I’ve done numerous German sets like this one, and it really sounds like an alignment issue. You could do a simple alignment by feeding a 10.7MHz unmodulated carrier via a couple of turns of wire over the ecc85, and max the voltage level across the detector cap. Just tweak the cores prior to the last one (the extra sensitive bugger) for max negative voltage across the cap. I then just tweak the final one to null out the detector by ear for least distortion. If you find that this improves the sound then you can do the full alignment process as described in the service manual, which, I agree with you, can be a pain. Good luck. I really enjoy your work. PS: they actually suggest that you do an alignment after every change of the ecc85 because it does throw out the alignment by simply putting in a new tube, so the front end is really sensitive to everything you change there.
At this point I ask myself why I restore tube radios. 99% of "music" they receieve is trash anyways. Thats like being resurrected from the dead to become a Kardashian
I feel you. Consider adding Bluetooth to the input. That lets you stream your favorite content from your device in beautiful vacuum tube sound. www.amazon.com/Sure-Electronics-Bluetooth-Receiver-Wireless/dp/B00KMTOK0A/ref=sr_1_2?ie=UTF8&qid=1545089946&sr=8-2&keywords=sure+electronics+bluetooth
Blibby blur blur, blibby blur blur - laughed till I couldent catch my breath. Gasp! Awsome vid, thanks for sharing. Still believe Shango066 for President, vote here.
With the crap that passes for music the past few years, I'm not sure I want to repair radios. It's all "vizza voom giga boom drank smoke" no matter what genre.
It is for the better, in my opinion, that "I drink 'till I'm drunk. I smoke 'till I'm high...You know I'm super-fly," is not on AM. Bleh bleh bleh bleh bleh bleh bleh.
Sounds like the discriminator needs a slight touch up' Like you mention if you go tweaking those cores, something may break loose. Maybe you can check for zero volts at the balance point, it may be dead on. I always remember your alignment video of a cheap transistor radio and how much the distortion was minimized when done. Keep at it, Dan, you can do it!
Time for the release of the 2018 shango066 rap video, "Shux my Nordmende needs bucks, gonna holla so it gets a dolla.". BTW my 1990 Dodge van's service manual says to coat the engine computers plug and socket with lithium grease .Looking forward to part III...
Shango you could do an alignment with a 6LB sledgehammer, this radio will then allow you to listen to people on the astra satellites, beaming down mind numbing spirit crushing gameshows whilst theyre stuffing junkfood in their mouths. Choose your future, choose Life.
The stereo effect is also enhanced a lot when the external speakers are plugged in. Grundig sets had similar layouts with bass speakers in the front next to each other, and tweeters at the sides of the cabinet + external mid range speakers, values were often 5 Ohms.
Loewe-Opta made one model of table radio, the Hellas 2841W, which had two front-firing woofers, two side mounted midrange speakers and a horn tweeter which radiated out both sides of the cabinet. It also had separate amplification for the woofers.
Major takeaway from this video: today's radio sucks. My hat off to you though for working on what looks like a nightmare to repair. Learned a lot from this video.
from somebody who is very passionate with electronic field and how it works and how to repair I can really appreciate the detail that you put into your videos although I would like to see more repairs in details on other certain amateur radio equipment vintage and rare situations however I do use your videos as in Elmer for certain Electronics thank you for your videos
You’d like to think the alignment won’t be off, and from what I hear about these German radios, it usually isn’t. But... The same person who packed the tube sockets with lithium grease, may have also started tweaking on the adjustment slugs, with no more equipment than the screwdriver with the broken tip in their hand.
I recently had a problem on a similar vintage Philips radio with the same tube lineup minus the separate output tubes. It picked out all the stations, but the volume was very low and the eye tube didn't move at all. Both on FM and AM. I found a problem by measuring the voltages on the IF tubes, g2 voltage on the one of the IF tube (EF85/6BY7) was only 2V. Caused by a shorted bypass polyester capacitor to ground. Replaced it, and now it picks up stations even without any antenna. Also the first time I saw that type of capacitor to short.
30:56 A Hungarian Tungsram tube from about 1970-1985 installed in a 1963 vintage German set in the US in 2018... Nice :) . Have you bought that tube directly from Hungary, or from a third country? Good to know that good ol' Hungarian tech spreading across the world thanks to ebay :) . Greetings from Hungary, and have a happy Holiday! P.S. In Hungarian AM-FM radios, the IF tubes were usually ECH81 and EBF89, the only example I found in a hurry is the Orion AR604, which has EF89 in the IF.
Props for the input from Hungary. Never had the chance to visit, but have known quite a few people from there and seen many photos. Beautiful country with a rich history. Good, solid, friendly, no-nonsense people. While growing up the neighbor taught my mother how to make Paprikas and kifli, to name just 2 things. God bless her for that. Yummmm. :) I would love to visit some day. Happy Holiday from Ohio, US.
My Scott 320 tuner had very similar symptoms. It didn't have as weak sensitivity, but the audio was distorted like that. I found an old Scott tuner document that gave the basics on how to align it. Using that, going off the eye tube, and by ear, I was able to get the Scott pretty much dead on. What appeared to really clean up the distortion was what I believe to be the discriminator slug. I found when I was tuned to the strongest station, I was able to tweak it until I found the sweat spot and the audio was perfect. What I found interesting is with the discriminator dead centered on the scope, it appeared to be off when listening to it on a very strong station.
At 30:46 For a while, to listen to Shortwave was all we could do We were young and Shango knew, and our eyes were alive Deep inside we knew our Shortwave was true For a while we paid no mind to the past We knew the Shortwave would last Every night somethin' right Would invite us to begin the dance Somethin' happened along the way What used to be happy was sad Somethin' happened along the way And yesterday was all we had Oh, after the Shortwave has gone How could you lead me one And not let me stay around? Oh, after the Shortwave has gone What used to be right is wrong Can Shortwave that's lost be found? For a while to listen to Shortwave whit each other With all we would ever need Shortwave was strong for so long Never knew that what was wrong Shango was right We tried to find what we had Til sadness was Shango shared We were scared this affair Would lead our Shortwave into Somethin' happened along the way Yesterday was all we had Somethin' happened along the way What used to be happy is sad Somethin' happened along the way What used to be was all we had Oh, after the Shortwave has gone How could you lead me on And not let me stay around? Oh, oh, after the Shortwave has gone What used to be right is wrong Can Shortwave that's lost be found? Oh, oh, after the Shortwave has gone What used to be right is wrong Can Shortwave that's lost be found Oh, oh, after the Shortwave has gone
I'll try that again. The tuner socket looks suss and the other socket with all that white crap in it, needs to be cleaned or replaced. My mum has an old Kriesler radio gram (we live in Victoria Australia) AM only but with a decent antenna connected there was always a slight gap even on the strongest stations. It is a stereo 3 way unit with electrostatic tweeters and sounded great in its hey day. I never pegged the tuner seeing eye valve no matter what station you tuned in. It measured the strength and the closest I got was about 1 cm on the strongest channel. I wouldn't worry about that. Worry about the distortion and forget the seeing eye valve. Cheers from down under. Andrew.
I am genuinely intrigued by this set. These consoles are rather hard to find I’ve realized. I was offered a really large telefunken once but that offer never came to surface. Thanks for these great videos!!
Hahahah ! love your phone chat with the library lady survey. and then the blahblahblehblehbleblebleehbleh ! lol. mumble. Tube sound is so nice and warm.
I have to buy one of these older radios, but with a better FM stage....the Zenith with the pre-War & post-War FM bands just looks cool to me...I saw one console with a wire recorder from 1947 on RUclips, I'd want that just for the novelty, maybe get some of those wire spools, play around with it.
I've seen those tubular ceramic capacitors in old Japanese dollar store radios. I didn't even touch them in the one I have; actually I only replaced one capacitor in the whole thing and that was a tiny paper capacitor across the second IF coil which I replaced with a poly one.
All you need is a big screen room with sealed doors etc with your test equipment and you inside, no external interference. I don't know how many $$$; I have worked in one years ago)
9:50 First time in 40 years the FM works and what comes out? "Wake Up In The Sky" by Gucci Mane (You can't tell me I ain't fly (you can't tell me I ain't fly) I know I'm super fly (I know), I know I'm super fly (I know) The ladies love the luxury (yeah), ) lol 20:40 There is that song again, that must pretty popular in LA
This is probably a stretch but. have you tested the EM84 to make sure the eye actually closes? I came across a replacement one a few years back where the eye didn't close all the way at the proper voltage
To get rid of the distortion I'd do a full alignment, also I had to slightly detune the FM IF for a wider passband to get rid of the distortion on strong stations. If you have a sweep oscillator it's best done visually to get a flat passband. (or as you said, stagger tuned)
1995VoyagerES Local electronics stores don't exist in the vast majority of the US any more either. I'm thinking the only thing that keeps that alive in the LA area is the combined presence of TV studios and Hollywood. Lots of old electronics in those places. Here in the Seattle area, I was at Fry's and saw a station engineer for a local FM radio station buying capacitor assortments. I asked why, and he said to keep old gear going.
If the limiter stages in the IF are not going into saturation and letting amplitude variations through to the detector, the ratio detector can interpret that as distortion. It is also possible that the IF alignment is off. The only real way to sort it out is with a signal generator and a distortion analyzer. All my knowledge of this stuff related to solid state equipment, but the same principles apply. I'm sure someone with more knowledge of vintage tube IF's will chime in and hopefully enlighten us all. I do agree though, it seems like a lack of gain issue to me as well.
I don't know much about FM, but it sounds like there's some overloading going on. In an AM radio, if AVC/AGC isn't working right it will blast the detector---that's something that could be checked easily enough with voltage measurements
Shango, I am no expert I have a feeling that the problem is in the tuner maybe you should try impedance matching the antenna, try a bunny ear w/gain boost or something, what about that cap you changed in the tuner, could a 150-500pf trimmer be substituted? What do you think cause the failure in that cap? Maybe there are more bad ones in there. I hope you don't think I am trying to confuse you, but I am getting frustrated too, I can just imagine what you're feeling.
Shango do these old radios have something like, a "squelch" circuit ? I was wondering why there was no static between stations, and then you mentioned it ! I'm thinking back to the days we all had CB radios in our trucks..lol. They were fun ! Like having a cell phone party line.lol
I've used lithium grease as heat-sink compound but sealed up and not in electronics and not at those temperatures!!! When you build an air conditioner out of a de-humidifier and have to water cool the compressor...
yeah shango, you need to take refresher courses in inclusion - and to study your toxic male masculinity, white privilage, etc. open up a safe room for the snowflakes with puppies and teddy bears. and while your doing that, open your borders. challenge your perception of music, shango. I mean, every group can't be rush
at 16:25, why have a resistor or capacitor with a coil wrapped around it? I have seen this before in other valve radios, but never found out the reason for it. Thank you for any replies... Ian.
Is there more to my thought of that Tube in back being 'loose' - it's too loose? - it's mentioned and does send 'static' [?] each time touched. =\ Dowse with Jive - *Super Fly~zzd.* No one only thinks needles hide in hay stacks, do they? ssh - i'm still Learning To Think! * Cheers!
That capacitor that you checked in the F.M. Demodulator and called a Stabiliser is actually the A.M. Limiting Capacitor isn't it?Also when I've heard him over here on the radio in Britain Alex Jones has always been interesting listening.Such as questioning the merits of what is being put in our drinking water for example.
Maybe my mind was scrambled by the high quality music received but I only recall seeing one output transformer, near the EL84s where is the other one? It might have been shown when I made a cuppa T? PS. Now every record is made with zero dynamic range and 110% modulation, that's probably how the music SHOULD sound. Cynical?? what me??
At the time this radio hit the market Germany only used frequencies up to 100 MHz for FM. Since this radio goes up to 108 MHz I think that they also took care of the de-emphasis.
@@DasMrOSi I have a zero to one watt FM transmitter that I can, with the push of a button, change the pre-emphasis I think from 50 to 75µs. When I change the pre-emphasis on the transmitter, I cannot hear the difference? Maybe its because it is an inexpensive boombox? Another thing that seems to have gone away is the Stereo signal pilot light? Maybe not too soon to disappear, will be analog signal on the FM band? A lot of foreign countries have already pulled the plug. I say "Not too soon" because of the heavy use of FM in vehicles in this country. (USA that is:)
@@Captionmarvelous The change in deemphasis should result in a bit more or less treble, most noticable in "s" sounds. Germany is also slowly working on pulling the plug on analog FM. We now got a service that's called "DAB+", it's digital an powered by the AACv2 Codec. One transponder could create a stream with up to 224kbps. The problem is: To save costs they cramp as many radio stations into that steam as possible, resulting in music station having to work with 48 kbps. The reception is awesome, but I can't listen to it for more than 10 minutes. Dynamic is lost, stereo separation suffers, and artifacts all over the place.
20:45 i just shazamed that song it wake up in the sky by Gucci mane Bruno Mars and kodak black and im pretty sure google can content match a pretty shitty sounding audio but Shazam is owned by apple
I’ve done numerous German sets like this one, and it really sounds like an alignment issue. You could do a simple alignment by feeding a 10.7MHz unmodulated carrier via a couple of turns of wire over the ecc85, and max the voltage level across the detector cap. Just tweak the cores prior to the last one (the extra sensitive bugger) for max negative voltage across the cap. I then just tweak the final one to null out the detector by ear for least distortion. If you find that this improves the sound then you can do the full alignment process as described in the service manual, which, I agree with you, can be a pain. Good luck. I really enjoy your work.
PS: they actually suggest that you do an alignment after every change of the ecc85 because it does throw out the alignment by simply putting in a new tube, so the front end is really sensitive to everything you change there.
At this point I ask myself why I restore tube radios. 99% of "music" they receieve is trash anyways. Thats like being resurrected from the dead to become a Kardashian
I feel you. Consider adding Bluetooth to the input. That lets you stream your favorite content from your device in beautiful vacuum tube sound. www.amazon.com/Sure-Electronics-Bluetooth-Receiver-Wireless/dp/B00KMTOK0A/ref=sr_1_2?ie=UTF8&qid=1545089946&sr=8-2&keywords=sure+electronics+bluetooth
LOL, LOL
Build or buy a pocket transmitter and listen to your own stuff.
22:32 The first time I’ve ever seen someone pull out a tube to make the music sound better!
I almost spit my soda out laughing great one man!
Blibby blur blur, blibby blur blur - laughed till I couldent catch my breath. Gasp! Awsome vid, thanks for sharing. Still believe Shango066 for President, vote here.
Only 2 votes for president, come on lads and lasses
Aw! Only 22 votes for president, should be 1000's. Hey where is the respect for the all repairing guru.
ISO Guy same
It's OK to be white. MAGA
If she was a good person to tell me that i
bidi bidi bidi bidi bi.
OMG, I just lost it!
Shango"SuperFly"066, my new favorite mumble rapper!
I have every confidence you will get this gem from Germany up to speed and be the proud performer it once was.
With the crap that passes for music the past few years, I'm not sure I want to repair radios. It's all "vizza voom giga boom drank smoke" no matter what genre.
I gave up NEW music when Punk came in, nothing wrong with being a silly old fart!!
I can’t tell the difference between the country and the R&B station anymore! If I didn’t have SiriusXM I’d go insane..
Michael Beeny At least punks knew how to play three chords! The “artists” today just mumble into a microphone and let Autotune do the rest..
It is for the better, in my opinion, that "I drink 'till I'm drunk. I smoke 'till I'm high...You know I'm super-fly," is not on AM. Bleh bleh bleh bleh bleh bleh bleh.
25:29 "full on trailer taliban" lol
Yellow vest, nationalist, whatever The Branding is at this moment
I swear to god that if you give shango enough time he will fix a tube radio with just a hammer.
Sounds like the discriminator needs a slight touch up' Like you mention if you go tweaking those cores, something may break loose. Maybe you can check for zero volts at the balance point, it may be dead on. I always remember your alignment video of a cheap transistor radio and how much the distortion was minimized when done. Keep at it, Dan, you can do it!
Nordmende sets are the best.. great video thanks
Excited for part 3!
Probably not many 20 year olds interested in this kind of stuff, but I sure am.
Time for the release of the 2018 shango066 rap video, "Shux my Nordmende needs bucks, gonna holla so it gets a dolla.". BTW my 1990 Dodge van's service manual says to coat the engine computers plug and socket with lithium grease .Looking forward to part III...
Shango you could do an alignment with a 6LB sledgehammer, this radio will then allow you to listen to people on the astra satellites, beaming down mind numbing spirit crushing gameshows whilst theyre stuffing junkfood in their mouths. Choose your future, choose Life.
Please do include more unsolicited solicitation calls, its absolutely hysterical how you handle them.
I got a free box of old tubes! Can’t wait to possibly use them If I get a old radio
Is Alex Jones still trying to sell detoxifying tea on shortwave? Haha
Arthur Godfrey sold salada Lipton tea. Now that was RAAADEEEEEEEOOOOOOO!
@Al Bore "It's not just good, it's SALADA good!"
The stereo effect is also enhanced a lot when the external speakers are plugged in. Grundig sets had similar layouts with bass speakers in the front next to each other, and tweeters at the sides of the cabinet + external mid range speakers, values were often 5 Ohms.
Loewe-Opta made one model of table radio, the Hellas 2841W, which had two front-firing woofers, two side mounted midrange speakers and a horn tweeter which radiated out both sides of the cabinet. It also had separate amplification for the woofers.
Major takeaway from this video: today's radio sucks. My hat off to you though for working on what looks like a nightmare to repair. Learned a lot from this video.
I always get excited when you come out with another video love your channel HR&L
Another one of those funny goofy phone calls nice 😆
Coming along nicely Shango. That's a nice console too, fully featured yet compact.
I WANT PART THREE FOR XMAS
Sal khan Shango Bells, Shango Bells, Shango all the way...
I'm watching this on Xmas
from somebody who is very passionate with electronic field and how it works and how to repair I can really appreciate the detail that you put into your videos although I would like to see more repairs in details on other certain amateur radio equipment vintage and rare situations however I do use your videos as in Elmer for certain Electronics thank you for your videos
You’d like to think the alignment won’t be off, and from what I hear about these German radios, it usually isn’t. But... The same person who packed the tube sockets with lithium grease, may have also started tweaking on the adjustment slugs, with no more equipment than the screwdriver with the broken tip in their hand.
I recently had a problem on a similar vintage Philips radio with the same tube lineup minus the separate output tubes. It picked out all the stations, but the volume was very low and the eye tube didn't move at all. Both on FM and AM. I found a problem by measuring the voltages on the IF tubes, g2 voltage on the one of the IF tube (EF85/6BY7) was only 2V. Caused by a shorted bypass polyester capacitor to ground. Replaced it, and now it picks up stations even without any antenna. Also the first time I saw that type of capacitor to short.
I agree on that so called music ,I like your videos you are well versed on these old radios.
30:56 A Hungarian Tungsram tube from about 1970-1985 installed in a 1963 vintage German set in the US in 2018... Nice :) . Have you bought that tube directly from Hungary, or from a third country? Good to know that good ol' Hungarian tech spreading across the world thanks to ebay :) . Greetings from Hungary, and have a happy Holiday!
P.S. In Hungarian AM-FM radios, the IF tubes were usually ECH81 and EBF89, the only example I found in a hurry is the Orion AR604, which has EF89 in the IF.
Props for the input from Hungary. Never had the chance to visit, but have known quite a few people from there and seen many photos. Beautiful country with a rich history. Good, solid, friendly, no-nonsense people. While growing up the neighbor taught my mother how to make Paprikas and kifli, to name just 2 things. God bless her for that. Yummmm. :) I would love to visit some day. Happy Holiday from Ohio, US.
My Scott 320 tuner had very similar symptoms. It didn't have as weak sensitivity, but the audio was distorted like that. I found an old Scott tuner document that gave the basics on how to align it. Using that, going off the eye tube, and by ear, I was able to get the Scott pretty much dead on. What appeared to really clean up the distortion was what I believe to be the discriminator slug. I found when I was tuned to the strongest station, I was able to tweak it until I found the sweat spot and the audio was perfect. What I found interesting is with the discriminator dead centered on the scope, it appeared to be off when listening to it on a very strong station.
Love it, the strongest I've seen that jade green tuning eye close up and the tune was Jaded...
Damn it im still cracking up from the end of the last video
At 30:46
For a while, to listen to Shortwave was all we could do
We were young and Shango knew, and our eyes were alive
Deep inside we knew our Shortwave was true
For a while we paid no mind to the past
We knew the Shortwave would last
Every night somethin' right
Would invite us to begin the dance
Somethin' happened along the way
What used to be happy was sad
Somethin' happened along the way
And yesterday was all we had
Oh, after the Shortwave has gone
How could you lead me one
And not let me stay around?
Oh, after the Shortwave has gone
What used to be right is wrong
Can Shortwave that's lost be found?
For a while to listen to Shortwave whit each other
With all we would ever need
Shortwave was strong for so long
Never knew that what was wrong
Shango was right
We tried to find what we had
Til sadness was Shango shared
We were scared this affair
Would lead our Shortwave into
Somethin' happened along the way
Yesterday was all we had
Somethin' happened along the way
What used to be happy is sad
Somethin' happened along the way
What used to be was all we had
Oh, after the Shortwave has gone
How could you lead me on
And not let me stay around?
Oh, oh, after the Shortwave has gone
What used to be right is wrong
Can Shortwave that's lost be found?
Oh, oh, after the Shortwave has gone
What used to be right is wrong
Can Shortwave that's lost be found
Oh, oh, after the Shortwave has gone
I'll try that again. The tuner socket looks suss and the other socket with all that white crap in it, needs to be cleaned or replaced. My mum has an old Kriesler radio gram (we live in Victoria Australia) AM only but with a decent antenna connected there was always a slight gap even on the strongest stations. It is a stereo 3 way unit with electrostatic tweeters and sounded great in its hey day. I never pegged the tuner seeing eye valve no matter what station you tuned in. It measured the strength and the closest I got was about 1 cm on the strongest channel. I wouldn't worry about that. Worry about the distortion and forget the seeing eye valve. Cheers from down under. Andrew.
merry christmas shango you gave me a laugh
I am genuinely intrigued by this set.
These consoles are rather hard to find I’ve realized. I was offered a really large telefunken once but that offer never came to surface.
Thanks for these great videos!!
Hahahah ! love your phone chat with the library lady survey. and then the blahblahblehblehbleblebleehbleh ! lol. mumble. Tube sound is so nice and warm.
I have to buy one of these older radios, but with a better FM stage....the Zenith with the pre-War & post-War FM bands just looks cool to me...I saw one console with a wire recorder from 1947 on RUclips, I'd want that just for the novelty, maybe get some of those wire spools, play around with it.
Merry Christmas Shango!
Way to go Shing it's coming back around that thing is awesome I don't care what you say I would you still adopt it
Love the handling of cold call ..halarious ...good stuff
KRRL Real 92,3 ... the official FM test station for Shango066
FHF!!!! The best morning show in LA!!👍🏻Sounds pretty darn good....even distorted!
Life would be boring if no one was ever offended by anything.
9:43 What a reward for getting a 30+ year FM radio working lmao
34:47 There's the original Mumble Rap by Van Morrison (and if I remember correctly it features a transistor radio too).
25:05 I just came back to listen to that rap hahaha😆
Shango you and I have the same mindset man I love your Humor man I swear I think we can be brothers
Blibby blibby colud be the Number one next summer. Think about it. You must record that blibby song! Cheers
Actual real singing doesn't matter these days. If that bleeda blum bluzza boodle blabla will sell records, then the labels would be all for it.
I've seen those tubular ceramic capacitors in old Japanese dollar store radios. I didn't even touch them in the one I have; actually I only replaced one capacitor in the whole thing and that was a tiny paper capacitor across the second IF coil which I replaced with a poly one.
shango You know how to maintain suspense!
All you need is a big screen room with sealed doors etc with your test equipment and you inside, no external interference. I don't know how many $$$; I have worked in one years ago)
You are so amazing man hahahahaha
9:50 First time in 40 years the FM works and what comes out? "Wake Up In The Sky" by Gucci Mane (You can't tell me I ain't fly (you can't tell me I ain't fly) I know I'm super fly (I know), I know I'm super fly (I know) The ladies love the luxury (yeah), ) lol 20:40 There is that song again, that must pretty popular in LA
Joe Blow - My daughter always plays it & it drives me up the wall!
Played in LA-area on KRRL 92,3 , KPWR 105,9 , KGGI 99,1 , KQIE 104.7 , maybe KIIS 102,7
This is probably a stretch but. have you tested the EM84 to make sure the eye actually closes? I came across a replacement one a few years back where the eye didn't close all the way at the proper voltage
To get rid of the distortion I'd do a full alignment, also I had to slightly detune the FM IF for a wider passband to get rid of the distortion on strong stations. If you have a sweep oscillator it's best done visually to get a flat passband. (or as you said, stagger tuned)
I'm jealous that you have local electronic store(s) nearby...that just doesnt exist over here in germany, at least I dont know any.
1995VoyagerES Local electronics stores don't exist in the vast majority of the US any more either. I'm thinking the only thing that keeps that alive in the LA area is the combined presence of TV studios and Hollywood. Lots of old electronics in those places. Here in the Seattle area, I was at Fry's and saw a station engineer for a local FM radio station buying capacitor assortments. I asked why, and he said to keep old gear going.
Thanks for shareing
Man I would buy this thing
Awesome video! When does your mumble rap album drop?
it had a turntable too. 10 grams tracking force but mum got it when I was 8 years old.
If the limiter stages in the IF are not going into saturation and letting amplitude variations through to the detector, the ratio detector can interpret that as distortion. It is also possible that the IF alignment is off. The only real way to sort it out is with a signal generator and a distortion analyzer. All my knowledge of this stuff related to solid state equipment, but the same principles apply. I'm sure someone with more knowledge of vintage tube IF's will chime in and hopefully enlighten us all. I do agree though, it seems like a lack of gain issue to me as well.
I can't wait for part 3!!!, and Shango is right, to awaken after forty-plus years to crap that sounds worse than animal sacrifice, just isn't fair.
I don't know much about FM, but it sounds like there's some overloading going on. In an AM radio, if AVC/AGC isn't working right it will blast the detector---that's something that could be checked easily enough with voltage measurements
Happy Holidays then!
Shango, I am no expert I have a feeling that the problem is in the tuner maybe you should try impedance matching the antenna, try a bunny ear w/gain boost or something, what about that cap you changed in the tuner, could a 150-500pf trimmer be substituted? What do you think cause the failure in that cap? Maybe there are more bad ones in there. I hope you don't think I am trying to confuse you, but I am getting frustrated too, I can just imagine what you're feeling.
i struggle to get dab+ down where i live and kinda weak fm signals depends where its placed
Shango do these old radios have something like, a "squelch" circuit ? I was wondering why there was no static between stations, and then you mentioned it ! I'm thinking back to the days we all had CB radios in our trucks..lol. They were fun ! Like having a cell phone party line.lol
I need the dolaz babe babe babe babe
I heard a reference to "Asperger's Syndrome people" in there. Go Aspergerians !
I've used lithium grease as heat-sink compound but sealed up and not in electronics and not at those temperatures!!! When you build an air conditioner out of a de-humidifier and have to water cool the compressor...
6T8 = triple diode, hi mu triode. AM and FM detectors, AGC, and first AF amp (or maybe part of the phase inverter).
yeah shango, you need to take refresher courses in inclusion - and to study your toxic male masculinity, white privilage, etc. open up a safe room for the snowflakes with puppies and teddy bears. and while your doing that, open your borders. challenge your perception of music, shango. I mean, every group can't be rush
Yeah, Shango066 needs to get himself woke !
@@SeanDamonGreene Fo realz! Lol
good job
fm distortion could be bad discriminator electrolytic, or the 2 discriminator diode sections in the eabc80 too different in emission...
love mumble rap works nice as a background lol great video thnx.
Oh I need the Dallas. Bly bliu bli blri
at 16:25, why have a resistor or capacitor with a coil wrapped around it?
I have seen this before in other valve radios, but never found out the reason for it.
Thank you for any replies... Ian.
The old saying is that you can't make honey out of dog poo but I believe you can, tnx for the laffs.
NIB 6T8A / EABC80 / 6AK8 Vacuum Tube you are right
Is there more to my thought of that Tube in back being 'loose' - it's too loose? - it's mentioned and does send 'static' [?] each time touched. =\
Dowse with Jive - *Super Fly~zzd.* No one only thinks needles hide in hay stacks, do they? ssh - i'm still Learning To Think! * Cheers!
1:45 - Maybe he was using it as heat-sink compound!
I think the distortion was the radio trying to go back into a coma after hearing that "music"
That capacitor that you checked in the F.M. Demodulator and called a Stabiliser is actually the A.M. Limiting Capacitor isn't it?Also when I've heard him over here on the radio in Britain Alex Jones has always been interesting listening.Such as questioning the merits of what is being put in our drinking water for example.
Would be a neat little console if totally restored.
Maybe my mind was scrambled by the high quality music received but I only recall seeing one output transformer, near the EL84s where is the other one? It might have been shown when I made a cuppa T?
PS. Now every record is made with zero dynamic range and 110% modulation, that's probably how the music SHOULD sound. Cynical?? what me??
Distortion in the bass reminds me of the power supply sag effect that one observes in guitar amps. Is the rectifier in spec?
Seen that before. Crank the volume and you'll see the hot spot on the plate
Reward for Part 2: Shango066 is Super Fly and supports California library education, mumble rap and laments trailer Taliban.
40:25 - It sounds like the AGC isn't working. Large signals overload the FM demodulator!
I've seen people pack grease in electronics way too much, it's such a pain to clean up.
yep. that capacitor definitely seems bulged.
I wonder if they have adjusted the FM pre-emphasis for the US market since it is a German radio?
At the time this radio hit the market Germany only used frequencies up to 100 MHz for FM.
Since this radio goes up to 108 MHz I think that they also took care of the de-emphasis.
@@DasMrOSi I have a zero to one watt FM transmitter that I can, with the push of a button, change the pre-emphasis I think from 50 to 75µs. When I change the pre-emphasis on the transmitter, I cannot hear the difference? Maybe its because it is an inexpensive boombox? Another thing that seems to have gone away is the Stereo signal pilot light? Maybe not too soon to disappear, will be analog signal on the FM band? A lot of foreign countries have already pulled the plug. I say "Not too soon" because of the heavy use of FM in vehicles in this country. (USA that is:)
@@Captionmarvelous The change in deemphasis should result in a bit more or less treble, most noticable in "s" sounds.
Germany is also slowly working on pulling the plug on analog FM.
We now got a service that's called "DAB+", it's digital an powered by the AACv2 Codec.
One transponder could create a stream with up to 224kbps.
The problem is: To save costs they cramp as many radio stations into that steam as possible, resulting in music station having to work with 48 kbps.
The reception is awesome, but I can't listen to it for more than 10 minutes.
Dynamic is lost, stereo separation suffers, and artifacts all over the place.
Super fly
KLOS ?What year did you record this.🔌
20:45 i just shazamed that song it wake up in the sky by Gucci mane Bruno Mars and kodak black and im pretty sure google can content match a pretty shitty sounding audio but Shazam is owned by apple
Re: China tester accuracy... hold the test button down 10 seconds and they go into calibration mode
Aren't the eye tube connected to your AVC line ?
Ooh, if YT knew you were waving Vishay's yellow diddler round on your channel you'd be banned for life... lol
20:52 was an awesome comment... but that's what happens with an FM tuner on KRRL
Spray DW-4O all over the trimers on fm and am and everything works again perfect
Where do you buy your russian tubes by the lot?