Great Video, Thanks, got the D7 so going to try myself. You clearly stated unboxing in beginning so exactly what you’d go through. Not pre planed cutting out all the real thought process you actually go through, so while yes a bit slow but very helpful.
Do you need to pay a subscription to use the XTOOL D7? Is there any requirements Or can anyone buy it and just use it? Cheers mate great video you gained a sub 👌
are these keys cheap ones that you can get on ebay? or are they pre programmed genuine ones? aka do these keys need the chips programming before or just this step with x tool? thanks!
Its been flawless when it comes to key programming. No i didn't need any adapters for the smart. You will see lights flickering thats normal don't get scared and stop the process
@user-tl5mc3bt3e it has a lot but i haven't been messing with them. The only down side of this machine is you get 3 years of free updates and after that you need to pay yearly i believe
Hi thanks for uploading video, Is there an all keys lost function/option? I seen on a comment on Schrodingers Box channel that a guy helped an elderly naibour with a lost key fob and saved them a fortune. that brought me to your channel searching👍 I cant think how it would be possible with a locked car and a lost key fob how he could possibly use. I assume the car would be locked? And if not possible with a locked car how would it be possible with an unlocked car but no key fobs?
I think if it would be fake I couldn't register the unit. It's registered and I have 3 years of free updates. But it worked to program key fobs with no problem so I'm assuming it's legit.
This video was very hard to keep up with. All the mumbling was very frustrating. The failure to read the instructions made this video unnecessarily long and convoluted. In the end it was good because it showed the device works. I appreciate the video and the work you put into it but it would be better with a little better planning. You are awesome though.
@@loosethehounds if no one ever gave me advice or told me the truth about my work i would never improve. If being honest hurts your feelings I'm sorry but if you come up from it, congratulations. If not, it's on you. If you can't accept a critique how do you know what to improve. Be blessed.
@@Coalcoman925 I think my car is having issues with the key proximity slot reader it's not detecting a key the current key turns on the car but if my battery dies on my keys I won't be able stick the fob in the key slot reader I have keyless smart key ... might have look at why the reader light is not on when I stick the fob jn maybe a fuse or maybe I need to replace something
back when he said "If it works we all watching, if it didn't oh well" Me: it is too intense. I'll close my eyes. 🤣😂🤣😂 🏌♂️🎆 I followed along on a D7 up until the scanning began. Just to see if the D7 has that car. 🥴😂🤣😂🤦🏾🏌♂️🎆
Great Video, Thanks, got the D7 so going to try myself. You clearly stated unboxing in beginning so exactly what you’d go through. Not pre planed cutting out all the real thought process you actually go through, so while yes a bit slow but very helpful.
Thanks
Thanks for video. Would like to see more cars done key programming with d7 :)
Gonna buy it myself, have xtool a30m now :)
Will do. Subscribe for new videos
Good video Aristeo. Gracia my friend.
You're welcome. Please subscribe 🙏
WOW!
Good Job
I have that machine but never tried .Tomorrow, i will thanks
It's a good key programmer
What machine did you cut the key with?
Do you need to pay a subscription to use the XTOOL D7? Is there any requirements Or can anyone buy it and just use it? Cheers mate great video you gained a sub 👌
When you buy it they give you 3 years free subscription but after that you will have to pay
are these keys cheap ones that you can get on ebay? or are they pre programmed genuine ones? aka do these keys need the chips programming before or just this step with x tool?
thanks!
Yea. I bought them on ebay for around 25 dollars. You need to cut the key and program them with your xtool
Hows the machine doing also did you need any adapters to make it work with a smart car?
Its been flawless when it comes to key programming. No i didn't need any adapters for the smart. You will see lights flickering thats normal don't get scared and stop the process
Any other special features that worked well?
@user-tl5mc3bt3e it has a lot but i haven't been messing with them. The only down side of this machine is you get 3 years of free updates and after that you need to pay yearly i believe
Did you do a video of you cutting the key?
Yes it's on the channel
Can the xtool d7 or d8 remove Audi component protection?
I haven't tried doing that. Not sure.
maybe - I hope it's not a fake, I heard they are out there.- best to call the company and find out
Work on 2023 Ford F150?
Most likely it should. You might ask the dealer before you buy it.
You need wifi and update it to newer version firmware
i just got mine and updated but mine looked different then this one.. had 102 updates
Do you need original key in order to program a new one?
Yes thats how I did it. Maybe you can do it by using the all keys lost option. I'm not sure.
@@Coalcoman925 thnx
Hi thanks for uploading video, Is there an all keys lost function/option? I seen on a comment on Schrodingers Box channel that a guy helped an elderly naibour with a lost key fob and saved them a fortune. that brought me to your channel searching👍
I cant think how it would be possible with a locked car and a lost key fob how he could possibly use. I assume the car would be locked? And if not possible with a locked car how would it be possible with an unlocked car but no key fobs?
How come your xtool D7 only has 7 icons on the bottom of the screen where others have 9 ?
Maybe thats how the new version are! Not really sure. Didn't really pay attention to that. Thanks for bringing that up.
I think if it would be fake I couldn't register the unit. It's registered and I have 3 years of free updates. But it worked to program key fobs with no problem so I'm assuming it's legit.
I contacted the dealer and they said the newer versions are like that. They come in black cases too instead of red.
How do i charge my x-tool d7 when the battery is low
It comes with a charger to charge it
This video was very hard to keep up with. All the mumbling was very frustrating. The failure to read the instructions made this video unnecessarily long and convoluted. In the end it was good because it showed the device works. I appreciate the video and the work you put into it but it would be better with a little better planning. You are awesome though.
Rude much
@@loosethehounds if no one ever gave me advice or told me the truth about my work i would never improve. If being honest hurts your feelings I'm sorry but if you come up from it, congratulations. If not, it's on you. If you can't accept a critique how do you know what to improve. Be blessed.
Does the x tool d7 come with a low battery or it's a fault cause mine is refusing to charge
Hopefully i dont mess up the car 😂
I know right...! I was thinking the same thing when I was doing it. Lol
@@Coalcoman925 I'm doing it carefully watching alot of tutorials before I try it
@@OLIVER949OC2 just so you know the dashboard of your car will be making some noises and lights will be flickering. Thats normal
@@Coalcoman925 I think my car is having issues with the key proximity slot reader it's not detecting a key the current key turns on the car but if my battery dies on my keys I won't be able stick the fob in the key slot reader I have keyless smart key ... might have look at why the reader light is not on when I stick the fob jn maybe a fuse or maybe I need to replace something
@@OLIVER949OC2 could be. Yea well do some research and go from there. Subscribe
Please learn how to use the tool BEFORE trying to show everyone how to use it !
Whats the fun in that! Lol i go as I'm learning. If i mess up o well lol. God bless
back when he said
"If it works we all watching, if it didn't oh well"
Me: it is too intense. I'll close my eyes. 🤣😂🤣😂 🏌♂️🎆
I followed along on a D7 up until the scanning began. Just to see if the D7 has that car. 🥴😂🤣😂🤦🏾🏌♂️🎆
Lol. Everything worked as plan. The car starts to make all this kind of noises and lights turning off and on but it works. Thank God. 😂
Nice.🏌♂️🎆
What machine did you cut the key with?
I have a video on that too. Check it out