HOW TO REPLACE TIE ROD END DODGE RAM |FIX STEERING WEAR OUT WOBBLE |MOOG REPAIR CAR PART REPLACEMENT
HTML-код
- Опубликовано: 15 авг 2013
- ORDER AUTO PARTS HERE: amzn.to/2rmEzyM
this video is about replacing an outer tie rod end on my 96 dodge ram 1500 2wd 
Авто/Мото
Thanks man. This helped me out alot. Good luck on future rspairs.
Great video!
Job Well Done
Just left Firestone Store after getting new tires. They told me a need a new tire rod end and Hub Assembly. Always Something :)
What was that white thing you used and what were you doing?
***** at 3:56.
I am trying to put the inner tie rod back in but it isnt that simple. Do i have to compress it back in?? the outer one goes right in...
i have the same truck as you, 1996 ram 1500 2wd, no lift kit, your tie rod end dropped in from the top, on my truck, it's installed from the bottom, the castle nut is on the top. the stock tie rod end was installed from the bottom. is it installed wrong?
So my truck shakes on highway going over 60 I just need the tie rods replace or entire section
I installed a steering damper and never had the death wobble again !!
Any luck fixing your problem habit? Im having the same problem.
I had the same shaking. All the wear/rubber items in my front end suspension needed to be replaced and it helped immensely. I also put on a steering box holding plate which also helped as well. When I just replaced my warped brakes and bearings (2500, and 3500 have old style bearings in the center of the rotor and mine is a 2500) i noticed my tie rod end boots are broken open. I had noticed a small return of the high speed shake. I am going to change the tie rods myself and definitely get an alignment which should fix my issue.
I have a 2001 dodge ram 1500 4x4. My tie rods are crap, where'd you order yours from?
Looks like he used MOOG tie rod ends. You can get those anywhere (Napa, etc.)
Thanks for the video
2:30 its "rusting and seizing" (pronounced seez-ing, not s-eye-zing)
DO you believe this would fix the so called " Death Wobble"? I have a 95 dodge ram 2500 that shakes like crazy and pulls to the left hard at times,usually when I hit around 40 or 50. It just started happening frequently I just wasn't sure what to fix I don't want to get ripped off taking it somewhere. Thank you for the video and any feedback you may have.
Iccullus you probably need a sway bar.
Iccullus you need an alignment if it's pull to one side. Simple fix.
WHAT IS THE WORLD IS "SIZING" AT 2:32 ? DO YOU MEAN SEIZING ?!!?
WHY ARE YOUR GLOVES SO DAMN DIRTY!!