How To Program A Chevy Silverado Key 2007 - 2016 DIY Chevrolet Transponder Ignition
HTML-код
- Опубликовано: 27 фев 2020
- A DIY video tutorial on how to program a new key to a 2007 - 2016 Chevy Silverado.
This procedure is for when all keys are lost for your Silverado. If you just need to add a key, you can find that video here • How To Program A Chevr...
More free key programming instructions available at www.ProgramAutoKeys.com
Remote programming instructions available at www.ProgramYourRemote.com
1. Insert a new cut key in ignition and turn key to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
3. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn key OFF then back ON. The key is now programmed. Start vehicle to test key.
This procedure will program a new transponder ignition key to following years of Chevrolet Silverado : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016. Авто/Мото
I used this procedure on a 2014 with the "High Security" key. It worked, but slightly different. On the third cycle I didn't notice any difference, but when I flipped it off and back to "on" the security light started flashing; I waited about 30 seconds and removed the key. After pondering for a couple minutes I put the key back in and switched to the "on" position - with no security light on. At that point I tried to start and it "kerchunked" like the guy in the video said and then it started on the next try. I would not have tried this without the video, and while things were slightly different in my case, it got me there!
I used the same procedure for my 2021 Silverado and it worked just fine. The only thing that I did different was after the third time around with the new key, I had to use my previous programed key to turn the vehicle on and off and then I inserted the new key to program it. Gold. Thank you very much. Saved $150.
You’re Welcome! Glad it helped
@@PYR-Auto is there a way to program the key fob too? I can't find any tutorial on it. I am talking about the alarm controller with the automatic start.
Thak you for helping me program 2 remotes and one new key for my 2008 Silverado. This truck we just purchased and came with an old key and remote. Thank you so much again.
You're Welcome! Glad it helped
Just wanted to thank you for this video, it helped me out so much and thanks to your video I saved a headache and some money, I hope that you keep posting videos, God bless and again thank you
You're Welcome! Glad it helped!
Thanks this worked great my dad had a 2012 Silverado 1500 that he lost the keys for it he bought 2 keys i watched the other vid and it worked great thank you so much!! saved a lot of money
You're Welcome! Glad it helped
Thank you for uploading this!!! Worked for us! Saved us a tow to the dealer!
Glad it helped!
This video is very useful thank you so much sir for this video. It literary saved me $180 just paid 30 for the key and followed your instructions.
Glad it helped!
Where did you get a $30 key?
This worked and my original/ only key, which was assigned to driver 2 from when i purchased the vehicle, did not get deleted! Thanks!
You're Welcome!
Used same procedure for my son's truck worked like a charm thank you for sharing.
You're Welcome!
THIS WORKED PERFECT FOR A 2017 SILVERADO THANK YOU SOOOO MUCH THE DETERNET LIGHT IS STILL ON AND THE THEFT LIGHT BUT AT LEAST I CAN NOW TAKE IT TO A DELAER
The 2017 Silverado is actually supposed to have 2 keys programmed during this procedure - programming a second key in may solve the theft deterrent light
@@PYR-Auto I have 2 new unknown cut/chipped keys and a programmed fob, I don't have a programmed key. 2017 silverado 3500hd ltz will the process be the same for me?
Very helpful. Installed an Ignition cylinder on a 13 2500 HD. Worked perfectly!
Nice!
Thank you. This helped me a ton and saved me $150
You’re Welcome!
Thank you so much! it worked for Silverado 2013!
Great! You're welcome!
I have a 2018 silverado single cab and lost all keys will this work for my truck aswell
i must have bigger problems. 14 Silverado 2WT 5.3. Anti theft light never went out at the 10-11-12-13 minute mark. Have a 2000 Silverado with over 375,000 miles and only money in it has been oil changes, brakes, filters, spark plugs. No more Government Motors for me unless its a prebailout squarebody. None of all this electronic BS thats designed to fail. Most new wont make is halfway thru payments. Your video is great, plenty of info. Glad its helping others. Mine must be that 1 in 10 thats the typical GM junk from about 2007 and on.
Can I ask you a question I need to replace my lock and cylinder in my 2014 Chevy Silverado work truck I took the other one out but it's a problem to get the brand new one with key how can you help me to get a brand new lock and key ignition
It worked on my 2017 2500 Silverado! I did it exactly as you said.
Nice!
Bro this was awesome, thank you!
You're Welcome!
Gracias me ayudo mucho
Can i reprogram an existing key toa new code so that the stolen spare doesnt work? Or do i have to get a new unprogrammed key?
09 chevy silv. Worked great thank you so much
You're Welcome!
Worked perfectly, thank you!
You're welcome!
Where can I buy the 2014 Chevy Silverado key and ignition cylinder
Tried, alarm keeps going off. 2013 Silverado LTZ 1500, any thoughts?
My security light does not go out at 10 minutes. (or even much longer).
I did go ahead and go through the entire sequence turning off at 10 minutes 3 Xs before I saw your video. It did not start.
After watching your video I started watching for the light to go out, but it has not gone out at all. Ideas?
Worked like a charm on a 2006 Malibu. Thank you.
You're welcome!
I got a check vortex 2500hd 2008 how can I do a code for my truck to work could you please help me out thankyou
Got my truck started, thanks man!!!!
You're Welcome!
Thank you so much you are very helpful
You're Welcome! Glad it helped
It Worked Thanks A Million Brother
You're welcome!
Worked perfectly thank you
Your Welcome!
Thanks for the help 😀👍
You're Welcome!
My light isn't turning off when I do this? 07 Chevy Silverado 1500. Original key broke off in ignition. Got it out and then got a new chipped key made. Now it's stuck in anti-theft mode. Idk what to do. 😭
My lock thief light when I try to start this it keeps blinking never solid - I don't have the old key it got lost ..
Worked on my 13, but the light is still on after starting and driving. Nervous that its gonna lock the vehicles up if I repeat it or do another procedure...🤷
My question is who will cut a blank for you so that you can program it yourself I can’t find anyone in my area who will they require they program it or they want cut it and automated key machines charge as much as 200 dollars plus!!
Man thanks really helped me
You're Welcome! Glad it helped
Great video helped me save 100 bucks. Liked and subbed
Glad it helped!
I have two brand new keys, after I program the first key can I follow the same steps for the second key. Thanks
Yes, but you would need to program both during the procedure. Depending on the year of your Silverado there may be a shorter procedure you can use to add a key - you can check your year here www.programautokeys.com/classified/silverado-browse-746.aspx
ooohhhhhh... it work.. made me a believer...
Nice!
Thanks bro 🙏 🙌 💯
You're Welcome!
Thank you 🙏
You’re welcome!
What about when u have two new keys do u have t reset each key that came with the new cylinder?
That’s the question I have what was the answer thanks
Do I have to have a newly cut key, I have three keys that were previously programmed to the car with the old ECU and I need to know if I will be able to use the same key to just program to the new ECU that has been replaced
I can't say for sure but In many cases replacing just the vehicle computer does not have an effect on the transponder ignition system or the transponder keys.
@@PYR-Auto the new computer had a different vin number on it than what's equipped with my car and I was wondering if that tripped my security system
Worked for my 2016 colorado
Great!
great video , my question is how many keys can i have for my 2015 3500hd LT 6.0 FLEX. the reason i ask is because i bought the truck used with only one key
You can have up to 8
It worked on a 2010 Silverado but I did not have to pull the key out after the 3rd cycle. Turned it off and immediately started it. It did not work when I pulled the key out after the 3rd cycle as demonstrated in the video.
I did what you said i turned it off but didn’t take it out and it started right up after sitting for a few months
I had a key cut at the dealership and brought it home to try this procedure but the key won’t even turn. It’s locked like it’s not recognizing it. I thought it might be the steering wheel needing to be turned a little to release it but still nothing. Any advise?
If the key wont turn the ignition it sounds like it wasn't cut properly. You should still be able to turn the ignition before they key programmed.
Why is my security light not going out after ten minutes?
I've been trying it on my 07 and can't get it to work any advice
If you are doing the procedure exactly like the video and are closely watching your times- there may be an issue with the key you are using
ive done this and it worked great how can i go about adding more keys ? is that something i can do or a dealer only deal thanks !
There is actually a shorter procedure you can use to add keys - that video is here ruclips.net/video/lL8WRtVpY7o/видео.html
@@PYR-Auto does it matter that we only have the one key since we lost all the others wanna make sure before we mess somthing up trying to program it. thank you
This doesn’t seem to be working for me and my 07 Silverado HD. Alarm icon blinking.
How do I get it to stop blinking so I can fallow procedure?
Hey man did you find a solution for this? I have the same problem
Didn't work for me not sure why. I bought an ignition and key from friend went through the procedure seemed to be going fine but would not start. Any thoughts?
Same
Does this work for 2011 Buick LaCrosse? I got a new ECM
No this will not work on a 2011 LaCorsse
I have an 08 Silverado that the key starts and unlocks the door but sets off the alarm every time. Does this mean the key was never programmed?
If the key starts and runs the vehicle then it is programmed. An un-programmed key may start the vehicle but it will shutoff almost immediately.
Hi there , I tried this procedure few times but it didn’t work . Whenever I try this procedure the the lock light in dashboard keep flashing. So how can I do programming new key . Actually my old key was broken outside not in cylinder. Please help me
Having the same issue. Any details on how you fixed yours?
Do you have a video on erasing the existing info, and adding new? So the old keys don't work?
This procedure will erase all previous keys
Is the programming the same for a 99 chevy silverado after replacing the key cyclinder
A 99 Silverado does not use a transponder key, meaning no programming is required.
Is 2007 chipped, or use a transponder?
How do I go about getting the key cut? I have no keys currenlty. What does the locksmith use to "cut" it since I have nothing currently?
You will need a Locksmith or Dealership. Dealerships and some automotive locksmiths can cut the keys by code. Some locksmiths can also hand make keys by doing what is called impression.
The dealership by me wants to cut the key by using the old one. I told them I've had 2 locksmiths try with no success. One locksmith said to get him a key code from the dealership. I feel as if I should just get a new ignition.
The dealer can usually look up the "key code" and cut you a new key based upon your vehicle's VIN. Just have the VIN and two items that show you are the owner of the vehicle (title, insurance card, tag receipt, etc) and your ID. Cost us $92 with tax included and then I used the procedure in the video to pair the key to my truck.
Hey man so I called a mobile locksmith and made me the key for my 2018 Silverado and according to him he programmed it with a Obd programmer. My truck starts But that light is still on any advice?
I'm not sure If the truck starts/runs and you have no other issues I wouldn't worry too much about it
How do you know how the blade should be cut if you dont have an older key?
The key can be cut by code by a dealership or some automotive locksmiths
Is this procedure the same for a 2007 classic 3500 after I change the ignition? My ignition is going bad.
Transponder ignitions were not used in the Silverado until 2007 and the 2007 classic was built on the 2006 platform, so I don't believe your key even needs programming.
@@PYR-Auto it does have a transponder in the key, I have tested starting the vehicle without the key near the steering column. And it shuts down almost immediately.
If it is equipped with a transponder ignition then yes this would be the procedure it uses. Although I've never personally used this procedure on a replacement ignition, as long as you replace it with an exact OEM ignition then it should work
@@PYR-Auto that's the plan. The key and Ignition cylinders wafers are worn out. Thanks!
I have only one key. How do I program my new ones after getting them cut?
If you already have at least one working key then you can use the link to the video that is in the description box of this video.
I replaced my cylinder key with a used cylinder and a matching used key. The procedure did not worked. Does the key has to be "pristine", meaning that it has not been programmed before?
The chips in the keys lock to a vehicle after programming, I'm assuming that's why you are having issues. You should be able to get a new chip key duplicated from the one you have, then program it.
My lock smith told me in his book it shows for my 2011 Chevy Silverado you need both keys to reprogram a key I can only duplicate at this point with my one key. Have you heard of this?
does the words " SERVICE THIEF DETERRENT SYSTEM " have to be on the dash board, or, not visible on the dash ?
I'm not sure either way, but I would just proceed with the programming
Mine says the same thing
Hi what if you have 2010 Silverado with vin starting with 3 Mexican build
Thank you
These instructions will only work on US vehicles. Unfortunately I do not have the programming information for the Mexican built Silverados.
What do USA made vin start with number 1 ?
I have only one original key I want to program another one how it will be done 2018 Chevy Silverado?
There is a link in the description box of this video for the "add a key" procedure
@@PYR-Auto add a key
Will my key fob still work after this ?
Yes, this doesn't has no effect on the fob
My key is broken off in the ignition. It still works but I can't get the broken part inside out.
if you are unable to get it out you may need to contact an automotive locksmith
@@PYR-Auto thought I'd try taking the ignition out first. Thanks for your reply.
How do I add another key after this
There is a link in the description box of the video for that procedure
Can you leave for open to do it or door closed like key fob
You can open and close the door during procedure - I got out of the vehicle every time in-between filming
@@PYR-Auto thank you it worked just as you described it. I had the door open the whole time and about 31 minutes my key worked. I organs a second key for the truck the next day by putting good key in turned it on turned it off put in new key turned on turned off and it worked also
Great! Glad it went smoothly
Could I essentially have my key cut at an automotive key smith and then try this step to avoid going to the dealership and paying all that extra money for a key with a chip?? I have a 2014 silverado 1500
Yes
@@PYR-Auto thank you. As it turns out, my key I had bent, I was able to take a heat gun to it, with an and a rubber mallet to straighten it out. But thank you and I won't forget your advice. Have a good one and cheers!
cool - glad you got it figured out
@@PYR-Auto thank you sir,sorry for the typo
I need to add a key to my 14 Silverado can you send me the link please
This video will cover a 14 Silverado
Will this work for a 2010 suburban
Yes
Will this work for a 2011 Malibu?
Yes
Will this work on 2008 Chevy Silverado?
Yes - as long as it was built in the US
So I can get a key cut for my 2008 Chevy at the dealer and come home and do this myself?!
Yes
Program Your Remote it worked!!
I did this and I can't get my key to work. The dealership cut it ..it turns on but the light won't go off like in your video. Any suggestions
Saludos
Tired this on my 2013 Silverado 1500 had a key made by the dealer had to show my title and ID to get one cut I went through the motions 3 different times and it never work, I’m pretty sure this is the same video the last time I lost the same set of key some months back and it didn’t work and had to have it programmed by the dealer but even they said they had issued programming that they had to flash my ecu and relearn everything 🤷🏼♂️ probably same scenario this time, don’t understand why
This should work on a 2013 Silverado. If you have had issues programming keys previously due to the ECU that could definitely be an issue this time as well.
This works for me however. I’m on the 3rd day straight having to do this every morning. Any recommendations?
not sure, you may need to get your vehicle checked out - you definitely should not have to repeat this every day
I screwed up doing the test. I tried to répertoire but light won't go out after 10. What should I be trying
I have a uncut Chevy on a 2017 Chevy Silverado dually
Once you get the key cut you should be able to use this procedure
In the event someone is refusing to return a key, does replacing both keys render the old key inoperable?
This procedure will erase all previous keys
@@PYR-Auto thank you.
Did it start?
Yes
Everyone has the same video but no one has anything about if this doesn't work
My security light blinks. It ain’t solid like the one in the video. Help
I would recommend just going off of the time rather than the security light - if that does not work there could be an issue with the key you are trying to use or the vehicle itself.
I got the key from my local Gm dealer, but okay I will go off the time. Thank you.
Did it work?
@@airborne_12v no it didn’t, just took it to the dealer ship.
Shevrolet tracker 2 smart key Id4A покожите как программивание
Saved my fucking life
Glad it helped!
My security light continues to blink. do you know how to get the security light to stay on so that this work. It wont work if the light continues to blink
Did you ever figure out the fix for this?
Having same exact problem , light continues to blink
Me too, Passlock is flashing, Programming does not work.
Ignition won't turn for unprogrammed key
No, an unprogrammed key does turn the ignition - as long as it was cut properly
didn't work now what
Worked perfectly on my 2009 silverado 1500. Dealer wanted to charge me $190.00. F**** them a****ls!
Glad it helped
😂
What’s your email?