If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for RUclips. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it
For the eye blinking mechanism, i think the washers should go the other way around, since it looks like the rounded edge should be down. Since it looks like the area that they go in looks to be rounded as well. But i am only going by what i see in the video.
Love you videos. I noticed that on the mouth mechanism, the round pieces on the ends of the motor aren't square. This may cause some binding down the road 🤩😀
Point on stage 9, you need some grease under the retaining washers on the eyelid rack, may help with the noise issue, also eyes not fully closing. Interesting build! All Best.
Been lurking for a bit, watching this build. I can honestly say that I look forward to checking each new update. I've been considering making the investment.
Thanks for the amazing video!! For Stage 12, the Upper Structure of the Head on the Left side, did your screw by the left eye brow from State 2.02 not tighten to the eye brow as it just spins like its stripped? mine was loose and would not tighten.. but the right side did tighten just fine.. so odd indeed.
I need ur help im following ur step by step but i dont know where i went wrong. So my eye close n everything working as it should but i can’t seem to get a eye lid to reopen . Any idea what i may did wrong . .
That noisy motor and gearing on the eyes, have you thought about taking it apart and testing the motor without the gears to see if it's just the motor or if the gears may not be in the correct position. Every time I hear it run, it sounds like the motor is under stress. I do realize how much time it would take to do a tear down to check in this, but it would be better to make the correction now in the long run. 🖖🙂
Scusami wayne sto montando questi pezzi adesso ......ti volevo chiedere se il test per la chiusura degli occhi va bene così.......a me si chiudono e basta come è successo a te è così che deve essere mi fai sapere grazie
Hi ya Wayne... My second shipment should be here today for this... I may call them and send me the next one too catch up to you on this...lol I was wondering are you doing the Lotus Sernna's car on Thursday night or your Patreon channel now... I miss that...now i know that your two boxes behind me... Just want to warn you again again the work you have to look forward on the engine... You want to talk about fidgety parts...lolol 🤣🤣🤣🤣 You ain't seen nuttin' yet...lolol 🤣🤣🤣🤣 It's gorgeous after it's done... But for God's sake be careful because your going to have to put parts all over the engine that are tight to put in and you can break other parts off ..lol Just be careful there mate...best regards always across the pond...
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for RUclips. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it
Like video
Thank you so much for these videos . My grandson and I both are building the E.T
I saw this in a movie theater when it first came out. Talk about kids crying! Emotional time for kids!
This looks awesome Wayne. Great job!
Doing this, waiting for the next pack 😊
JUST ordered my subscription and did use your promo code. When ET is complete, he can hang out with my Dagostini R2 D2 😊😊😊
For the eye blinking mechanism, i think the washers should go the other way around, since it looks like the rounded edge should be down. Since it looks like the area that they go in looks to be rounded as well. But i am only going by what i see in the video.
Wayne, I think you need to Unscrew the eyelid rack and move it farther to the rear. It looks like it needs to so the eyelids will close fully
Never mind I see you did it "off Camera"
Are the eyelids supposed to close fully. I'm not seeing that...
Love you videos. I noticed that on the mouth mechanism, the round pieces on the ends of the motor aren't square. This may cause some binding down the road 🤩😀
Point on stage 9, you need some grease under the retaining washers on the eyelid rack, may help with the noise issue, also eyes not fully closing. Interesting build! All Best.
Again, grease on sliding parts in stage 11 (commenting as I watch)!
Been lurking for a bit, watching this build. I can honestly say that I look forward to checking each new update. I've been considering making the investment.
Thanks for the amazing video!! For Stage 12, the Upper Structure of the Head on the Left side, did your screw by the left eye brow from State 2.02 not tighten to the eye brow as it just spins like its stripped? mine was loose and would not tighten.. but the right side did tighten just fine.. so odd indeed.
Could you put the two sides of the top together first and then screw them down to the head?
Yep. Didn't think.of that lol
So vary awesome
Wow this is cool. Another project I want to do. Also, THAT V.I.N.C.E.N.T model is EPIC! How do I get one of those???
It was a 3d print. The files can be obtained from www.patreon.com/ScifiProps?
Great vid
How many of these type of builds do you have on the go at the same time? Great vids.
30 lol
I guess those washers on the eyelid mechanism, should be rounded edge down, to allow friction free movement in the slider. just an observation
I.put them flat head down otherwise you will get chatter
I need ur help im following ur step by step but i dont know where i went wrong. So my eye close n everything working as it should but i can’t seem to get a eye lid to reopen . Any idea what i may did wrong . .
It's a servo motor. Just switch the polarity of the wires and it will open
@@WorldofWayneUK thank u pal , it work . Much appreciated
Why not use a Q-Tip to apply the grease
Because you really need to cake those gears
That noisy motor and gearing on the eyes, have you thought about taking it apart and testing the motor without the gears to see if it's just the motor or if the gears may not be in the correct position. Every time I hear it run, it sounds like the motor is under stress. I do realize how much time it would take to do a tear down to check in this, but it would be better to make the correction now in the long run. 🖖🙂
It's caused by gear chatter from using nylon gears
The survey moter works but it won’t move the eye lids can figure out what I did wrong
It should move one way. Reverse the polarity of the wires and it should move the other way
Scusami wayne sto montando questi pezzi adesso ......ti volevo chiedere se il test per la chiusura degli occhi va bene così.......a me si chiudono e basta come è successo a te è così che deve essere mi fai sapere grazie
Yep that right. And when you reverse the polarity they will open
Hi ya Wayne...
My second shipment should be here today for this...
I may call them and send me the next one too catch up to you on this...lol
I was wondering are you doing the Lotus Sernna's car on Thursday night or your Patreon channel now...
I miss that...now i know that your two boxes behind me...
Just want to warn you again again the work you have to look forward on the engine...
You want to talk about fidgety parts...lolol 🤣🤣🤣🤣
You ain't seen nuttin' yet...lolol 🤣🤣🤣🤣
It's gorgeous after it's done...
But for God's sake be careful because your going to have to put parts all over the engine that are tight to put in and you can break other parts off ..lol
Just be careful there mate...best regards always across the pond...
No. I wad already to do Pack 7 of the Lotus build on Wednesday and then realised they haven't sent me Pack 6 yet
If you run out of grease just get a tube of Vaseline and an old paint brush to apply it.
Vaseline is petroleum based and can weaken some plastic over time,
actually I kinda find him a lil creepy....lol