap and perfect because they are also a radiant barrier, but not as reflective. Simple and effective and mostly common sense which is why the concept has the City building department calling for multiple permits and other ridiculous answers to questions that need not be asked, out of ignorance and the bureaucrats instinct for self-preservation. A 5kw Solar PV goes on top, so we don't want to ever set foot up there again for at least 20 years. Easy and fast if City Hall will step back. Almost impossible or far more expensive if they don't. I'm a licensed general contractor and the home owner. To do this under my business name so I don't have to pay someone else to do it, I am a Self Generating Investment Program contractor on Edisons list. My business name, lisatec, has to be checked against a registry of names, to get a $30 Certificate of Authenticity. Then that name needs a "place of occupation" not a PO box so another permit for a "Certificate of Occupation for a registered name" is needed, which is my house. Then a permit to replace the whole roof, even though I'm working on less than 30% of it, and then a permit for a solar PV system, but with a battery backup, which requires another inspection certificate from Edison, because of the battery. My wife is American, I'm a Canadian Permanent Resident. I'm supposed to be the socialist. There are so many people in California who receive paychecks from government, I'm surprised there is anyone left to do the work.
It reflects 99% UV, 99% IR, and 92% of visible light resulting in 95% combined energy block. At that point it really doesn't even matter how much it retards heat. The R value cannot be tested via the conventional testing method because the paint is so thin compared to other insulation materials, but it does get the equivalent of R-19, via multiple other tests.
This can be achieved using a powered attic exaust fan either solar to replace your roof vents or it can be thermostat controlled with far more dramatic results and without the use of a clearly unsightly product that I guarantee will not hold up over time as well as the contributing pollution and chemicals used in its manuacture. Your attic is a good candidate, simply ensure that the attic insulation is cleared from the sophit areas, the sofit has enough vents in it and power vent the roof.
FYI..I don't sell or work for Supertherm. Here is 1/8 of the data they provide on their site. Mitsubishi Material- 26 degrees C (47 degrees F) reduction in roof surface temperature Panasonic - Matsushita Electric- 24 degrees C (43 degrees F) reduction in surface temperature Architectural review on 10-year aged roof and found no loss of reflectivity 15-year test of roof and found it was still 76% of reflectivity when new
A link to my website if above, if you're interested, I can forward your contact or connect the two of you together. BTW, not that it matters, but its not paint. Its a ceramic coating. Not trying to be a wise ass, just understand, your buying a high quality product, not white paint from Homedepot.
I went to your site and then click on "where to buy" it said I could purchase it at Home Depot but the Home Depot site says it has been discontinued. Just wondering why? And if there is somewhere else I can purchase it. Thank you
@the43k Wow, that's pretty expensive. My roof's 20 yrs old and was hoping to prolong its life with this system. The website says you need to put down a special base coat, 2 layers of super therm and a protective coat on top. Did you use these other coats? And if so, how much did they cost? Thanks
How about just wrapping some off black layer of elastic UY and water resistant film or canvas, roll by roll, to cover the majority of the roof, ... so that you can unwrap them the next Summer?
4. Energy Star Program Approved Partner/ Approved Product a. Only 0.6% drop in reflectivity over a 3 year roof test period (2% over 10 years). 5. ICC (International Code Council) BOCA Legacy Report. 6. USDA (United States Dept. of Agriculture) a. USDA approved product for use inside food facilities.
@the43k yeah..sorry for being nitpicky! But tell me..what have you found out about this stuff? I'm considering buying a 40' container and turning it into a house. I wonder if a coating of this would help, inside and out, instead of using inches of foam..
this stuff looks awesome - my roof is already white - may try it on the back of the house facing SW Front will have 10-14 solar panels soon - where do I get this stuff- ALSO GREAT VIDEOS on the Solar installs and Microinverters very detailed
Even though I am not sure our HOA would react to a white roof, if the only goal of this is to lower the attic temperatures, then getting 2 - 3 solar powered vents on the roof might get the job done too. Except the decent ones cost around $500 and that doesn't include installation.
Has anyone thought about painting their house with this? My house is ready for a new paint job, I live in AZ, thinking of painting my house with this. Wonder if it will have an effect.
Awesome vid. Great idea to take temp samples all over and inside. I would request a matrix of each data point. 76 degree 80 degree shingle temp 170 degree 101 degree etc...
I would contact supplier for exact figures.... It will vary with application, 1 gallon does about 100 Sq feet. Gallon price is about 90 to 100 dollars. Per gallon price will be better with larger quantity. Again, many variables, I would speak to supplier.
I would love to see an update on how well, or not, it has performed over the years.
We’re there issues?
Did you need to reapply?
Did it damage anything?
Did snow age it?
Did it perform as advertised, or better?
This is indeed a great solution to saving electric in the summers. The problem is that in many many suburbs, the home owners associations have very strict bylaws/guidelines on what you can do to your roof for not only the color, but the materials as well... Until those rules are changed, you will spend more than the cost of your house trying to fight their lawsuits from them trying to make you replace the roof to within their guidelines. You can also get the ceramic paint additive to paint the exterior walls if you have a west facing "hot wall". Painting the west wall alone resulted in almost a 15 degree change of that one rooms sidewall.
I painted my roof last week with hydrated lime mixed with water. a 50 pound bag costs about 7 dollars.(available hardw.store). I bought 2 bags to cover my 1000 square foot house plus carport. my attic temperatures went down from about 140 degrees down to below 100 degrees. my house stays below 82 degrees all day and all night long now. I think what i used might wash off after a summer or 2... but it only costed me less than 15 bucks!!! My house used to be 10 degrees hotter (with AC off)
how long did it last??
Still working out?
Excellent video, and very valuable even after 8 years. Thank you.
I installed a white roof last year and we could immediately feel the effects both in temperature and in lower power bills...this is NOT B.S.
Exactly. Did the same thing and had the same results.
@@Nightbird. do it get dirty..........when it does than what about the cooling effect....
@@samrajahangir4635 Yes they get dirty after a few years..and then you have to hire someone to clean it. But even under the dirt they still provide a cooling effect.
any white roof ?
@@ayc868 it got dirty after just 2 weeks
wastage of time and money
false ceiling is best optioj
This product has thermal properties, so its not bad in the winter. It will resist heat leaving thru the roof. Winter BTU's into house are limited anyway. Regardless, your savings is so great during the summer it would out weigh the loss in the winter.. But there isn't any.
The ceramic make up of SUPER THERM is not dependent on reflectivity alone. The ceramic blend does not absorb heat which is the main purpose of the coating. Reflecting heat off the surface is important, but more important is the ability of the coating to resist the loading of heat to block the heat load to the surface or envelope of the building. If one blocks initial "heat load", the true insulation effect has been met.
If anyone here doesn't get it or doubts it... return to Pre K, light color cool dark color warm in summer....
I used Henry Solar Flex 287. Cost was $340, annual electric savings since was $420 per year. I also extened the life of my worn shingles and the AC as it comes on less frequently. ROI 0.76 even the dumbest venture capitalist should get that one.
Hey how is your roof holding up after 6 years?? Can a thick coat of this stuff prevent leaks??
What if you have a few small leaks in your existing roof? Will this fix them? We sometimes get water during prolonged gully washers
this sound perfect for the summer time. now my question is how is it on the winter time when the tempetures are bellow 0 degrees? does it absorb heat to help reduce the use of the furnace or will the house be colder than usual?
During the summer, You should paint the roof white during the day to reflect the heat, and paint the roof black during the night to radiate the heat back to space.
During the winter, you should paint the roof black during the day to absorb the heat, and paint the roof white during the night so the roof does not radiate the heat back to space.
For one, the angle of the sun in the winter is far lower and the amount of heat gain is greatly reduced. 2nd this is not paint, it's a insulative coating. It will keep the heat inside the house from escaping thru the roof.
How is the painted roof holding up?
I need a response
Yes, this coating, made for this type of application has ceramics that are "designed" for lack of a better word for mostly reflective purposes. However, I've also used their HSC (hot surface coating) against the sheathing between studs. This product uses different ceramics to prevent heat absorption. For instance, I hit it with a torch for over 20 seconds and could immediately touch it with my hand. I don't work SPI coatings, but i suggest going on their website and reading about it.
It cooled off fast but I will bet it reflected that heat back into the attic and took longer to cool.
What web site?
Thanks for this excellent video!! One thing though, for very steep roofs, bright reflectance could be an issue (I mean visual comfort), BUT, for flat roofs and low steep roofs, it's the best solution ever.
Some people paint the sheathing as a radiant barrier, then install shingles on top. Probably less effective, but would have a normal look. Solar panels can also be obnoxious for the same reason.
I think it's great. This and green roofs would help lower the ambient temperature in cities too. NYC can get miserably hot in summer with all the concrete and tar roofs soaking up heat.
This idea gets even better now when a passive irradiative cooling type of paint is used, which is not only amazingly reflective but also can irradiate heat off through the atmosphere and actually achieve below-ambient temperatures at the surface while under direct sunlight!
This product can be used underneath the roof below the shingles prior to shingle installation or sprayed from the attic on the sheathing and rafters. As for larger size soffits, yes that would help, but not nearly like the supertherm. I don't care how big your soffits are, they are not venting a massive shingle area thats 170 degrees.
my white roof is metallic, i am very happy to have done it, although in austria there is no such strong summer, but you have to prepare for the future. thanks for the video. Today I saw a video on Blomberg channel about white roofs in Barcelona, Spain.
Yes, the SUPER THERM has been tested under the CRRC. The initial testing was on Solar only which is the Visual Light or short wave testing and the number was 83%. In the three year retest, the drop in reflectivity was 0.6%.
Interestingly, after 10 years, there was no drop in performance as tested by a Japanese architectural firm. Later, the same firm tested a 15 year old roof and found it only lost 8% of the initial reflectivity performance for solar.
Thanks for a great video NJRE? where do you buy Super Therm? I searched everywhere online but can't find it
So how is it holding up... Does it get dirty quick
@the43k As commenters are trying to point out, the effect is almost entirely due to the reflectivity of the paint, which has nothing to due with the insulative value of that the ceramic material does (or doesn't!) supply. The folks that make this kind of paint do a clever sleight-of-hand trick regarding the "technology" they use. At the thicknesses of paint, only an aerogel would work (tho expensive and damn hard to work with). Good idea, but save the premium cost of this paint for elsewhere.
First of all, you can apply this product after the shingles have been subjected to warm temperatures in order to warm the adhesive. Second, even if you somehow applied the super therm immediately to the shingles, the roof will still warm to about 5 to 15 degrees above ambient temperature, so I suspect this would be warm enough to make them stick.
Great job, man. I'm getting ready to apply a similar product called Maxx-Cool to a mobile home roof; the AC unit can't keep up with the mid-summer heat. I priced roof-overs and a product called Peel & Seal, but elastomerics seem easier to apply and are a lot less expensive than the alternatives. I didn't vote for Obama, but I'm happy to try this idea to help lower bills and extend the life of the AC unit. Thanks for a great video. Didn't realize it was good for shingled roofs too.
I used the Henry 287 White Roof Coating for my metal roof from Home-depot.
Does that work about as good?
This is a great demonstration of the effect of reflecting radiant heat. I love it. Thank you for this great documentation. I hope you find it to be as durable as it is effective. Please update this video if you choose to reapply at some point. Thanks!
If it is reflected, then where does it go?
Yes, agreed. I conceded that point 8 months ago below. I hope you got more out of this video than just spending the time to point this out.
So 11 years later how about an update? How long did it last?
Great idea. Wouldn’t use it on asphalt shingles. Especially low angle
@@NJRenewableEnergy So it didn't work? Did it peel or flake off?
@@joshblick roof was too flat for shingles to begin with. Held water under shingles. Leaked over time
@@NJRenewableEnergy That stuff is made for "almost flat" roofs so it sounds like it wasn't put on thoroughly.
@NJRE Thanks for the update.
That roof looks to be at least 2:12 pitch, so it's sufficiently sloped for shingles. The issue is that you sealed a shingled roof. You can't just use every product with every building system.
As soon as you mentioned sealing the roof, I knew you didn't understand how shingled roofs work. (And I had the same reaction to the painted chimney.)
Rule #1 of controlling water on a structure is to give it a path out, at least as vapor and preferably also as liquid. Do not trap water.
However, that product is water impermeable and is a vapor retarder (8 perms at its minimum thickness). That means you could reasonably use it as part of a building system with some other mechanism for drainage and ventilation, but you used it in this application to _block_ drainage and ventilation.
Unfortunately, you can't rely on manufacturers to provide good advice for integrating products into building systems. You have to understand how the systems work. _Caveat emptor._
It's been 14 years, how did it hold up? If there a follow up video?
Was wondering if this can be on shingles asphalt roof...Should hire a roofing contractor or a painter?
since the beginning of man there have been haters in this world so sad great video very educational
No matter what you do in life, someone will always try to debunk anything new. I plan on doing this to my roof next spring.
And since the beginning of man there have been idiots who will obediently do what others will tell them without first checking the facts.
can I use this paint on my exterior concrete block home in florida, the radiation of this heated walls to the inside of the house is incredible
They probably have a concrete specific product. Ceramic paint can be applied to just about anything.
You just voided the manufacturer warranty on those shingles. Also this is not made for Shingle roofs. Shingles are meant to let the roof breath. Believe it or not roofs are meant to have air circulation. I suggest you put some more vents because you will have extreme condensation due to high humidity. Also water will find its way threw.
Ironically, this roof no longer exists in this form. It was replaced with a white metal roof to support solar panels. That said, your concern could be a valid one, but the science behind it should not be forgotten. White roofs prevent heat loading and should be used whenever possible.
If water will find it's way through, so will water vapor and air.
The product I've been reading on says it does not void warranty and allows air to vent through shingles
@@RUclipsisscum You will need to contact your shingle maker, none I know of will maintain the warranty with such a coating and im an installer. This sort of coating is mainly only used for metal roofs, especially those with some age on them. Area also several types of white coatings now
I thought painting the roof causes moisture under the rafters and causes mold.
Is there any value to that heat in the winter , that you are now reflecting?
Yes, there is a value but its very limited at best. The benefits of reflecting away heat in the summer out weigh any winter absorbtion benefits. Furthermore, if your home is taking in heat thru the roof and walls, it indicative of problem you have of heat loss when the sun isn't warming it up. Super efficient windows facing south or solar thermal collectors are your best way to get free heat during the winter.
+msa1985 everyone gets used to the heat. it's when you go from one extreme to the next without letting your body climatize.
No, not everyone can get used to extreme heat. The elderly (yeah, 60 is getting there) have less capacity to get rid of body heat, they don't sweat as much, and often can't feel that they are getting too hot. We see this every summer when we get old folks in heat stroke because they live in top floors of housing units, and don't turn on their A/C in order to save money.
is attic temp a big concern if your ceiling is properly insulated, such as with closed cell spray foam?
It’s been 15 years I would like an update on the roof.
In 2008 I painted my conventional asphalt shingle pitched roof with elastomeric white roof paint (Home Depot: Henry brand; Lowes: Black Jack brand) using a 9" conventional paint roller on a stick and no primer. (The shingles were several years old in 2008. Don't paint without a primer first on new shingles less than 30 days old.) Am very pleased with the results. It cures leaks even before they start and cost 1/3 to 1/4 as much as a reshingle. Nine years later, it shows very little wear. It's immune from all but the most severe hailstorms, unlike unpainted asphalt shingles. It saves on cooling costs. Don't like white? Paint over the white roof paint with any exterior grade paint, in the same color as your shingles if you want. I painted the drip lip at the edge of the shingles too, with a paint brush, so precipitation touches nothing but roof paint until it hits the ground.
Kevin Pullman I'm thinking of doing something like that..to extend the life of my roof for another season or two...for budget reasons...my question is?.. i live in Utah...and we have four season cycles..that are dynamic..
The weather where you live sounds quite similar to where I live. In the nine years the paint has been on the roof, there has been lots of snow, wind, rain, high altitude intense sun and some hail. The roof shows very little wear and no damage from any of this. It took maybe four coats initially to completely cover the conventional asphalt shingles with no gaps where an uphill shingle lays over a downhill shingle. If you do this, and don't have any ponding areas where water collects after a rain, you should be able to get a lot more than one or two seasons more out of your painted roof. One tip: if you have a gap of less than 1/4" in your roof, paint over it. If the gap is more than 1/4", put aluminum tape over it and paint over the aluminum tape. Another tip: around the perimeter of your conventional asphalt shingle roof is likely to be galvanized nails about ever 1.5 feet or so to hold down the shingles at the edge of the roof. Put a small piece of aluminum tape over each nailhead before you paint. Otherwise, the nailhead may rust after a few years and make a rust stain on the white roof paint. You can instead wait a few years for the rust to appear on the surface of the white roof paint, put the small aluminum tape piece over where the nailhead is and apply a little paint over the aluminum. That's what I did, since I didn't know the rust stain would appear. The roof would have likely been fine without doing this, but I just didn't want to look at the rust while on the roof. The rust is not visible from the ground.
I used the cheapest grade of Home Depot: Henry brand or Lowes: Black Jack brand elastomeric white roof paint. The more expensive grades didn't seem worth the extra money. The more expensive grades have a longer guarantee, but the inexpensive grades last very well (nine years so far with very little wear). The more expensive grades are a slightly brighter, more reflective more insulating white than the less expensive grades. Some labels on the white roof paint caution against using on shingles. Don't believe it. You can safely apply the elastomeric white roof paint directly on the shingles. Just use primer if your shingles are new (less than 30 days old), otherwise the white roof paint will bubble up from interacting with the fresh asphalt in the shingles.
I have hail damage. Contractors to busy and shy of my 12 pitch and low ins settlement. Ins canceled me so never see depreciation on top of it. Half of my 10yr old roof is good anyway. Just have finicky jerk neighbors that might laugh at white roof so will paint to match,,,somewhat. I don't think I need to "seal" the shingle bottoms unless area took a direct hail hit. Should have less worries about what others are saying about moisture problems. My roomy attic has huge gable window vents(my design). I wonder if the problem(paint/seal) roofs have poor tiny venting stuffy crawl spaces in the first place. I love a hack so this paint sounds, um, cool. I am also considering steel on my one layer of shingles since steel is supposed to last longer anyway. I see steel put on over shingles with and without a board separation so will have to research that also. Thanks for your info!!!!
I stated several times that it is the R value equivalent. Regardless, it provides excellent protection against heat infiltration. It is not misleading whatsoever. I think the data shows very convincingly that it is a fantastic product. Do you dispute the temperatures I provided? It also is not venerable to moisture. As everyone knows, once fiberglass gets wet, its about useless. I suggest you start providing facts with your opinions if we want to have a serious discussion.
NJRE, don't pay attention to the negative comments, they never did it like you did. Your info proved it worked extremely well. Can you give us an update after all these years? You mentioned in the video, you used Superbase then Supertherm? There were 2 product to use? Thx
In retrospect I don't think putting a coating on shingles is the greatest idea. I put the roof on myself years earlier and due to the very low pitch, it never should have used asphalt shingles. At some point down the road we started to have water leaks. Was this due to the coating or a poorly chosen roof style? In the end, I replaced it with a metal roof that was white and put the solar back on. The math is the math, having a white roof is a brilliant idea.
Do you have the web page of the product? i've been searching for the product to model a home on a software for my engineering thesis using supertherm and i cant find the tech sheet with the properties of it. i would thank you a lot if you can help me with it.
Greetings
It would be nice if you showed the temperature in the room before and after instead of the ceiling temp
Ceiling temp is the biggest issue as it will generate Radiant heat. Its just science, higher level of Radiant heat= more cooling needed. AC Systems cannot overcome excessive heat from the roof/ceiling.
The second floor is the same as what he shows here, minus the attic Space. So radiant heat from the ceiling is a big deal on our second floor.
Awesome! Awesome! Awesome video! Thanks for this.
Will it as so stop any roof leaks? It is bad when you have 30 year shingles and it is only ten years old and it leaks. Also I would not mind the savings on electric here Texas.
date: September 2023, where do I buy this? This is a ceramic product? Not silicone, silicone is not approved for asphalt shingles? Elastomerics are a 3-5 yr. product and not approved for asphalt shingles. I can't find the product in big box hardware stores nor at roofing suppliers. Second question: will the insurance companies accept this as a roofing treatment?
@Umaxen Yes, but SPI makes a coating that is better for thermal transfer,rather than supertherm that is combination of reflect-ability and insulative coating.
Did you end up doing the rest of the roof or just rolling it on the spaces that needed it the most?
How is the Super Therm holding up in 2022?
the roof will reflect light in the winter when you want a warm roof. What do you think?
Great job guys! I install this stuff in florida where its 95 + in the summer!!!
in the northern states like ny and nj where the winters are very cold wouldnt a black roof be an advantage to absorb heat from the sun and keep the house warm? But then it would be harder to cool over the summer? Its hard to say what would help the most...
maybe just a light gray roof for average all year around performance?
With a coating like this on your roof, you're also sealing the roof so that the heat inside during the winter will be more likely to stay there. Most roofs lose a lot of heat during the winters, so you're not gaining much if any heat from having a dark roof during the winters.
If you don't want to put it on your roof don't. But you're wrong. The energy savings in the summer can be massive. It also has insulative properties so it will prevent heat loss in the winter (heat trying to escape out thru roof). Lastly, the sun is at a far lower angle in the winter and out for a shorter period of time. You are not getting significant heat gain thru your roof during winter. Japan has used this produce for decades with millions of hours of data to prove it works.
Water based? How many rain seasons can it handle?
0. it's never too be used on shingles. it will either trap water or wash off
How long does it last before you have to redo it?
Great product for great applications, I wouldn’t put this on asphalt shingles ever again
@@NJRenewableEnergy Was this a misspeak? You "wouldn't put on asphalt shingles again" or you don't need to put it on again?
@John Foley In another reply, he mentioned that by sealing the shingles, it trapped water and did not allow sufficient drainage. I suspect it also did not breathe well (8 perms at minimum thickness). Shingles need to drain and breathe. If the application hadn't blocked off the gaps between and beneath the shingles, it would probably have been alright--i.e., as a coat, not a sealant.
and how much was it?
im looking for a concrete coating that i can use between my cinderblock walls and the stone facade. my house is all concrete.
Would this also work as a radiant barrier in the winter? Seems like it would be much more effective to paint the entire house, but obviously cost more and look like an Igloo. This would be a great product to have on the sheathing before roofing and siding is applied.
hello fellow nj neighbor, what was you before and after ac cooling savings and heating savings in winter? or what percentage can the average person save, suppose a 2 story home.
Great!!!! Thank you for shearing !
Great video ,i'm from Brazil and i Will make this in my house
What experience do users of this product have with being sued by their HOAs? Seriously? I think a lighter colored roof (this product, whatever) is a fantastic idea. Basically, a white roof in and of itself, could do nothing but improve head absorbing effects of black tiles. I've never understood the logic of black asphalt tiles on roof, then fighting it with piles and piles of insulation. Why not go white (like this product), still insulate well, and eliminate unnecessary radiant heat? Great!
ò
I can see this being used is some applications but I don’t get why over composition roofing. Does this void the warranty of the composition roofing?
NJ has more cold months and the dark roof would save u more money in the long run. So what's your point?
I only need to run at AC 2.5 months vs running the heating system the rest of the year...
what's the brand of the product you used?
Sir we can use any white paint because in our country this paint not available.
Wouldn't the positive effects be negated by the roof being cooler in the winter, requiring more heat to run in the house?
@red Agreed.I would be leery to support any particular party through a business, since you are bound to offend half the population.This project was at my home however and I was trying to support and promote Steven Chu's white roof initiative.It would also be great if Americans could objectively review a president's policy on a case by case basis. Rather then just hating him because foxnews said so. Like the old saying goes, even a broken watch is right twice a day. Not that obama is broken.
if u put pure white marble with length each tile 6 inches by one foot and thickness ten Millies is the best and final salution to protect roof from very high heat I m 100% sure u can protect and reduce heat from 50c to 15c thanks
(NRCA) National Roofing Contractors Association does not recommend any type of protective coating be applied to shingle roof.
I love the idea of painting my roof white to lower the heat in the house. Where can I actually buy this paint? Thanks!
@exodous02 Scam no, is the cost overinflated? I don't know. But as stated, its not paint, it has 4 different ceramics and is non-toxic. High quality house paint is 50 dollars a gallon. Supertherm is twice the price, don't think that is out of the realm of possibility.
How much does the stuff cost to coat a roof?
Looks interesting. Of course one question is the cost. Wish you would have addressed the cost aspect.
White roofs decrease precipitation by 4% through white roof reflection (i.e. less rain). Nothing beats mother nature green surfaces. She picked green for a reason.
This is awesome; we once had white rock roof it was great at our Condos however we switched to brown shingles and the temperatures when up a lot. Is there any product out there where you could cover your shingles (not solid white but clear) that would reflect heat just as well. It would have to be clear...or any IDEAS that would might help reduce the heat! Yikes, I'm in Arizona and it's really hot!!
Thanks for the video. It was very informative. Where can I buy this product?
I appreciate the complement where applicable, but I will let the data I collected and the certifications below speak for themselves... Super Therm® is UL, FM, DNV, ABS, IMO, USDA, Energy Star, ICC, California Home Furnishings, and U.S. Coast Guard and CRRC approved to meet criteria. This product has also been applied to over 70,000,000 sq/ft of roofing in japan and all of the 70 million sq ft has been field tested and data logged. I can and will provide anyone who requests to see all data.
I want to know if this coating can be applied to a rubber roof.
yes
the43k Our rubber roof is overdue for it's normal re-coating. We've just been waiting for the weather to cooperate so we can get it done. Please tell me where I can find instructions for using THIS product instead of the coating we are used to using.
go to my business website and contact me through email. thx
+Linda Dalton
These product is on Home Depot , you can ask there .
hope you don't hate me for my comment:
1: Roof coating ARE NOT made to be applied over asphalt shingles
I came across 2 homeowners that roof coated their shingle roof and the water got trapped under the shingles, damaged the nails and caused leaks.
I don't know who told you to apply roof coating over shingles but you are wrong, I'm a pro roofer and I would never do that , learn the basics and then go out there and start doing roofing .
Roofing Solutions By Eric Garcia this is a very contradictory statement to the main narration.
Roofing Solutions By Eric Garcia
If this paint is true,
You need to open a painting company my friend.
I have read a bunch about this and it is actually fine on asphalt shingles. The directions say to pressure wash it make sure it is DRY and to apply it during the DRY season of your location. Other than that a COMPLETELY covered coat getting in all the nooks and crannies should seal the roof into a waterproof barrier. Do you know if your homeowner friend followed all of these steps? Did you know as a pro roofer that roofs with no coating on them are exposed to water and the nails can rust and the roofs can leak? Maybe you should learn the basics before commenting.
He's in New Jersey. We're in the Sonoran desert, hotter than Death Valley for a few days last summer. The house here is 48 years old, ranch style, stick frame, 4/12 slope truss roof with faux (composite) Spanish tiles.
I'm removing the tiles, checking the sheathing and other parts, covering with a roll roofing product (felt paper 70lb) and then covering with a manufactured Radiant Barrier, which is like reinforced aluminum foil in a 4' wide roll. One, $150 roll covers 1000 ft2. Because a radiant barrier must have one side open to the air, I'm covering it with corrugated metal roofing panels. Cheap and perfect because they are also a radiant barrier, but not as reflective. Simple and effective and mostly common sense which is why the concept has the City building department calling for multiple permits and other ridiculous answers to questions that need not be asked, out of ignorance and the bureaucrats instinct for self-preservation.
A 5kw Solar PV goes on top, so we don't want to ever set foot up there again for at least 20 years. Easy and fast if City Hall will step back. Almost impossible or far more expensive if they don't. I'm a licensed general contractor and the home owner. To do this under my business name so I don't have to pay someone else to do it, I am a Self Generating Investment Program contractor on Edisons list. My business name, lisatec, has to be checked against a registry of names, to get a $30 Certificate of Authenticity. Then that name needs a "place of occupation" not a PO box so another permit for a "Certificate of Occupation for a registered name" is needed, which is my house. Then a permit to replace the whole roof, even though I'm working on less than 30% of it, and then a permit for a solar PV system, but with a battery backup, which requires another inspection certificate from Edison, because of the battery.
My wife is American, I'm a Canadian Permanent Resident. I'm supposed to be the socialist. There are so many people in California who receive paychecks from government, I'm surprised there is anyone left to do the work.
Roofing Solutions for any roof conditions i
where did you got it and how was it? Good job
Thank you
It reflects 99% UV, 99% IR, and 92% of visible light resulting in 95% combined energy block. At that point it really doesn't even matter how much it retards heat. The R value cannot be tested via the conventional testing method because the paint is so thin compared to other insulation materials, but it does get the equivalent of R-19, via multiple other tests.
This can be achieved using a powered attic exaust fan either solar to replace your roof vents or it can be thermostat controlled with far more dramatic results and without the use of a clearly unsightly product that I guarantee will not hold up over time as well as the contributing pollution and chemicals used in its manuacture. Your attic is a good candidate, simply ensure that the attic insulation is cleared from the sophit areas, the sofit has enough vents in it and power vent the roof.
any updates would be greatly appreciated ......nine years later
Raymond Baumann c he's probably homeless or dead since our genius presidents bugs were released.
FYI..I don't sell or work for Supertherm. Here is 1/8 of the data they provide on their site.
Mitsubishi Material- 26 degrees C (47 degrees F) reduction in roof surface temperature
Panasonic - Matsushita Electric- 24 degrees C (43 degrees F) reduction in surface temperature
Architectural review on 10-year aged roof and found no loss of reflectivity
15-year test of roof and found it was still 76% of reflectivity when new
Yes, this is a good thing you are doing, I am very interested in it. Have you installed the solar arrays.
A link to my website if above, if you're interested, I can forward your contact or connect the two of you together. BTW, not that it matters, but its not paint. Its a ceramic coating. Not trying to be a wise ass, just understand, your buying a high quality product, not white paint from Homedepot.
I went to your site and then click on "where to buy" it said I could purchase it at Home Depot but the Home Depot site says it has been discontinued. Just wondering why? And if there is somewhere else I can purchase it. Thank you
www.omnifloorings.com
Effie Deshazier probably because they recommend putting it over shingles.
Effie Deshazier probably because they recommend putting it over shingles.
Not to be used on Shingles.
Why not
@the43k Wow, that's pretty expensive. My roof's 20 yrs old and was hoping to prolong its life with this system. The website says you need to put down a special base coat, 2 layers of super therm and a protective coat on top. Did you use these other coats? And if so, how much did they cost?
Thanks
How about just wrapping some off black layer of elastic UY and water resistant film or canvas, roll by roll, to cover the majority of the roof, ... so that you can unwrap them the next Summer?
White for Summer reflecting the sun thermal and
black for Winter absorbing the sun thermal.
So your saying this also helps with the winter heating bill. Thats interesting. I wouldn't expect that.
I wonder how hot it gets when it’s like 110 degrees outside must be a furnace
Rule number 1 of marketing, NEVER mix politics and business together.
Where was the politics?
Arthur Huizar When he brought Obama into it.
@@donttrip775 He brought President Obama into it because it was President Obama's administration idea. Credit given where credit is due.
Nightbird oh bullcrap
@@donttrip775 Look it up..it's documented. Or..just keep hating the black guy as usual..it's what you people do best..lol.
4. Energy Star Program Approved Partner/ Approved Product
a. Only 0.6% drop in reflectivity over a 3 year roof test period (2% over 10 years).
5. ICC (International Code Council) BOCA Legacy Report.
6. USDA (United States Dept. of Agriculture)
a. USDA approved product for use inside food facilities.
@the43k yeah..sorry for being nitpicky! But tell me..what have you found out about this stuff? I'm considering buying a 40' container and turning it into a house. I wonder if a coating of this would help, inside and out, instead of using inches of foam..
this stuff looks awesome - my roof is already white - may try it on the back of the house facing SW
Front will have 10-14 solar panels soon - where do I get this stuff-
ALSO GREAT VIDEOS on the Solar installs and Microinverters very detailed
Even though I am not sure our HOA would react to a white roof, if the only goal of this is to lower the attic temperatures, then getting 2 - 3 solar powered vents on the roof might get the job done too. Except the decent ones cost around $500 and that doesn't include installation.
Has anyone thought about painting their house with this? My house is ready for a new paint job, I live in AZ, thinking of painting my house with this. Wonder if it will have an effect.
can you spray it on?
yes
'Catastrophic change' at 8:20? maybe the word 'radical' or 'tremendous' is better. Thanks for the video info.
Awesome vid. Great idea to take temp samples all over and inside. I would request a matrix of each data point.
76 degree 80 degree
shingle temp 170 degree 101 degree
etc...
I would contact supplier for exact figures....
It will vary with application, 1 gallon does about 100 Sq feet. Gallon price is about 90 to 100 dollars. Per gallon price will be better with larger quantity. Again, many variables, I would speak to supplier.
At this "cheap" price for this magic "ceramic" paint, there is no wonder why you'd have a dog in this fight!