that looks like an awesome platform to fish from. those west coast boats with the forward raked windscreens sure are distinctive. really don't see anything like it on the pilothouse boats over here on the east coast. i love that there's so much variety among the designers in the different parts of the country.
A fully etched welded aluminum boat!!! Few, way to few, builders remove the mill scale with acid- don't etch their boats prior to finish but these guys did!! Congratulations on a nicely finished boat.
I did buy a CK worldwide MT200 for doing aluminum TIG. I have already done some small aluminum repairs and parts for a few of my buddies boats. Been applying at local welding shops but they seem to want a full redseal and not an foundation apprentice. So just trying to make things happen on my own.
Thanks! I’ve talked to a couple people recently about building a Yellow Point. That bay is 20x42, and I think it’s a 16’ ceiling. I also have a 20x25 bay where we had the materials
Just curious, do you design your boats? If you do, what software do you use? I'm trying to learn via Rhynocad but havin a hard time starting with designing a little pram
Most of them I do, this one is a Bruce cope design. I have been working on learning rhino as well. My previous designs started with drawings, then scale models, and I lofted from the models.
It seems to be normal to go to the next process after doing R.T and U.T after welding. However, there is no such process in this video. It seems that problems will arise later.
Hey! There is a link to the designers website in the full description where you can find a study plan, or purchase the full plans. Good luck, and have fun building!
hey brotha , this is such an inspiration . two questions. could you have two 1000CC street bike engine in there or maybe cummins (inboard if designed differently. could that be adequate?) , and why is the head ( class angled down isnt that less aero dynamic and create more drag btw if you reply, support the comments it adds like a 40-60 % increase in long term viewership community . Hope this helps and hope the best!
I don’t think the street bike engines would last too well, but a Cummins would be sweet! I have one sitting in the shop for a boat build one day. Specmar has a design for a similar boat with a Cummins and an Arnson surface drive.
The reverse slope windscreens are quite popular out here. People like the way they look, and they are nice for fishing in the rain and also give a bit more interior space for radios etc.
Что за глупость делать переднее стекло с отрицательным углом? Я понимаю на буксирах, надо сверху смотреть прямо вниз, а тут то на нос чтоли удобнее будет смотреть? На калошу похоже, под обыкновенным углом, как у всех лодок нельзя было сделать?
"глупость"? Forward leaning windshield reduces glare, which is why it seen so often on commercial vessels (also less likely to break for a wave coming over the bow). It also allows you to stand closer to the helm/dash with room in front of your face and added room for overhead electronics. Forward leaning windows absorb less heat, so the salt doesn't cake up as bad, allows the rain x to do its job.
that looks like an awesome platform to fish from. those west coast boats with the forward raked windscreens sure are distinctive. really don't see anything like it on the pilothouse boats over here on the east coast. i love that there's so much variety among the designers in the different parts of the country.
The guy I built it for uses it for early season fishing, and it certainly is an excellent platform for it!
Amazing build and timelapse. Great looking boat as well. 👍👍💪💪
Looks amazing, excellent job. Congratulations
man that workshop looks amazing with the forrest behind the windows give us a tour
Thank you very much for the video. good job guys. 👍🤗👍🇸🇯
A fully etched welded aluminum boat!!! Few, way to few, builders remove the mill scale with acid- don't etch their boats prior to finish but these guys did!! Congratulations on a nicely finished boat.
magnifique travail et bateau !! 😍👍
Good job! Nicely put together.
What a cool shop with all the windows
Sweet shop bro. Nice job on the boat.
기술이 멋지네요
Very nice video
I want one. Beautiful boat. 👍
Muy buen trabajo 👍🏻
Me encantaría dedicarme a construir botes como ustedes.
Saludos desde Argentina
Very cool ! Thank you.
Beautiful job mate! Cant wait till my first boat build.
Thanks! They are pretty satisfying to do! What are you going to start with?
Jon boat for the lake to get the kid on the lake with me and also some custom pontoon frames for my inflatable pontoons.
I did buy a CK worldwide MT200 for doing aluminum TIG. I have already done some small aluminum repairs and parts for a few of my buddies boats. Been applying at local welding shops but they seem to want a full redseal and not an foundation apprentice. So just trying to make things happen on my own.
Brilliant job Eli.
Thanks Kama! Wouldn’t be there without Steve!
Nice build I was looking at this model to do too
omg,love this boat
Sensacional demais 👏👏👏👏👏👏 show de bola 🙏🔥❤️✌️👍
Good job brother
Nice boat,i like you boat
Nice job! That’s one way to no she’s sea worthy and save some cash!!
amazing
Show de bola ⚽️
É um desse que quero comprar
Sick !!!!
nice one this make a boat 🏊🏊🏊🏊🏊
Indonesian said.... Mantappppp
Fantástico 👏👏👏👏👏👏👍👍👍👍👍👍👍✌️🙌❤️
Can I come learn how to make boats with you guys? A set up like yours is my goal
My style of boat , only thing I've got to win the lotto first
Saya sang at suka
Great looking fishing boat. Got any running videos of that 23'? What engines did you install?
May 2000
Or May b they should reply to you
😍
Thank you for sharing nice video👍👍👍 what’s the gauge for the aluminum sheets?
Pls do a complete video
Thanks from you neighbor slam Bang lodge Kyuquot stop in for coffee
Hey just curious on the cost of materials I know the price of aluminum changes lots just wondering on a rough estimate
How long does it take to complete from start to finish? Thanks
Hi
Do you have the thickness of the plates/bulkheads and stiffeners please ?
That's a lot of money on jigs!
😎👍
Thanks! 😊
I really wanted to be the 7,000th subscriber! Lol
Hehe thanks 😊
Wow! Awesome work! Been eyeing up the yellow point 23 myself. How big is your shop? About 12' ceilings?
Thanks! I’ve talked to a couple people recently about building a Yellow Point. That bay is 20x42, and I think it’s a 16’ ceiling. I also have a 20x25 bay where we had the materials
@@EM-hu2bj oh right on! That looks like a good size for that project
Need this in a 18ft
Great build man, where are you getting your windows and doors, I'm building a pilot house and having a heck of a time finding windows
They are from AJR Marine Windows in Port Coquitlam, British Columbia. Diamond Sea Glaze would be another outfit to try.
How much cheaper is it to build your own boat
How much does material cost to build something like that?
Awesome video! How much in material did it cost?
No less than 20k
This shop🤌🏼
Just curious, do you design your boats? If you do, what software do you use? I'm trying to learn via Rhynocad but havin a hard time starting with designing a little pram
Most of them I do, this one is a Bruce cope design. I have been working on learning rhino as well. My previous designs started with drawings, then scale models, and I lofted from the models.
@@EM-hu2bj Hello, Are you doing any structural analysis for the boats? Can you give me little bit information about it?
@@EM-hu2bj hello do you sell your boat design? Im interested
How much does one cost?
Anh có thể làm chiếc tàu của anh ngang 4met dài 25met không nếu có thể làm nó thành một căn nhà di động trên biển thì quá tuyệt vời
I. Want to now more
Great video and what a ship! Do you sell the aluminium package as well? So you can weld it youself? Let me know! Cheers
The design is by Bruce Cope. If you look at the full video description you will see a link to his website where you can order plans and cutting.
Way gauge is the hull?
Qual tamanho da lancha?
hey nice boat! how much time it took to build it on average ?
Do you have the plans for sale by any chance? and may i know how much for the pre cutting price?
Google Bruce cope aluminum boats. You can find the plans there
Can you please tell me how much it cost roughly
What was the ticket price on this?
Hi I'm from Bangladesh
Please can you give me design and body measurement of this boat
How much it will cost with out the motor ?
I would take that across an ocean interstate.
Load it up with fuel and foods and buonvoyage.
Outstanding!!! Did this model have a reverse chine?
Thanks! Yup, you can see it go in at 0:37
@@EM-hu2bj Have you built one of Bruce's 17' CC? hull C048?
@@johnalloytoy I’ve only built the one Cope design so far. It was a good experience though, I’d certainly do another.
What is the pricing on a project like this? All in?
It seems to be normal to go to the next process after doing R.T and U.T after welding. However, there is no such process in this video. It seems that problems will arise later.
What problems specifically. Define "R. T" and "U. T".
Kaç kg bro
Terrific job, but, how long DID it take? 2 or 3 people?
Hey! Most of the time it was two of us, and it took about 320 hours :)
Safi pliser du voir sa
I want to buy one
How long dose it take to build
Off hand I think this one was around 320 hours for me, most of it with a helper.
How much does it cost
What class of aluminium you are using?
The plate is 5052 and 5086, and the extrusions are 6061
Bro am in Africa please can I get pdf of the measurements I Wana make one like that. It's been my vision to start making boats.
Hey! There is a link to the designers website in the full description where you can find a study plan, or purchase the full plans. Good luck, and have fun building!
Is it possible to buy the building plans?
Cope aluminum boats sells the plans for the winter harbour 23
hey brotha , this is such an inspiration . two questions. could you have two 1000CC street bike engine in there or maybe cummins (inboard if designed differently. could that be adequate?) , and why is the head ( class angled down isnt that less aero dynamic and create more drag
btw if you reply, support the comments it adds like a 40-60 % increase in long term viewership community . Hope this helps and hope the best!
I don’t think the street bike engines would last too well, but a Cummins would be sweet! I have one sitting in the shop for a boat build one day. Specmar has a design for a similar boat with a Cummins and an Arnson surface drive.
The reverse slope windscreens are quite popular out here. People like the way they look, and they are nice for fishing in the rain and also give a bit more interior space for radios etc.
@@EM-hu2bj hell yeah thanks for getting back!
Bonjour je me demande si vous accepteriez nous apprendre ce métier. si vous pouviez donner une réponse de la moi
👌I want to work with you
What welder do you use ? Thanks
Most of this one was built using a Lincoln 350MP with a Miller XRA push-pull. Cheers!
@@EM-hu2bj nice, Ta!
@@EM-hu2bj big money welding setup. push pull is so expensive
that's a sexy pilothouse design. You really made a tight looking craft. The rake on the house is perfect.
How much price? I am interested
No no no
This how you find early people in business, they think they are the only manufacturer
Is this available as a kit?
Yup, from www.aluminumboatdesigns.com/
@@EM-hu2bj brilliant thanks
Hold X
Which design is it on the website
It’s the winter harbour 23 :)
@@EM-hu2bj how much you think it will cost me?
HI😊 I'm a manufacturer of anti-roll gyroscopes.
Что за глупость делать переднее стекло с отрицательным углом? Я понимаю на буксирах, надо сверху смотреть прямо вниз, а тут то на нос чтоли удобнее будет смотреть? На калошу похоже, под обыкновенным углом, как у всех лодок нельзя было сделать?
"глупость"? Forward leaning windshield reduces glare, which is why it seen so often on commercial vessels (also less likely to break for a wave coming over the bow). It also allows you to stand closer to the helm/dash with room in front of your face and added room for overhead electronics. Forward leaning windows absorb less heat, so the salt doesn't cake up as bad, allows the rain x to do its job.
Waste of transom space, bad design.
Number plzz
This is a great project... I've dropped you an email please check out for it thanks