A Walnut And Cherry Vase Made With Rings Cut On A Scroll Saw

Blade and drill bit info links
www.bearwood.c...
www.bearwood.c...
mikesworkshop....
Extended length drill bits
www.mcmaster.c...
Here are links to the book and the tools that I have purchased.
Link to book:
amzn.to/48D0NxB
Flex pad sander and discs:
amzn.to/3S7sadV
Sanding sleeves for inflatable sander:
amzn.to/4aLRsFo
Inflatable sander:
amzn.to/3S3FmQT
Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
amzn.to/3LVcYNl
30 60 90 ruler
amzn.to/46JFyct
45 45 90 ruler
amzn.to/3PStOxq
swivel hooks
amzn.to/3Qduf77
amzn.to/3FRIAQE
Some of my favorite pattern books
classic fretwork patterns
amzn.to/3PT7fsJ
custom boxes
amzn.to/3ROJt3B
gear clocks
amzn.to/45rXxDl
gizmos and gadgets
amzn.to/3FnoBJ5
scroll saw box patterns
amzn.to/44sYQTt
more box projects
amzn.to/3WARb3E
Another vase from Carole Rothman's book of bowl making. This one she intended to be more advanced and finished inside and out by building it in sections. I managed to sand all of the inside except for the very bottom. For that she used a flexible shaft sander that I do not have. Mine is a dremel flexible shaft and cannot handle the inflatable ball sanders. That is something that I will have to remedy in the near future. I did not put any finish on the inside on this one but may revisit this project with a darker center ring and a better sanding system. I used cherry where she used redheart for the center ring. The cherry does not give the contrast that I wanted with the veneer rings above and below it. I like this one as it finished but would like to improve on it at a later date.
stand
amzn.to/3Vd3hPs
amzn.to/4avZYHj
amzn.to/4auu0LG

[@ronrowen8241]

Fantastic looking vase, great job thank you

[@twinoakstreasures9032]

Thank you

[@IOSARBX]

Twin Oaks Treasures, Youre gonna be famous!

[@twinoakstreasures9032]

If a little fortune comes with the fame that would be great. Thank you

[@bigsparky65]

Beautiful vase, nice choice of wood

[@twinoakstreasures9032]

Thank you

[@fiftysomething7199]

I don’t think I have the patience for all of that sanding. Looks great!

[@twinoakstreasures9032]

Sanding has always been my woodworking weakness. These projects require a lot of sanding and shaping, I have had to suck it up and get better at it so maybe it makes me a better overall woodworker.

[@davenewkirk1642]

Great looking vase

[@twinoakstreasures9032]

Thank you

[@stevebrown2079]

Great work
Thanks for sharing. 👍

[@twinoakstreasures9032]

Thank you

[@rogercourtney8376]

Great job going try that someday

[@twinoakstreasures9032]

Thank you