I installed the tx03 in my granddaughters whoop. Very happy with the range and image quality. The tx06 with the price of $13.99 is a great value. Thanks Albert
Not bad for the price and as a replacement. If your willing/able to change the canopy I like the Boldclash F02H Pro for 21$ up to 200mw w smart audio and canopy is solid. Only thing is angle might not be enough for some freestyle pilots.
In the video you said you only need one ground, what do you do with the extra ground? It seems to be working when I soldered everything except for 1 ground
Al, does soldering both negative wires effect anything in a bad way? In the video here you said that you just do one of the negative wires when using the audio... Thanks bro!!!
I would like to put a camera on a Syma X5C before buying a racing drone. I have thought to buy Eachine VR D3 glasses and a camera with VTX. I think the newest is the Eachine TX02Pro. There is little difference in price. What do you recommend? I have not looked at other brands and I do not know if there is something better for that price. Thank you.
Can I desolder the vtx from the camera ? Since I get an osd and the channel is transmitted but the picture is dark. This would mean the camera isn't getting any supply voltage but since the vtx is working I would want to use it elsewhere :)
camera preference is very subjective and also what you see in DVR is gonna be a little different in the goggles. I personally can't tell the difference between the cameras but other people will say one is terrible over the other. It's completely subjective.
mine is not working, i have black video, i hooked everything right... is it a problem that i hooked the 2 ground cables together to the same ground pad?
@@AlbertKimTV I have seperated it and when just adding a 1s battery with 3,8v or something the vtx leds arent lighting up. Could this be that some electronic are on the camera??
hi, I hv the camera but when i connect the video to the FC the OSD doesn't show up on the feed.When i disconnct only the video from the camera i can see the OSD with a black feed.(when i connect the video it kind of overlays the video over the OSD. Does anyone know a solution?I am using the ur65
@@AlbertKimTV Are you sure?I wanna start on fpv drones,and im a student so i dont have a lot of budget,it would really suck if it wont be compatible,Ive searched online and no forum or topic about this exists.
It could have been a better vid if you had shown the rest of the installation. I'm just a noob to hobby drones though, so I'm looking for more of the 102 or 201 level. Otherwise, big thanks for the vid, it is a thumbs up!!
@@yolofpv2936 I figured it out.. the front of the manual states... (#1)Super Mini 5.8Ghz 48CH FPV Transmitter + (#2)700TVL PFV Camera + (#3)Brass Dipole Antenna + (#4)OSD
I installed the tx03 in my granddaughters whoop. Very happy with the range and image quality. The tx06 with the price of $13.99 is a great value. Thanks Albert
Looks freaking awesome! Looked like it has really good range and crystal clear video! Nice review A.K.!
Wow beautiful neighborhood. Can I ask what city and state you’re from? I never seen such clean streets lol I’m from Boston ma our streets are trash!
Hey Albert, You Ran The Stop Sign! LOL Thanks
Not bad for the price and as a replacement. If your willing/able to change the canopy I like the Boldclash F02H Pro for 21$ up to 200mw w smart audio and canopy is solid. Only thing is angle might not be enough for some freestyle pilots.
Just bought one, thanks for recommendation Albert! 😁
Thanks Albert. Could you fly it around indoors so we can see how it does there?
In the video you said you only need one ground, what do you do with the extra ground? It seems to be working when I soldered everything except for 1 ground
Pretty nice little camera, Albert... The image is great! 😊
Great flying!!!
Wow that is a surprisingly nice picture!
Al, does soldering both negative wires effect anything in a bad way? In the video here you said that you just do one of the negative wires when using the audio... Thanks bro!!!
No they are both ground so only one is needed. You're just adding dead weight.
Ineresting. So for these types of cameras, you're saying you only need to wire up one of the two ground wires? Does it matter whcih one?
Hey Albert - I just bought a bunch at $12.36. Looks like a great deal. I haven't seen anyone mention, Does the pit mode work?
Nice. I’ll remember to buy a few of these when my whoop cams break
Nice review of a nice camera clear 👍... Cool flying 👌..
Hi! Can i just use the red and black wire and connect it to my eachine e011 board and not use / cut the other four wires?
yes
@@AlbertKimTV This is exactly what I was wondering, thank you jhofre namoc for asking, and thank you albert kim for answering.
How good is this for 5 inch quads?
Tx06 will remember the frequency channel after powering off? And Which battery did u use for?
I would like to put a camera on a Syma X5C before buying a racing drone. I have thought to buy Eachine VR D3 glasses and a camera with VTX. I think the newest is the Eachine TX02Pro. There is little difference in price. What do you recommend? I have not looked at other brands and I do not know if there is something better for that price. Thank you.
I haven't tried the newer TX02Pro. Just about all these AIO cameras are about the same to me.
What's the sensor size? 1/4 or 1/3? They don't list it on the product page.
Nice find!.. Thanks for the info
Can I desolder the vtx from the camera ? Since I get an osd and the channel is transmitted but the picture is dark. This would mean the camera isn't getting any supply voltage but since the vtx is working I would want to use it elsewhere :)
Splitting these up is complicated and as you know already doesn't always work.
Hello sir.. Which band & chanel did u select to tx06 before fly? Tq
How does it handle light transitions?
Is this a good upgrade for mobula 7? Mobula 7 camera is a little washout when flying towards a light indoors. Thanks
camera preference is very subjective and also what you see in DVR is gonna be a little different in the goggles. I personally can't tell the difference between the cameras but other people will say one is terrible over the other. It's completely subjective.
Great Review!!!!
👍😀👍
DRONE review man of all drones hey bro I swear I’ve seen u on like every fpv video lol
Hey im new to fpv, i have tx06 and how can you get the battery volt display on your osd?
mine is not working, i have black video, i hooked everything right... is it a problem that i hooked the 2 ground cables together to the same ground pad?
Try swapping the video-in and video-out wires. I think they are mislabeled on some of these.
Still cheaper than the stock us65 cams, love smart audio i never want to be without it now.
will this camera run on 1s 3.7v battery? are you getting stable video if using 3.7V battery?
Why it's comes with video in and what's the use of video out because we can just plug the power and stream..
Hi, to see OSD into camera ?? module ?? linkplease :)
which one will work with Eachine ev800 google? PAL or NTSC?
Hi, is it possible to seperate the vtx from the cam and run it seperately???
It might be but I'm not sure about how it's connected so YMMV
@@AlbertKimTV I have seperated it and when just adding a 1s battery with 3,8v or something the vtx leds arent lighting up. Could this be that some electronic are on the camera??
hi,
I hv the camera but when i connect the video to the FC the OSD doesn't show up on the feed.When i disconnct only the video from the camera i can see the OSD with a black feed.(when i connect the video it kind of overlays the video over the OSD.
Does anyone know a solution?I am using the ur65
Did it fit into the ur65 camera mount good ?
I had to shove it in, but it did go in. It's not an exact perfect fit.
Any one of these "all in one" units have AUDIO OUTPUT??
Hi I was the kid who was next to you when we were at the tiny whoop Emax thing
Hey, that's awesome. What's your name? How long have you been flying? You seemed to be doing pretty good there.
Elias and I've been flying for two years
Keep on flying, you'll be super good in no time!
what transreceiver should i use with it
Why do you like the ur65 better then the us65?
the frame is more durable
should i buy the ntsc or the pal model?
That depends on what you prefer to use. I use NTSC personally.
Hows the range? Good under 300 metres?
Does the sound work? I get all static
How far can it go actually?
How to fix the zzzz noise..is it normal?
This would be nice to split.
Is it compatible with the Eachine ROTG-01?
yes
@@AlbertKimTV Are you sure?I wanna start on fpv drones,and im a student so i dont have a lot of budget,it would really suck if it wont be compatible,Ive searched online and no forum or topic about this exists.
@@AlbertKimTV or better,a question for the mass,are they compatible as long as they have the same frequency?
What googles are you using
Fatshark Dom V3
Just got one because my whoop cam broke, and this camera has the problem that there is no camera output only osd
Anyone know a fix?
What is it's range ??
It could have been a better vid if you had shown the rest of the installation. I'm just a noob to hobby drones though, so I'm looking for more of the 102 or 201 level. Otherwise, big thanks for the vid, it is a thumbs up!!
what's the width of the PCB? would it fit into an NBD V2 camera mount?
Not sure. Don't have this anymore.
Very good 👏
My tx06 the vtx is death cant i use vtx03
why do they say 4in1 ? CAM + VTX= 2in1 whats the other 2?
Add Smartaudio. What else there is I don't know
4in1 you get four wires:
Video
Power
GND
Smart Audio
I’m just making things up here! 😂
@@yolofpv2936 i think Eachine is making things up as well.
@@yolofpv2936 I figured it out.. the front of the manual states... (#1)Super Mini 5.8Ghz 48CH FPV Transmitter + (#2)700TVL PFV Camera + (#3)Brass Dipole Antenna + (#4)OSD
Haha marketing 😂
Hey I just wanted to know which is best between eachine 1000tvl or eachine tx06 please respond
which 1000tvl
@@AlbertKimTV so which one should I buy?
What is the maximum range?
With the absolute best receivers, antennas, and RF environment, about 2km max.
can i just use/solder the red and black wires without the other four wires and still get video to my goggles ?
Yes but you won't have smart audio.
awesome thank you 🙏🏾
HI Albert. It not us$10 it is around 13.99 usd. Still cheap
Crap, looks like the flash sale just ended! It was just $9.99 really, I swear!
How far its that range
200m under ideal conditions
+1👍 like it, clean video, prices in flux (ugg).
They hacked up the price to 13.99
BG changed the price faster than UAVFutures fiasco a month ago with GB and the SkyLord. Well, it is certainly not the reviewers fault...8)
Demit!
Nice👍👍👍
13.99 + $2 shipping
Can you please like the googles used
😶
Link the goggles used
nice
Why can't Americans pronounce the word solder? 😉 It's solder as in sold not sawder ? 😩
Is this good enough for a five inch quad?