I mean they did prove some of the issues that the m51 had with the m53. Other than the strap system not changing. It has a much better exhale valve, that from what I've seen it doesn't look all that cheap and thin.
Extraordinario video, lástima que mi nivel de inglés no me permita enterarme de todo lo que dices. La máscara alemana NVD (o Cheka o Polaca) M10, me parece la mejor. También me ha sorprendido la máscara soviética, creía que era peor pero viéndotela puesta me parece mucho mejor de lo que pensaba. Pero mi preferida es la alemana de la Alemania Oriental. Muchas gracias por compartir Un saludo desde España.
Just now bagged myself a Danish Surplus MK2. $35 for the bag, mask, and an old filter to be used for display only. The LAG masks seem to be $50+ here in the States, and the C3s I find are pretty ludicrous at $90-$100, and I got one of those a week or so ago for about $57. There was a Dutch C3 listing that just expired that ended in price around $44. Wish I would have actually grabbed one when I could have because they're an interesting variation because of the plastic exhale/voice diaphragm cover.
They actually do still make filters for the M10 they make them in West Germany and another country in Europe you can find a bunch of filters on eBay and I do not contain asbestos
Good video as always the best cheapest surplus mask are probably the CM4 draeger M65/Z65 and the GP5 there all well made and are very common and are all 40mm masks which is most common mask filter thread, I k there different like GP5 being GOST and ABEK etc.
Pretty sure that the czech cm3 filter is, for the most part , safe. I've done lots of research, and can't seem to find any info on it containing asbestos. Don't know about the Polish MC-1 version though
I certainly wouldn't trust it, as we know for certain that every Soviet filter of the same period contained about 7.5% asbestos, and Czech filters were made to the Warsaw PACT standard, so, for example, the Polish EO-14 filter despite being made in Poland also contains asbestos, until someone gets a job lot of Czech filters tested we won't know for certain but the odds are they contain asbestos.
Weaponsandstuff93 the filter is a charcoal filter and should be safe. Again I've done more research now, but I probably won't use the filter too just in case
I found that Czech CM4s are among the best. You can get them for 20€ or less and are compatible with current NATO filters while still being pretty good.
I think on eBay you can get the full gp5 kit You know filter that you shouldn't use, satchel or bag whatever you want to call it, the mask itself for about £9
if you live in germany you can basically get any mask between 1€ (mostly GP5) to 50€ (special prototypes and masks with a confirmed history) usualy they cost 12€. filters depends where you buy them and what you buy. they go from 2€(asbestos alert!) to 20€(nato filters usualy mostly safe to use)
M62 are great. the straps can rip of (had it happen 3 times) and can get stuck so that you cant change the size. they use M40 filters and i can only recomand to beginners. the come as far as i know only with nonasbestos filters.
what non gas mask items would you reccomend I get for my collection? I've allready got a current hazmat suit (I know a guy in OSHA), an Individual Protective Cover, though I do want a second one, a few decontamination packets, and a chemical agent detector, but I'm trying to get some other stuff. I almost bought an old gas container from ww2, it was pretty cool. contained mustard gas if I remember correctly, and you'd attach a tripwire to an explosive that you had on the back of it, and if anyone tripped it they'd get gassed
Hey so if I have a fp5 filter and it expires but all I want the filter is for it can protect me against only dust should I be fine? Or do I still have to buy a new filter?
Hey Liam , my mask filters (including m10m filters) have a salty smell when breathing through them. is this normal ? would love to know so I can safely use them. ps. love your videos
The best way to describe the smell would be " salty " . I have tested it on my pmk2 filter and my m10 m. on the pmk2 it was both that smelled weird(mask and filter ( I don't wear them anyway)) and on my m10 m its just the filters. The mask itself still has a slight smell of rubber and talcum powder.
You forgot the Swedish m9 version . they Swedish version was like the Finish version but it was green and the name of it was Skyddsmask M/59 . I have used them many times in my military service here in Sweden . But now we use a newer type of mask
No problem, Your English is very good, I just often get lots of comments telling me I forgot to include things in the videos which gets annoying after a while.
another question, what do you think of the new masks? I'm talking about the ones that are reffered to as Boba Fett masks. Infared sighting, AC, bulletproof, I wish I had the money to get one.
They probably no longer work well, seeing as you won't have any new filters from them made since the early 1990s if they are sealed they will expire fairly soon after opening. And it's not been confirmed but as every other Soviet filters contained asbestos it would be a safe bet to assume they do.
The thing about gas masks from your own country being cheaper... do you know how cheap CM-3, CM-4 or M10 is if you are czech (like me)? CM-3 is usally the most expensive out of these at around 7 or 8 pounds (most likely due to age and lower numbers - CM-3 are oldest out of these so it makes sense there is fewer of them than CM-4 or M10), M10 is usually about 6 or 7 pounds and CM-4... I found one for as little as 4 pounds.
6:51 YAY MY GAS MASK , i should say that i am proud on this gas mask , i use it in really heavy duty tipe of things like , exm : angle grinding dust , rust etc ; welding fumes , paint ,wood dust and so on :D I really like it , i have 2 of these :) PS : It's M1 from yugoslavia , made in my city by the company named TRAYAL , they make best gas mask since 1982 , btw my gas mask is from 1982 soo it's really good and really really proud of this product :D
Yes and no, closing it is a much better idea than leaving it open but if too much vapour gets in, while it's open the charcoal will become saturated, please watch my video on this so I don't have to repeat myself regarding it.
Since there has been talk about N. Korea and ICBM's and nukes, I would assume that gas mask, respirators, NCB suit, and how to survive a nuclear apocalypse videos would be very popular, so if I were you I would make more videos like that, to really cash in on that and make a name for yourself.
I need help. My PMK-2 lenses keep fogging up, even after I bought anti-fog solution and put in on the lenses. Can you please help? Any advice is appreciated.
Well, there's one more thing I wonder about. In the kit that came with it, it came with a round metal box labeled НПН and inside has what's the seller called : film for sweating glasses. Any idea what that's for?
Normally it's the stuff you sandwich between the lenses and the inside of the mask that acts as an anti-fog, every major Soviet mask since the GP-5 has come with them but most people don't bother installing them.
I own a m51 that came with a brown filter in Arabic text for 5 dollars on an app called letgo. The guy who was selling it had no idea how gas mask worked so I got it for 4 dollars lol
£361 according to a currency converter so £16 or so per mask on average, still a lot cheaper surplus wise than collecting helmets, uniforms, firearms etc but yeah expense and value are relative I guess
@@Weaponsandstuff93 in denmark aka the country of hotdogs and the thing we call '' grillmad''.. Its hard to find them i get them from germany at our good buddy ivan xD for about 300 krones
Mostly every comment, sometimes people leave comments and they don't show up in my comment feed, other times people leave really weird comments and I have no idea what they are talking about.
Eric Jankowski You need to have the canteen with you and plug the plastic plug thing on the cap. To attach the tube you need to press really hard into it so be careful. It will release pressure. Also the tube moves with how far the tube is pushed forward. The filters in the silver packages are okay by the way. Made in the 90s and that when people knew about asbestosis.
the asbestos is located closer to the bottom of the filter and will have to go though everything else before before it reaches your system worst the can happen with an undamaged filter is short term respiratory problems Source: I've had an unsealed GP-5 filter in my bedroom for about two years now so unless the filter is leaking you're good
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
@ 2:23 I'm a simple man....I'll just take the one that makes me sound like Darth Vader
Nobody cared until I put on the mask...
@@justshane9967 nobody cared who I was till I put on the mask
5:30 Its clear the designers didn't get their priorities straight when the bag is better quality than the mask it's meant for.
It could just be that a different factory was issued the job of making the bags.
I mean they did prove some of the issues that the m51 had with the m53. Other than the strap system not changing. It has a much better exhale valve, that from what I've seen it doesn't look all that cheap and thin.
But is the Nokia M61 indestructible just like the phones?
im pretty sure that's the mask that melts '.'
No the Yugoslav m1 melts not the M61
WJ C r/woooosh
I used to have a nokia, I dropped it and the screen turned purple
War Doge how is that a woosh
I was surprised you didn't include the Israeli civilian mask.
It's not always cheap, at least not the price ranges of these masks.
True
I got my Israeli gas mask at the mall lol.
There not cheap
Illegalskittles yeah that was my first gas mask.
4:00 Slap some flex-tape on it
hahaha
Thank you I have been wanting to start a collection myself
Glad it's useful.
Portal2master me too ;)
I just started a collection of 2 gas masks and looking for more
When you put the mc1 gas mask on you sound like a robot
Probably the metal grate vibrating.
More like that droid in star wars episode VI. That one in jabba the Hutt's palace
I also have a M51 French one. I got it at a flea market for about $15.
Extraordinario video, lástima que mi nivel de inglés no me permita enterarme de todo lo que dices.
La máscara alemana NVD (o Cheka o Polaca) M10, me parece la mejor. También me ha sorprendido la máscara soviética, creía que era peor pero viéndotela puesta me parece mucho mejor de lo que pensaba. Pero mi preferida es la alemana de la Alemania Oriental.
Muchas gracias por compartir
Un saludo desde España.
me too
Just now bagged myself a Danish Surplus MK2. $35 for the bag, mask, and an old filter to be used for display only. The LAG masks seem to be $50+ here in the States, and the C3s I find are pretty ludicrous at $90-$100, and I got one of those a week or so ago for about $57. There was a Dutch C3 listing that just expired that ended in price around $44. Wish I would have actually grabbed one when I could have because they're an interesting variation because of the plastic exhale/voice diaphragm cover.
Yeah where you are in the world will vary the prices of certain surplus items, the export model of the C3 looks cool but I've never seen any for sale.
They actually do still make filters for the M10 they make them in West Germany and another country in Europe you can find a bunch of filters on eBay and I do not contain asbestos
West Germany doesn't exist anymore.
@@Weaponsandstuff93 I mean in the west side of Germany. That's all I know. Cuz I just ordered new filters this week that don't have asbestos.
Watching this and remembering better times for the gas mask collecting hobbies
I want to start a collection but money is tight great video!
Cheers
1:03 i have the exact same mask, with the green filter.... and i wore it.. dang
3:40 "surplus masket"
Good video as always the best cheapest surplus mask are probably the CM4 draeger M65/Z65 and the GP5 there all well made and are very common and are all 40mm masks which is most common mask filter thread, I k there different like GP5 being GOST and ABEK etc.
It's GOST and STANAG, ABEK is the industrial equivalent of NBC/CBRN.
Weaponsandstuff93 ok cheers
Pretty sure that the czech cm3 filter is, for the most part , safe. I've done lots of research, and can't seem to find any info on it containing asbestos. Don't know about the Polish MC-1 version though
Great vid btw
I certainly wouldn't trust it, as we know for certain that every Soviet filter of the same period contained about 7.5% asbestos, and Czech filters were made to the Warsaw PACT standard, so, for example, the Polish EO-14 filter despite being made in Poland also contains asbestos, until someone gets a job lot of Czech filters tested we won't know for certain but the odds are they contain asbestos.
Weaponsandstuff93 yes I know about the eo-14, and I understand your point of view. Thanks for replying. Again, great vid as always 👍
Weaponsandstuff93 the filter is a charcoal filter and should be safe. Again I've done more research now, but I probably won't use the filter too just in case
I found that Czech CM4s are among the best. You can get them for 20€ or less and are compatible with current NATO filters while still being pretty good.
Pretty sure they are GOST not NATO but otherwise yes good masks.
It super highly depends where you are from, the M45 and M51 are up to 50€ here
I think on eBay you can get the full gp5 kit
You know filter that you shouldn't use, satchel or bag whatever you want to call it, the mask itself for about £9
Currently in America the m10m and gp5 mask are the most common .
Gp5s start at 19 dollars
M10ms start at 30 dollars
if you live in germany you can basically get any mask between 1€ (mostly GP5) to 50€ (special prototypes and masks with a confirmed history) usualy they cost 12€. filters depends where you buy them and what you buy. they go from 2€(asbestos alert!) to 20€(nato filters usualy mostly safe to use)
Also make sure you use GOST/Normalised filters only with Soviet masks as not to damage the threads and have an air tight seal.
My favourite gasmask is shms. It was little painful to put on, until I found right wearing tecnique.
M62 are great. the straps can rip of (had it happen 3 times) and can get stuck so that you cant change the size. they use M40 filters and i can only recomand to beginners. the come as far as i know only with nonasbestos filters.
Do you mean the M61 or M65 or the M65 early version the M62?
i am not really into gas masks myself but i am really enjoying these videos especially the theory videos
Glad you get some enjoyment out of them.
i've seen gp-7's go for almost the same prices as gp-5's
Ikr but if you want to buy one, buy the gp7v or the pmk
what non gas mask items would you reccomend I get for my collection?
I've allready got a current hazmat suit (I know a guy in OSHA), an Individual Protective Cover, though I do want a second one, a few decontamination packets, and a chemical agent detector, but I'm trying to get some other stuff.
I almost bought an old gas container from ww2, it was pretty cool. contained mustard gas if I remember correctly, and you'd attach a tripwire to an explosive that you had on the back of it, and if anyone tripped it they'd get gassed
Get a Geiger counter.
allready have one, forgot about it.
technically a LFC radiological survey meter.
i need to make my collection look a bit bigger so looking for some cheap masks
Cool
Wating for the apple phone company to make their mask
The Imask
But you cant use every other filter you have to use the I mask filter
@@kaseylane361 basically every soviet mask
ik its 2 years old mask and you might know it but nokia they created a mask the name is M61
in belgium i got a m51 for about €9 in 2019 in perfzct condition with filter and bag
I use particular fliters that fit
So close to 100k!
Hey so if I have a fp5 filter and it expires but all I want the filter is for it can protect me against only dust should I be fine? Or do I still have to buy a new filter?
P3 filters don't really expire so it should be fine against dusts.
I had a m51 once i bought it more like 10 dollars and i remember wearing it and being like "wow i look like a bug"
I like the gp5...
what? there's nothing wrong about it
Hey Liam , my mask filters (including m10m filters) have a salty smell when breathing through them. is this normal ? would love to know so I can safely use them.
ps. love your videos
You sure it's the filter that smells and not the mask?
The best way to describe the smell would be " salty " . I have tested it on my pmk2 filter and my m10 m. on the pmk2 it was both that smelled weird(mask and filter ( I don't wear them anyway)) and on my m10 m its just the filters. The mask itself still has a slight smell of rubber and talcum powder.
The filters shouldn't smell so I assume something is wrong, however maybe you are just sensitive to a certain component?
Probably me being sensitive to a component because both filter are totally different. Thanks
You should add links to what you think are the best places to buy gasmask online are
eBay
Before Nokia made phones they made gas masks........
I don't know why but something tells me they won't break
You forgot the Swedish m9 version . they Swedish version was like the Finish version but it was green and the name of it was Skyddsmask M/59 . I have used them many times in my military service here in Sweden . But now we use a newer type of mask
I didn't forget it but I didn't include it, I mentioned in the video there are loads of cheap masks available.
Im sorry my english is not The best .I Was little tog fast to write my comments
No problem, Your English is very good, I just often get lots of comments telling me I forgot to include things in the videos which gets annoying after a while.
Hey how much is a s10 gasmask over there
that one german m62 fits and seals to my face very well, I am american. Also I shouted you out in one of my videos
Cool thanks, what size M62/M65 is it?
i am not quite sure
You seemed to be struggling at the end, are you ok?
The French m51 looks like a gp5 that isn't hooded
another question, what do you think of the new masks?
I'm talking about the ones that are reffered to as Boba Fett masks.
Infared sighting, AC, bulletproof, I wish I had the money to get one.
Never heard of them.
ruclips.net/video/in8Ere3ON6E/видео.html
Looks totally fake, just some airsoft mask by the look of it.
maybe, but imagine if it was real...
that would be cool
What is higher risk of lung cancer ? Smoking 15 Cigarettes a day or breathing through the GP5 Mask With the Filter For 20-30 mins? @weaponsandstuff93
Where can I get the cm3? eBay I’m guessing or do they sell in surplus stores?
Yeah eBay
do pbf filters work? if so do they have asbestos. and how long do they last
They probably no longer work well, seeing as you won't have any new filters from them made since the early 1990s if they are sealed they will expire fairly soon after opening.
And it's not been confirmed but as every other Soviet filters contained asbestos it would be a safe bet to assume they do.
damn. I wanted to get one. I was just looking at some soviet masks
You can wear the mask without the filters in it.
The thing about gas masks from your own country being cheaper... do you know how cheap CM-3, CM-4 or M10 is if you are czech (like me)? CM-3 is usally the most expensive out of these at around 7 or 8 pounds (most likely due to age and lower numbers - CM-3 are oldest out of these so it makes sense there is fewer of them than CM-4 or M10), M10 is usually about 6 or 7 pounds and CM-4... I found one for as little as 4 pounds.
Is there a bag for the shalon 4a1 if not what is a good pne
I don't actually know if they are issued with bags but it will fit in any gas mask bag as it's a small mask.
6:51 YAY MY GAS MASK , i should say that i am proud on this gas mask , i use it in really heavy duty tipe of things like , exm : angle grinding dust , rust etc ; welding fumes , paint ,wood dust and so on :D I really like it , i have 2 of these :)
PS : It's M1 from yugoslavia , made in my city by the company named TRAYAL , they make best gas mask since 1982 , btw my gas mask is from 1982 soo it's really good and really really proud of this product :D
I have the finnish and yes its a rlly good mask in my opinion
I got an schm-41m gas mask for 30 bucks with the filter, bag, mask, and hose
Cool
You can breathe without the filter on the GP-5 ?
Yes but the mask gives no protection.
Weaponsandstuff93 Thanks for the info and sorry for the maybe stupid question
if a new filter is open can it be closed to be saved again and use later
Yes and no, closing it is a much better idea than leaving it open but if too much vapour gets in, while it's open the charcoal will become saturated, please watch my video on this so I don't have to repeat myself regarding it.
Good video, it will become useful
Cheers
Good video idea gp5s near me cost 20$ I'm In Michigan USA
GP-5s aren't great for prepping though due to the cost of getting modern filters for them.
My grandfather give me a m10 with bag and chemic suit.
Cool
i once saw a gp-5 for 70pounds
Since there has been talk about N. Korea and ICBM's and nukes, I would assume that gas mask, respirators, NCB suit, and how to survive a nuclear apocalypse videos would be very popular, so if I were you I would make more videos like that, to really cash in on that and make a name for yourself.
I did a video like that already.
Oh, I must've missed it! Gotta check it out now.
Would the U.K. Market be the same ad the Irish one?
Probably similar, I just use UK ebay, a lot of sellers ship internationally.
I need help. My PMK-2 lenses keep fogging up, even after I bought anti-fog solution and put in on the lenses. Can you please help? Any advice is appreciated.
Does the PMK-2 have a nasal cup?
If you mean inner mask, no. At least not like the Shalon 4A1. It is the same design as a PMK-1 though on the inside.
That's why it's fogging up, other than putting the paste on the inside of the lenses you won't be able to do anything about it.
Well, there's one more thing I wonder about. In the kit that came with it, it came with a round metal box labeled НПН and inside has what's the seller called : film for sweating glasses. Any idea what that's for?
Normally it's the stuff you sandwich between the lenses and the inside of the mask that acts as an anti-fog, every major Soviet mask since the GP-5 has come with them but most people don't bother installing them.
Hello I have an Antique store where I live they are selling a go-5 in bad condition what should i say?
Edit: it’s 60$ lot o money
Don't buy it obviously
can these mask run a 40mm NATO Filter?
The NATO ones yes.
I have the m51 and there is no rubber at all
I got my Dräger M65 for 10€
I own a m51 that came with a brown filter in Arabic text for 5 dollars on an app called letgo. The guy who was selling it had no idea how gas mask worked so I got it for 4 dollars lol
Cool, just be careful with the filter.
Weaponsandstuff93 yeah I know
It's probably a nato filter that won't fit into my gp5. But it does fit into the m51
I think that the polish MC-1 is really cheap. I got one for 10zł so 2,29 US dollars
Colleting gas gas masks can be expensive as hell... And if you have 22 like me around 3000 krones (danish coins) sorry idk what it is in £
£361 according to a currency converter so £16 or so per mask on average, still a lot cheaper surplus wise than collecting helmets, uniforms, firearms etc but yeah expense and value are relative I guess
@@Weaponsandstuff93 in denmark aka the country of hotdogs and the thing we call '' grillmad''.. Its hard to find them i get them from germany at our good buddy ivan xD for about 300 krones
Are m10m filters safe
Safe probably but long since expired.
If they are seald are they then still good for dus or partikels
What is the rarest Gas Mask you own?
British C7
You are the only youtuber i know which replies to every single comment.
Mostly every comment, sometimes people leave comments and they don't show up in my comment feed, other times people leave really weird comments and I have no idea what they are talking about.
Ok. Btw I love your videos :D
Thanks.
i used my soviet gas mask with the original filter but but lost it
At least by losing it you won't inhale any more asbestos.
yeah i'm glad i did, didn't think asbestos would be used in filters
@@Packers786 Well abestos has a very effective "anti-chemical" protection so they used it before they knew it was hazardeous.
Nice vid.
Thanks.
I have the m51 with original filter
Don't use that filter.
I got a gp5 in great condition for 2.10
there a GP-5 for 2$ online
Filters will cost a lot more though.
Postage will be a lot tho
The M10 gas mask bag is fake the original has buttons and a more durable material you can get the original bag with the mask in Slovakia
🙌🏼💕
What would you say is the highest quality mask on this list?
The Finnish M61 by far.
Cool video
Thanks.
Im just here for corona
A lot of people are on my videos recently
So the Nokia mask is as indestructible as their phones?
Well considering they all work 50 years on.
is the Czech M10 safe?
The mask yes, the filter nobody knows.
thanks this helps alot i was thinking about getting one
can you use the drinking tube on it
Eric Jankowski You need to have the canteen with you and plug the plastic plug thing on the cap. To attach the tube you need to press really hard into it so be careful. It will release pressure. Also the tube moves with how far the tube is pushed forward. The filters in the silver packages are okay by the way. Made in the 90s and that when people knew about asbestosis.
Joey Enochs the Soviets never cared
I Live in the uk
M10m is a thicc boi
Like as m65 and gp5m
Why must this happen I want them all I’m gonna go bankrupt
i spand a lot of money litterly 30 pounds for a dust mask thta dose nothing only filter... dust
I'm here for corona virus
Lol I got mine with the filter for 5€
6:54
Peter GamingTvHd actually designed for Jews...
I live in russia and we haven't asbest in filters
I HAVE M1
Cool.
IS THE M1 FROM YUGOSLAVIA
AcaBRO YES
Its been confirmed that the gp5 filter does contain asbestos, but not enough to harm you
Any amount of asbestos can harm you, obviously, the more you inhale the more damage it does.
There'll always be a risk of lung cancer if there's asbestos present. Of course you'll probably be safe, but personally I don't want to risk it.
Immediate danger and getting asbestos poisoning and dying 40 years early are still good.
the asbestos is located closer to the bottom of the filter and will have to go though everything else before before it reaches your system worst the can happen with an undamaged filter is short term respiratory problems
Source: I've had an unsealed GP-5 filter in my bedroom for about two years now
so unless the filter is leaking you're good
First
Cool