SUBARU Forester Headlamps- REPLACEMENT & AIMING!
HTML-код
- Опубликовано: 14 дек 2018
- ✅ I GET TO THE POINT! FAST AND EASY AND INCLUDES BONUS TIPS. Remove and Install the front bumper with no damage. See better at night. Safety is key when it comes to lights. Subaru lamps age over time and leak collecting water inside. Install new and enjoy the nice look too!
*if I have helped you out-please consider tipping me with the "Thanks" button 😃
✅Works on many second generation Foresters. May work on all Subaru models and years. Subaru uses similar bumper styling and attachment on many models.
Video ✅
05-08 Forester lamps: amzn.to/319OF4R
Trim locks for bumper: amzn.to/2NVV3sF
Trim lock pliers: amzn.to/32za7AD
Subbie videos ✅
Front wheel bearing: • A+ SUBARU Front Wheel ...
Rear wheel bearing: • OH BOY! Subaru's Stubb...
Sway Bar Link Sounds: • LOOSE AND BROKEN SWAY ...
Link Replacement: • Video
Bushing Replacement: • SWAY BAR BUSHINGS | ...
Crank bolt removal: • WIZARD TRICK Removal o...
Crank bolt removal: • OLD SCHOOL HOLDING TRI...
Cam bolt removal: • MAGICAL TRICK for Suba...
CV-Axles: • Video
Wheel locks: • Video
Headlamp replacement: • SUBARU Forester Headla...
Code P1507: • Video
Subaru snow plow: • Snowsport + AWD = PLOW...
Fuel Lines: • SUBARU EASY Fuel Line ...
Crank timing gears: • SUBARU Crankshaft Timi...
Timing belt routing: • SUBARU Timing Belt Ins...
Favorite tools ✅
Quiet Bands: amzn.to/2Lr3CKo
Headlamp: amzn.to/2LskvEG
Hub shocker: amzn.to/2Q2b0jO
Power Probe: amzn.to/2NTyaGg
Hydraulic flare kit: amzn.to/2N8Ijzg
Antivibration hammer: amzn.to/2N8W8ho
Pry bars: amzn.to/307BL6b
knuckle savers: amzn.to/2LnkfGS
Spark plug sockets: amzn.to/2N7dnzB
Hose tool: amzn.to/2LoD649
Chassis Ears: amzn.to/2Ltl1SD
Soap: amzn.to/332qyWd
Pewdiepie Chair: amzn.to/2SfIElm
My dogs favorite toy: amzn.to/36irgRl
Ultimate wheel bearing removal tool ✅
Hub Shockers: • HUB SHOCKER Hub Buster...
Support the channel and grab some swag ✅
EF-Merch: teespring.com/stores/easy-fix...
Thanks for being here. Your time is valuable, I try keep my videos only as long as they need to be.
See you next week
~Shaun 🔧
Easy Fix is a participant in the Amazon Services LLC Associates Program, a program designed to provide a means to earn advertising fees by linking to amazon.com
If you purchase from affiliate links I will get a small commission with no extra cost to you. This helps me to make more videos. Thank you! - Авто/Мото
*_Wizard MUST SEE Timing belt trick for Subaru:_* ruclips.net/video/WGZOXrIq2Q8/видео.html
*_Best Subaru tool for Impossible Rear Wheel Bearings:_* ruclips.net/video/eKqYtMdlPYo/видео.html
*_New sway bar link video_* ruclips.net/video/0S8JBe_jn6g/видео.html
Worked like a charm! I had to figure out a few of the clips on my own, but, man, did this help! Did the whole thing without a lift in under an hour.
Excellent! Nice job😀🔧
Best video on this topic I found, by far. Best camera work and explanations. Minor request: show the headlamp adjustments on the lamps themselves, other than that perfect..
Thanks Jim! I’m really glad you liked it. Sorry about the headlamp adjustment missing section. I’m working on being more comprehensive in my videos. Have a great day 😃
Concise yet complete across all phases of installation. Thanks for an easy to follow how-to.
You are welcome! Thanks a lot for the comment.
Super helpful and clear, thank you 👍
Thank you! No problem. Glad to help! 😀🔧
Thank you. I need to replace both my forester's headlights and bumper cover and you just showed how to do it here.
_Excellent! Let me know how your project goes please._
Thank you. Very informative video. Well done.
No problem! Thank you 😃
Very helpful, thank you
Glad it was helpful! 😀😀
You did so much work
Yup bumper removal for headlamps is kinda crazy but normal now. 😃
Ty man you are a saver ! 21yo got a forester , this car is a fcking dream ! goes everywhere
Awsome! Subarus are incredibly agile and simple durable vehicles 😀😀
@@EasyFixShaun Do you got advices for timing belt or anything? when i floor it it takes 1 / 2 sec to rev up and finally going faster. i got a power prob i used to reach 180 km/h not its 150/160 max, my steering wheel shakes while driving fast. CD reader is not powerful enough to suckthe cd in. and many more probs aha. i take every piece of advice u can give me aha, Thanks !
The translation is hard to understand but i think i know what you mean.
If you suspect the engine timing may be off, i would suggest removing the engine front cover and inspect timing marks to see if everything is correct. That is the best way to verify 😀
Thanks👍
Thank you for watching 😀
Fantastic video. i wish i had found it 6 months ago, might have saved some anxiety.
Thanks! I am fast no matter how long it takes. 😀 Sorry I couldn't get this video to you sooner!
Good video. Those pin clips behind the fender are a bugger to get out.
You are so correct! No problem, glad to help 😃
Seems like a lot more work than I realized I may have to pay someone to replace mine
Sorry it didn't work out. Pulling a bumper is always a tough project for me too😃
I GOT THE SAME ISSUE SAME SIDE DAMN THATS A LOT JUST TO GET TO THE HEADLIGHT
Agree. Its crazy. If you do these lights everyday you can get em in and out fast. But if it's the first time, take your time. Removing the bumper is very doable but awkward and dealing with a lot of plastic that can break. Also you want to be warm so the plastic isn't brittle 😃
God I wish I had a garage/workspace like this. I need to do this job on my Forester but I’ll be doing it outdoors. :(
It does help to have heat and lights for sure. You will get there. I've been there too. It's harder outside but it can be done. Do it when it's warm out if you can, that will help the plastic to not break😀🔧
Gingerly...Smashed.. Like..
Hahahaha! represent 😄
Farkkkk that a lot of work
It was. But i think to do it a second time would be much easier. Really want to take your time the first try to get the hang of it 😀🔧🔧
Great video, but man, that music is loud! Thanks for posting. Liked.
Sorry about the audio levels. I am working on that. Did you get your headlights installed?
Not yet, I haven’t bought the new ones yet, I wanted to see what kind of a job it would be to replace them. I opened up the rear access hole and warmed them up for a while to let the water evaporate. For a trip I am taking tomorrow through a lot of rain I will put a strip of packing tape across the top and see if it keeps the water out. That Top seam seems to be where it is coming in.
@@sdold That is a great idea! Good luck, keep me posted :)
The packing tape didn't help. I sealed the top edge really well too, so I don't think that's where it is coming in. It might be coming in the 1/16" drain holes I drilled in the bottoms of the lenses. I'll cover the holes next time I have a chance to dry them out. I never thought I'd be this cheap.
Bummer man. I wonder where the heck the water is coming in? I don’t blame you for trying. Cheap fixes are the best!
Nice video! I want to buy 4 LEDs for my Subie Forester 2007 but I don't know what type of connectors I need in order to connect them properly. I wanna skip the part of remove the whole headlights out and just to replace the bulbs with new LEDs .
I think on of them should work, type 9005 or type H11
Can u help me?
Yup. There are lots of manufacturers making led light conversion bulbs. Some are good. Some are not. I’ve had good luck and bad luck. Bad luck usually means you have to purchase another brand and replace the lights all over again. As far as looking up the right part start with your bulb number that you want to replace and buy the bulbs to convert. You may not want to buy the cheapest kit. The best kits are usually a little more money. You get what you pay for kind of thing. There is a lot of junk available. Take your time and select something that you think is going to last.
Hi, Small question, i need to change only the inside light/ bulb that is out of light. I have the replacement.... is doable for a non car person? do you have any do and donts?
Hi. You can replace all of the bulbs without removing the lamp no problem 😁
What is the name of the tool you used t remove the plastic clips?
ATD 8579. I think there is a link below the video in the description. Gear wrench also make a set of two or three pliers.
Any way to fix the water ?
There are some ways to remove the lamp and "un-bake" the seals for disassembly in your home oven. Pretty slick. Although I must admit I have never done that. I replace the lamps only. Much faster and easier. Check out some videos on you tube on that. You should be able to find some 😀
How long does the whole process take? Thanks.
1 hour. But if it is your first time plan 2/3 hours just to be safe 😀🔧
I need a pair of light where can I get
I would try ebay. I think mine came from AM Autoparts. Let me know if you can't find them!
Don't forget to subscribe 😉
What bulb size is that ?
Here is a link to amazon for the 9003 bulb! www.amazon.com/Philips-Standard-Halogen-Replacement-Headlight/dp/B00Y9VPK4W?crid=WG87YZRPS03U&keywords=2005+subaru+forester+headlamp+bulb&qid=1666700261&replacementKeywords=headlamp+bulb&sprefix=2005+subaru+forester+headlamp+bulb%2Caps%2C95&sr=8-4&vehicle=2005-13-57------------&vehicleName=2005+Subaru+Forester&linkCode=sl1&tag=easyfixplusam-20&linkId=55f6e6c298c83a01dea5acd1fadbeb59&language=en_US&ref_=as_li_ss_tl
Are the sports model headlights interchangeable with this model?
I think so. But please don’t quote me on that. I believe they all fit the same.
@@EasyFixShaun I ordered some, will let you know!
Good luck. I will feel terrible if I’m wrong.
@@EasyFixShaun lol no worries, I looked at a ton of photos and all the mounting points look the exact same
Ok I’m glad you checked it out!😀
What are they charging you for the headlights there (U.S. I guess)? In Australia the Subaru dealership charge $950!! For ONE!
Seems like 500-600 per lamp here. I wonder why its such a price difference?
Got a replica headlight for $300 new. Will definitely use this vid to help me out today. Cheers
Nice. Ya sometimes that's the best option. Good luck! Cheers 😀🔧
That was an expensive fix, all you needed to do was top off the headlight fluid, it was obviously low. Serious tho, I'm thinking of replacing mine. Tried the whole buffing thing to fix the oxidation haze and its back a year later. I'll be referencing this video.
Hahaha! Thank you!
@@EasyFixShaun - the ginger man smashed thumb , eh? perfect . thanks. clearcoat after the polish! wax; baby oil. keep the O2 away.
Haha yup!😀🔧
There is gonna be a couple clips ……. and video jumps past an important fastener.
Im pretty sure i showed all the fasteners. Which one did I miss?
That sneaky one up under the inner fender well. Plus it is a tough one to access by just turning the wheel. I snapped a picture of it simply to see what I was dealing with. layed on my back, shut my eyes and did by feel in the dark no less !
I did remove it during the time lapse portion of the video but failed to point it out. Sorry about that. I don't know how i missed that. My apologies 😀🔧
How much to do this installation?
I would expect a repair shop to qoute at least a couple hours for the replacement of both lamps. Multiply that by their labor rate. I would say 100-200 roughly.
Easy Fix thank you! They -Subaru sure didn't make it simple did they? I replaced my old 2001 Mustang headlights assembly myself I was impressed & surprised! But I wouldn't even think about taking a bumper off!😬 You made it look easy but.... do you have any recommendations brands, websites etc for the best most reasonable reputable companies to get the whole headlight assemblies for both sides? If I gotta spend that much for installation I can't spend an arm and a leg for the parts but I want them to last! I have a 2007 Subaru Forester that I plan on keeping till the wheels fall off! Also, any suggestions for the type of bulbs led, halogen, etc? Both of the original covers are hazed and the passengers side is covered inside with condensation really bad the low beam on that side has stopped burning not sure if it's just a burnout bulb or because of the condensation. Am weighing weather I need to replace both sides of bulbs or replace the whole housing on both sides. Any thoughts? Thank you for your response, I appreciate it!
No problem. They whole bumper coming off for lamps is a real bummer! You can replace them yourself though. Once the bumper is removed they are easy. As far as recommended manufacturer.....aftermarket will be the most affordable and look great initially. They are made in china usually. Sometimes they get water inside of them within a year, which is disappointing. I have had to replace them twice, on several vehicles. The best parts, will no doubt be from Subaru. I don't know the cost but I know they will last forever. So if you are keeping your car forever go with Subaru. That way you will only need to do it once. For bulbs, Led bulbs seem to be bright. They are almost too bright! You can find those on ebay and amazon. Usually any lamp that you buy will come with standard lamps in them.
Easy Fix thank you! Thanks for the info I guess the aftermarket parts are gonna be cheaper but if they don't last then you may as well spent the extra $$ and get the Subaru parts, saw another video just now on here and this guys light went out - cover didn't look to have condensation in it but he figured out the ballast had water in it so I guess that's another possible that could cause issues? Again thanks I'd really like the look of the new assembly but at possibly $300 for parts and another 2-300 for labor it's not a cheap fix!!🙄
I agree. Ya it’s a bummer on the cost. But you will see much better! 😀