I love yur videos as im just getting into embroidery. I have a brother se700 which is similar to the 600. After i cut jump stitches, i have these small tails that i can seem to cut close enough. ive noticed that some are using a heat gun for something after they are done. Is that to melt away the small tails? ow do i cut them close enough?
Use a lighter. Move it back and forth never keeping it in one spot. It will melt away those small annoying tails that can’t get to. It can also ruin your project if you hold it still too long. Be careful.
I’m starting me tshirt biz on a light budget and see what I can do. I know this not your video on heat pressing or using silhouette studios but fam if you can link your video on where I can get some heat transfer vinyl on decent budgeting. Salute to your success and love you giving with all this million dollars worth of knowledge
Thanks so much. No problem I got you. Most vinyl prices are the same. Trust me you don’t want super cheap vinyl because it will give you Susie’s cutting and weeding and you will end up wasting most of it. Trust me from experience. Here is where you should get your vinyl and use the link in this video. Almost every type of vinyl in this video. ruclips.net/video/1IwOM5eCcT4/видео.html
Oh. No. I appreciate it anyway. If any of my videos encouraged you to buy the 2001 call them and let them no. If not no big deal I appreciate you anyway. I want that two heat machine. Maybe sometime later this year when I get my new space. Congratulations Belenda.
For some reason my se 625 keeps getting the thread loose at the top and doesn’t finish a design I have to keep rethreading the machine every other stitch. I though to change the bobbin and still have the issue do you have any advice?
Is that the single needle machine that’s 2k? If so it’s ok. If it can do what you need it to do them go for it. Personally I wouldn’t get it though. after the brother pe800 or se1900 the next step should be a multi needle in my opinion. When you start getting up in the thousands I want the color to change on its own. You get a slightly larger sewing field but you still have to change ever color manually. It’s something to think about. Ultimately it’s about what works for you and your budget.
my husband was a trucker for 45 yrs this is an amazing design
Thank you.
I love yur videos as im just getting into embroidery. I have a brother se700 which is similar to the 600. After i cut jump stitches, i have these small tails that i can seem to cut close enough. ive noticed that some are using a heat gun for something after they are done. Is that to melt away the small tails? ow do i cut them close enough?
Use a lighter. Move it back and forth never keeping it in one spot. It will melt away those small annoying tails that can’t get to. It can also ruin your project if you hold it still too long. Be careful.
Thx a bunch
I’m starting me tshirt biz on a light budget and see what I can do. I know this not your video on heat pressing or using silhouette studios but fam if you can link your video on where I can get some heat transfer vinyl on decent budgeting. Salute to your success and love you giving with all this million dollars worth of knowledge
Thanks so much. No problem I got you. Most vinyl prices are the same. Trust me you don’t want super cheap vinyl because it will give you Susie’s cutting and weeding and you will end up wasting most of it. Trust me from experience. Here is where you should get your vinyl and use the link in this video. Almost every type of vinyl in this video. ruclips.net/video/1IwOM5eCcT4/видео.html
That came out nice 👍
Thank you Lucy
I didn’t see the link. My Ricoma MT2001 is coming tomorrow. Looking forward to the one on one opportunity.
Oh. No. I appreciate it anyway. If any of my videos encouraged you to buy the 2001 call them and let them no. If not no big deal I appreciate you anyway. I want that two heat machine. Maybe sometime later this year when I get my new space. Congratulations Belenda.
Looks Great 👍
Thank you.
👏🏾
Hey Queen.
@@adubbproductions hello king
What type of stabilizer is that and how do you advoid gaps
For some reason my se 625 keeps getting the thread loose at the top and doesn’t finish a design I have to keep rethreading the machine every other stitch. I though to change the bobbin and still have the issue do you have any advice?
Do you use the Fil Tec magnetic Bobbin on the Ricoma em 1010 ? The Design looks Smooth 💯
no. I just use the standard plastic bobbins I get pre-wound on amazon.
What do you think about the brothers nq17003
Is that the single needle machine that’s 2k? If so it’s ok. If it can do what you need it to do them go for it. Personally I wouldn’t get it though. after the brother pe800 or se1900 the next step should be a multi needle in my opinion. When you start getting up in the thousands I want the color to change on its own. You get a slightly larger sewing field but you still have to change ever color manually. It’s something to think about. Ultimately it’s about what works for you and your budget.
Did you move your cap driver down so the hat sits closer the the arm? On em1010
No.
Can you do hats with the brother se 600?
Yes. Non structured hats. ruclips.net/video/g9m8nwNzal8/видео.html
ruclips.net/video/J2YDoKP-gm0/видео.html
What is the date?
Thanks for watching. I appreciate it
How is the Ricoma holding up?
I have seven heads in total now. looking to add four more this year. These things print money.
@@adubbproductions Bless you! May I ask what thread you use and needles for embroidering t-shirt, hoodies and caps?
Point of break off with you and all connected persons.
? I’m not sure what you are asking. Are you ok?