Cobra 2000GTL restoration and Channel King board install. Sneak peak of Signalcrafters wattmeter.
HTML-код
- Опубликовано: 15 окт 2024
- To help support this channel donations can be made at. / mikesradiorepair or through PayPal at paypal.me/MikesRadioRepair
Never ask a truck stop tech to peak you power! If you need more power buy a Amp. This happen to me... it sounded like a sloppy mess on several frequencies. These radios are set for maximum power output (safe) from factory for a reason. Thanks Mike for fixing my problems.
I'm grateful for your videos. They're a total electronics school! You have an ardent student here!! I've been a radio enthusiast for over 40 years and I'm wanting to do this full time when I retire. It's like the life I've always wanted and you're setting me up very well. Thank you!
its great ti see one of the restored and you found what was wrong with freak counter fixed.
I’ve had a couple vintage Sansui’s on my bench lately. GLUE!!!!!! The crusty corrosive goo.
Outstanding repair. Having the parts is the key. I have a spare crystal for a Clegg Venus that is very hard to find.
Only complaint I might have about the wattmeter is the use of RCA connectors. I see that the sensor is bolted to the back panel which is good and you're probably not going to be changing it often. Reminds me of what Heathkit (and Collins as I recall) used for RF and interconnects. I had to replace the entire strip of RCA jacks on the back of my Drake R-4C receiver years ago because they got dodgy as even the ceramic interior insulator material will degrade over time, especially with repetitive mechanical insertions/removals. Thanks for sharing Mike, good radio fix as usual.
I always despised the rca antenna jack on my old heathkit hw101. Changed it to so239.
Back in the day, we used to put the MB-8719 PLL chip in place of the 8734 and then you could make the address pins go below channel one and into the 10 meter band.
Rich B. Shh 😀
Jonathan-Emily Powell: 😁😂
The only difference was the MSB was unceremoniously deleted from the 34.
give you a giggle i had one stuck that way. sprayed it wd-forty
Wow, randomly looking at 2000gtl videos and found yours. Just posted 21 minutes ago.. crazy.. I recently acquired my father's 2000, he bought it in early 90s. It has some mods and dings on it.. I want to restore it, it all works perfect, except I don't need the mods as I'm a ham and have radios for that. I want to restore to factory eventually, however I'd like to fix the ugly holes in the bezel first, any idea where I can get a front bezel? Once I make it better looking ill remove all the mods if possible..
I have a Drake Receiver . it needs work. I wish you were around here I would have you work on it. it just stops on the freak counter there is probably more wrong. parts might be a problem. I also have a am one which is a boat anchor. my house got hit by a lighting strike and it got fried. it was just am. where the i bought later had am and side band.
Hi, I have Cobra 2000 GTL I would like to get a Channel King board install. Would you have time to do it ? what would it cost and how much time would it take? Thanks
Amplitude and intermediate , frequency amplifiers . The final is called the rf amplifier . Rf is radio frequency amplifier .
hay mike my channel board is broken on my cobra 2000. but i can't find any do you have some . I am just looking for the old one i removed the ex cannle .
OK it's been a loooong time but if mem serves the 2000 and 148 were the same radio and I THINK the original President Washington as well? (before Uniden ruined it) It may have been the Madison or Grant. On the vco coupling transformer in the counter I seem to remember they had a frequency that you just peaked it to but it could work better to just go for equal db down at 1 and 40. Seems like you had to do it that way if you expanded the PLL. I was never an authoritative cb tech.
i have moms cobra 2000 gtl from the late 70s pr early 80s the channel display glows when i turn it off and needs recapped,is this something you would take care of for me? mom has been gone 10 years in oct plus it hasnt been used sence the 90s,just for a ball park figure what would you charge to fix this she was pickey when it came to her radio
I had one. it got stolen. It had my f and m carved in the back. its probably in the junk yard. mine had upper channels in it . I had him to go up. not down.
Looks pretty .
What about the update service update put out by Cobra. I thought it was a change to prevent this chip from blowing?
4:16! LOL, vintage dust. Perhaps you can bottle it and sell it like a fine wine.
what cleaner/lube do you use on the switches and selectors??
Nice
Hey Mike, can you please do a video on one of the external/built in amp's like the RFX-150. Are they worth the effort?
None of the RFX amplifiers are made any more as far as I'm aware.
Too bad. An internal amp seemed like a neat idea if done right. Thanks.
@@mikesradiorepair how much channel king board I got a 2000GTL
Does it need calibration and alignment?
Mike, I am curious. You seem to do a lot of rework on radios that have been butched. Why the decline in quality work and is it because the push to make money causes rush jobs and short cuts or is technical ability just declining?
It's all about what the customer is willing to pay, often the Labour charge on a big job outweighs the cost of replacing the radio or piece of equipment.
Things are made much cheaper today because they are expected to be upgraded, replaced more often, not such the case 30 or 40 years ago when a basic tv cost the equivalent of about 1000 bucks in today's money.
A new Homebase 40 channel c.b radio in 1980 cost the equivalent of a basic HF set today in real terms.
I could go out and buy a 26-30mhz anytone all mode, frequency and channel display, built in swr meter, echo Mic, 40 watts out the back, no drifting, for less than 250 bucks today.
Or I could pay 250 bucks to have a big repair job done on a cobra 2000, the cobra 2000 probably cost the equivalent of 600 or 700 bucks back when it was new
I've heard of people paying over $1000 to have a cobra 2000 restored. Unbelievable but it's what they want.
Cool .
Did they use that lead free solder ,which is crap.good radio had one,but I like my Tram better.
Have you tryed a sinal generator , trace .
How can i get a radio to you for repair it's a president Madison no receive just fuzz and very week tx used to be very strong but been in storage for 10 years, it's has a ton of mods the guy that built it up died. Please help
To email me just add @gmail.com to my youtube user ID.
What’s the address I should send my radio for repair to???
It also looks like something got smoked on the freq counter .
6:40. How do you tell if the clarifier is locked?
Your transmitted signal will not change if it's locked If it's unlocked, the receive and transmit will be unison
nice, how do we buy the channel kit please
Operate it and find out for your self . Sometimes the owner doesn't know what he's talking about .
on that custom programmed rom, it should be possible (at least i would believe) to take a working one pull the programming off of it, and install it into a new blank chip if you can still get one or at least a working replacement.
felo tools are becoming popular
What about taking the radio outside and blowing the dust off with compressed air?
You have to be careful with compressed air, it contains moisture. If using canned air the CO2 can cause problems on open boards.
Cuanto vale el cobra 2000 GTL
I don't have an ociloscope
Um , yeah well some frequency s have been re assigned . To cell phones .
La mía no prende