That flap in the exhaust is for preventing the helicopter like noise when the motor kicks down to V4. Get rid of it and get an AFM disabler for your truck and it'll sound nice.
to start you should definitely get the afm/dod turn off tune i’m going through the collapsed lifter bs right now because of it and if i can recommend a full exaust definitely most definitely the 3 inch stainless carven R system best on the market!!
i feel u garret, i was trying to solder a radio harness together that i previously butt spliced together, and just gave up and didnt have a radio for months, until i finally connnected everything together and got it working again lmfao
Why didnt you just go get pipe to replace the muffler and keep it all the way out the back? Couldve maintained factory look with a bit more rumble. Now your going to have cab drone and all..🥴
Pipe both sides to and pipe and then straight out the back with some tips and you won't be disappointed. I have my 2004 Chevrolet avalanche 5.3 like that and it sounds like a beast
That valve is there for bakcpressure at low rpm, it's to help with scavenging and efficiency at lower rpm when taking off, to avoid the clappy level of noise avoid any giant tips on the end of the pipe as an exhaust is like a trumpet for an engine
Just cutting a muffler off usually sounds like that. I don’t like it to me it sounds like some old ragged out car. But I like cat back systems or I did a cat delete with a muffler before and I liked it
Get the super 10 that will make your truck sound good. Just let you you keep on doing and run like it .your going to have problems later on .just let you know .
This was such a throwback to straightpiping the moldy pickle 4 years ago
Yo my names trenton as well
@Aaron yo wassup aaron
I can’t be the only one who was looking at him cutting it in front of the hanger 😅
Amen
Stupid
Can't believe already at 100,000 subs. Congrats. Keep up the good work bro.
I love how Braydon talks aBout getting high performance exhaust on everything and Garrett cuts everything off and says screw it sounds good
With my 09 z71 metallic brown, exactly like yours just older, I installed an electric cutout and loved it, had it dump with a 5" tip
Now I gotta 2010 ram 5.7 hemi muffler delete, best sounding truck ever!
Alright it’s braydons turn to post I got you and Miller in a row😂
Sameeeeee
And halie
He just posted
Yea
MY GUY
The man is awesome, he says he wants to practice being safe but doesn’t have a seat belt on 😂😂
It’d be louder and sound a lot better if you actually got pipe ran back and welded on with some tips
I remember when you and Braydon cut whole exhaust system off the green truck🤣
Sama
same
Miller you and now Brayden all in the same hour👍
That flap in the exhaust is for preventing the helicopter like noise when the motor kicks down to V4. Get rid of it and get an AFM disabler for your truck and it'll sound nice.
If you like how it sounds I bet you would like it if you just did a simple Y-pipe and then dual it out the back, or just a single pipe muffler delete
The truck does actually sound pretty settle and clean for a straight pipe 12:23
Should I cut my 2021 6.2’s muffle off like this ??🤔
Have u deleted the afm (the v8 to v4) cuz if not I highly suggest doing it. If u do want a good product get the range afm disabler
in my opinion it needs just a tad more rumble to it... definitely sounds better thou!
Man all my favorite RUclipsrs are posting your defiantly one
Pretty sure if you would have turned the butterfly valve before the muffler open it would have made it louder. Never seen that before.
😂😂 cuts behind the hanger. That was hilarious
to start you should definitely get the afm/dod turn off tune i’m going through the collapsed lifter bs right now because of it and if i can recommend a full exaust definitely most definitely the 3 inch stainless carven R system best on the market!!
Yessir love all the new posts keep up the good work
Congratulations on 100 k man!
U can spray WD-40 on the rubber part of the hanger and it comes right out
I was guna say that too
Dual straight pipe with cats 5in tips way to go bro
Definitely recommend buying the v4 delete mabob before dod messes up on you
i feel u garret, i was trying to solder a radio harness together that i previously butt spliced together, and just gave up and didnt have a radio for months, until i finally connnected everything together and got it working again lmfao
Use WD40 on the rubber hangers to get them on and off. I love to way Corsa exhaust sounds on my 2015 Sierra.
I have a 14 and it’s your cats. I cut my exhaust off same spot and it sounds just like it. It’s even more loud when it’s cold out
I honestly like the clapping sound, but I do agree, I wish they were so loud😂😂
I put a aew ofg cat back exhaust on my 21 high country silverado. By far best exhaust for these chevys. Try it out you won't be dissapointed
Why didnt you just go get pipe to replace the muffler and keep it all the way out the back? Couldve maintained factory look with a bit more rumble. Now your going to have cab drone and all..🥴
I did the 3rd cat and muffler res on my 15 with a 3 inch pipe all the way back it sounds perfect not crackly much a good deep loud tone
Braydons so chill off camera i swear
Super 40 flowmaster without cats is a good sound
I yelled stop when you pointed where you were going to cut 😂
Get dual straights with 6 inch tips
Love what ya doing but I would want to compare yours to my f-150 I gotta borla atak with side exit right in front of passenger side tire
You should get some red accents on the exterior it will look so good with the red wheels
That white dodge looks very familiar that’s my buddy’s old truck
Garret you should double exhaust the truck to make it Good as Hell it will look more BadAss if you did that Boy!!💪🤠
If you get pipe welded in from where you cut it it’ll sound better with tips
those Ariat boots are so comfortable im wearing them right now
I think that valve is to make the truck quieter because the 2019s have it I don't know bout the 15s though
Do a full new exhaust. Some headers and other stuff
Pipe both sides to and pipe and then straight out the back with some tips and you won't be disappointed. I have my 2004 Chevrolet avalanche 5.3 like that and it sounds like a beast
bro that whit truck sounds gooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooood
Can’t wAit for Braydon to post the outlander is back
Congrats on 100k subscriber Garret
I know someone that has a Silverado like your and it sounds like that at but louder bc it’s a dual exhaust
Awesome vid and edits and filming and trucks congrats on 100,000
I was the 100,000 subscriber I waited till it got to 99,000
dylans truck sounds good and looks good
It won't pop or crack like what you're thinking because you still have a Cadillac converter on it which really mussels noises.
You can get the pops and cracks if you just true dual and leave the cats
Should definitely get the afm stuff turned off and that valve keeps it from sounding like a helicopter when it drops down from v8 mode
You off your muffler that was pretty cool about the whole entire video
Carven competitor series…. You wont be disasspointed ONE BIT
Isn't there a loss of back pressure lol how you feel like it has more power...
What’s going on with the cab over in the background?
Congrats on 100k dude!! Sorry I am late
Would doing this void my factory warranty??
I really like the sound of the truck sounds good
Cat back true dual stariaghts won’t disappoint
She got the Carolina clap now 😂
Dude your video was awesome!! Comedy/truck mods
The water is condensation off the motor from when it's running
Dylans truck sounds good
Got the right blades this time I remember with the ole bugger at least 3 blades broke 😂
Congrats on 100k 🥳🎉
Did make another video and cut off your catalytic converter and it'll sound louder
The rap music with a redhead in coybow boots.
TRUE DUEL CAT BACK EXHAUST. Mine sounded perfect
Does it only have one cat because my 2013 has three cat for some reason
It’s gonna have a back fire when u get the rpms up it sounds good to me
I think the 100,000 sub surprise is a four wheeler
Bro it sounds so good
What’s that cab over? Need a video on that!
Should put a vibrant muffler with a turn down on that thing
Show it to Brandon price like you did it with the moldy pickle
That valve is there for bakcpressure at low rpm, it's to help with scavenging and efficiency at lower rpm when taking off, to avoid the clappy level of noise avoid any giant tips on the end of the pipe as an exhaust is like a trumpet for an engine
just weld a pipe form where you cut and have it come out in a 4 inch tip or something
That thing doesn’t sound bad for what it is but that dodge 😂
I was fixing to say the same thing. I’ve got a magna flow exhaust on my truck and it kind of sounds like mine😂
What kinda tires you rocking garret?
Just cutting a muffler off usually sounds like that. I don’t like it to me it sounds like some old ragged out car. But I like cat back systems or I did a cat delete with a muffler before and I liked it
What led headlights and fogs are u using on ur truck?
I think that value is for back pressure to the engine but im not sure😂
True dual from the cats back with 5 inch tips
Where you been you said you were going to do videos everyday
It’s gonna be a good day 5 seconds later: I hate my life 😂
That’s a typical day in my life 😂
The valve makes it quieter on cold start
Bro do a side exit 🤙🏼
There is another sub to you man keep it up
Congrats on 100k
Awesome video garret
Put some glass packs on that thing
It sound good I need to get my exhaust done cause it’s way to loud
to be fair I have an 03 Silverado sounding like that dodge but it is toned down a little
What song is in the background?
Keep you muffler so you can weld her back on to get inspected
Get the super 10 that will make your truck sound good. Just let you you keep on doing and run like it .your going to have problems later on .just let you know .