Custom Mini Pit Trike - Part 1 Do We Turbo It ?

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 252

  • @Boostedlifestyle
    @Boostedlifestyle  2 года назад +52

    Need a custom pit trike to tow around my promod lawnmower now I guess 😂 but for real 1 week until sick week! Let's get this done 😁

    • @essentialone1
      @essentialone1 2 года назад

      3 wheelers are so unstable front end with single wheel for steering, Personally I would use single wheel rear for drive using a sway arm from motor bike and duel wheel steering front would be so much better, Could even use individual front steering sway arms on front so it lean over when steering, ya know the ones I means, Coz leaning. ruclips.net/video/4vtOcou_qXQ/видео.html

    • @andychapman6646
      @andychapman6646 2 года назад +1

      Idk if this will help but most mini bikes have 2 bars across the top where u sit, not one

    • @Fearlesse46
      @Fearlesse46 2 года назад

      Yes turbo

    • @TheHonda300ryder
      @TheHonda300ryder 2 года назад

      Haha Awsome! Just wondering when you are planning on more mini Roy content !

    • @free67
      @free67 2 года назад

      Hell yeah brother! Sick week sounds awesome. I'd love to meet Cleetus or Derek sometime. Hope you get lots of content. You doing any streaming during the event?

  • @douglaslila9825
    @douglaslila9825 2 года назад +20

    Kyle Nose what he's doing! Keep up the good work! My wife and I enjoy the content.

  • @SloppyMechanics
    @SloppyMechanics 2 года назад +7

    whenever i drill i make sure to stiff arm it or put it against my forearm, leg etc so its already against something and cant get a free swing and 300* me, maybe consider a way to mount it lower?

  • @UmmmmmmmWhat
    @UmmmmmmmWhat 2 года назад +9

    The two rear tubes are a good design choice. Gina will be happy you decided against the Canadian Castrater single tube. 😄

  • @billmegnin9288
    @billmegnin9288 2 года назад +7

    Starting to move up as my favorite Canadian. That's a sick little buggie frame

  • @MrMcNorm
    @MrMcNorm 2 года назад +4

    Ahh I feel Smrt. Watching the process of figuring out the two upward bars where the camera is just off to one side, found myself leaning to the right trying to see if they were lining up properly like I was right fuken there, lol.
    Blue Dream is a helluva strain.

  • @goingcrazy8186
    @goingcrazy8186 2 года назад +1

    I like how you’re going out of your way to learn new skills. Probably the best content you could have for people to relate too

  • @g1tipsandstuff
    @g1tipsandstuff 2 года назад +1

    Building things like cars and camera… I like it

  • @ninjapumkin
    @ninjapumkin 2 года назад +2

    Wouldn’t it be nice to be in a nice warm shop in Edmonton where things are more accessible and cost less then Ft McMurray 😝

  • @danielporcelain3596
    @danielporcelain3596 6 месяцев назад +1

    Can you tell me what size pipe you used for the mini trike? Thank you for all the awesome videos.

  • @escondidonative2903
    @escondidonative2903 2 года назад +3

    You should keep the tires that size. Love the meaty look with how low it is. Reminds me of a Rpf1 17x9 look with thick tires.

  • @dailybikingcommute1132
    @dailybikingcommute1132 2 года назад +2

    Awesome! Looking forward to this latest build and your trip to Merica and the freedom factory! 🇨🇦🙌

  • @tngtacticalmiata1219
    @tngtacticalmiata1219 2 года назад +1

    Allright, man... ya got me... it was the little trike.. I mean ... I love the lawnmower build... but, I'm a sucker for a trike...
    Mebbe I'll start something soon.....

  • @Andrewlang90
    @Andrewlang90 2 года назад

    I did the same thing you did with the drill, but with a Milwaukee Hole Hog. I had a 3/4” 16” auger bit, and was trying to drill through a 2x6 length wise for a gas line. It grabbed a knot, swung around the Oh Shit handle and smacked me across the bridge of the nose, giving me a bloody nose and concussion. Fun times. At least yours wasn’t too to bad. This is a cool little pit trike your building. Can use the lawnmower as a push/pull ride. Cheaper and cooler then a smart car

  • @Todd_G_FPV
    @Todd_G_FPV 2 года назад +2

    Your learning as you go... that my friend is called progress! Good work man!

  • @theunpretentiousvegan8593
    @theunpretentiousvegan8593 2 года назад +1

    Sorry to hear you're going to be sick for a week. Get well soon! ;-)

  • @billlevassiur5891
    @billlevassiur5891 2 года назад

    Like your approach, trial and error. Good energy. Really nice project.

  • @acurarl9929
    @acurarl9929 2 года назад +1

    Them tires make it look so cool 😎

  • @3rdgenjunkies57
    @3rdgenjunkies57 2 года назад +1

    Hell yeah!!! That thing is AWESOME

  • @chrisv6008
    @chrisv6008 2 года назад +2

    MAN THAT'S GONNA LEAVE A MARK!

  • @jordansrc8483
    @jordansrc8483 2 года назад +1

    Definitely turbo it. 👏👍

  • @jamesweldon8118
    @jamesweldon8118 2 года назад

    Frame looks way better the second time
    Gina be a sick little build

  • @melkerpersson3323
    @melkerpersson3323 2 года назад

    Nice frame !
    Thanks for the tips !
    Ill Will build a few with 420cc motor .

  • @roberthaslip
    @roberthaslip 2 года назад

    Man I did the exact same thing with the drill but it got me right over my eye! Caught it on video too, Haslip Cycle Works. Love the build.

  • @huxmetalworks7371
    @huxmetalworks7371 Год назад

    Great job love your work more please I'm a fan love the little trike thanks for sharing

  • @raelik777
    @raelik777 2 года назад

    Aside from the triangle plate at the back, you'll want some kind of gusset on the frame neck tube, mainly just to prevent any twisting between the top tube and the two bottom frame tubes. You could put some around the bottom of the frame, but I really don't think they'd be necessary at all, almost all the force is downward at those points.

  • @davidfloener7539
    @davidfloener7539 2 года назад

    I can't wait for you to experience that sticky ass surface that is Bradenton motorsports park! Koller track & next door to the freedom factory, welcome to my backyard

  • @thebadassbuickfromcamrose8541
    @thebadassbuickfromcamrose8541 2 года назад +1

    Remember we do pit bikes races at forestburg a couple times a year...

  • @TheBlaqDeval
    @TheBlaqDeval 2 года назад

    Love the idea and how you ended up with the dual brace than the high camel bar at first ... Hope there is anyway you can make the seat braced and bit far from the fuel tank

  • @EdWolfram
    @EdWolfram 2 года назад

    The first frame iteration was perfect size to hang a turbo in and be right at the intake and exhaust.

  • @Todd_G_FPV
    @Todd_G_FPV 2 года назад +2

    This is awesome man, have u ever built anything with electric motors and stuff? I think a 72v boma or vevor motor with a 72v kelly controller would work great on this build!

  • @jaredwilson1007
    @jaredwilson1007 2 года назад

    Built a lot of karts. Vacuum fuel pump off of the valve cover. Pull the governor. Stiffer valve springs. Bigger eBay carb with huge filter. Open long header blowing the debris away from the drive tire. Good fuel. That 6 hp turns into about 13.

  • @mikeyacullo
    @mikeyacullo 2 года назад

    Those wheels and tires Are sick

  • @MrHotshot417
    @MrHotshot417 2 года назад

    Verry cool and my notcher had the same issue with going off set so i spaced out the hold down with a few machine washers

    • @Boostedlifestyle
      @Boostedlifestyle  2 года назад

      I shimmed mine with a 10 thou feeler gauge and it works a bit better now

  • @RkunsawGarage
    @RkunsawGarage 2 года назад

    That's going to be sick! Can't wait to see it completed.

  • @myprojectguy358
    @myprojectguy358 2 года назад

    5 days, 40 hrs. (80) you got this, Killin it!

  • @DisgustedGenXr
    @DisgustedGenXr 2 года назад

    I could hang out for life doing this kinda stuff.

  • @williamsracing241
    @williamsracing241 2 года назад

    I need some part numbers or link to some of these parts and a sketch or drawing with some dimensions hahaha. Watching this video just makes me want one lol

  • @derangd3339
    @derangd3339 2 года назад

    That last design looked way better

  • @That1E_K1129
    @That1E_K1129 2 года назад

    Dude your going to be the talk of the pits!

  • @bobbyrosa4652
    @bobbyrosa4652 2 года назад

    Love this build.... I had a thought for the seat. if you made the seat pan part of that triangle bracing you spoke of joining all the bars together then all you'd need is a rear brace down to the frame above the axle so the load is distributed evenly. Might look rad?? also gotta add some led lights so folks can see you... especially being down so low.
    Either way.... I'm sure youre gonna kill it as usual!
    Good luck!

  • @kylesyx8432
    @kylesyx8432 Год назад

    You wear it well !!
    & great job

  • @jpwdowiak
    @jpwdowiak 2 года назад

    The Center bar kind of looks like you got inspiration from you haircut 😂 Have fun on Sick Week!!!

  • @ferdifresh8464
    @ferdifresh8464 2 года назад

    thats gonna be a swagged out whip

  • @Tittos_E_36
    @Tittos_E_36 2 года назад

    New build already.? Damn u getting crazy 😂❤️

  • @jmarkou69
    @jmarkou69 2 года назад

    This looks sick!

  • @kuleroy5731
    @kuleroy5731 2 года назад

    Kyle look up cuppini handlebars, really think that type of handlebars would look cool on the trike🤟

  • @Ismaak5
    @Ismaak5 2 года назад +4

    Remember when you turbo a single cylinder engine, you need an air reservoir between the turbo and the inlet 4 times the volume of the engine. Reason being single cylinder, single exhaust valve spinning the turbo once every 4 strokes. Otherwise you are spinning and stopping the turbo.

  • @EZMONEY1980
    @EZMONEY1980 2 года назад

    You could use a motorcycle bobber style seat.. or even a springer seat!

  • @MMMX38
    @MMMX38 2 года назад

    This thing is going to be friggin awesome dude

  • @mikeyacullo
    @mikeyacullo 2 года назад

    Iv built so many minibike. It's s blast. Love it. Go-karts also

  • @klaasbloem
    @klaasbloem 2 года назад +2

    It won't be very stable in corners, 2 wheels in front and one rear is a much better setup. Will be fun though 🤣

  • @mark8lifestyle322
    @mark8lifestyle322 2 года назад

    Kyle, you should use an endmill bit the same diameter as tube that you want to notch in your metal lathe.

  • @tylerchrist14
    @tylerchrist14 2 года назад

    FREEDOM FACTORY! I’ll be watching from Germany. Have fun.

  • @mikeyacullo
    @mikeyacullo 2 года назад

    Make sure you put a torque converter on it. I put one on my minibike preditor 212 it was nasty

  • @thefrugalhandyman5054
    @thefrugalhandyman5054 2 года назад

    Yes definitely turbo trike!

  • @rgreerjr
    @rgreerjr 2 года назад

    I personally would suggest moving the position of the rear axle back ~10-12 inches maybe even more just so you aren't sitting on top of the axle.

  • @BWA_O
    @BWA_O 2 года назад

    Im still waiting for The Mini Roy!!!! Also use elecrtic tape or duct tape to hold it in gear for the drill it will help lol maybe ill just order a nice dewalt and send it to you.

  • @engineerpauly7480
    @engineerpauly7480 2 года назад

    Yesss! Turbo it! 👍👍

  • @zweihammerheavyind.2911
    @zweihammerheavyind.2911 2 года назад

    Put pvc drift sleeves on the rear for an even less safe toy than the mower, that I would also love to have.

  • @travisbeavers1203
    @travisbeavers1203 2 года назад

    When sat on the step stool thing it looked like sissy bar...ol school chopper I could dig that too

  • @builtonabudget6160
    @builtonabudget6160 2 года назад

    Turbo???? YESS YOU CAN DO IT !!!

  • @twistedkidmotorsports9093
    @twistedkidmotorsports9093 2 года назад

    You need to drill 8 inch vent holes to relieve gases from building up inside the tubes

  • @toxiclaboratories7070
    @toxiclaboratories7070 2 года назад

    Looks great

  • @slikpunz247
    @slikpunz247 2 года назад

    Id definitely say its better with a turbo send it!!

  • @Tinman97301
    @Tinman97301 2 года назад

    Badass build man 👍

  • @andyswmr714
    @andyswmr714 2 года назад

    If there is every question about turbo-ing a thing. The answer is always YES.

  • @jamescouch7732
    @jamescouch7732 2 года назад

    The crazy guy with eight turbos must turbo the mini three wheeler

  • @LuisOchante-j8q
    @LuisOchante-j8q 3 месяца назад

    Esta muy bueno eso disculpe de casulidad tendra las medidas para poder realizarlo muchas gracias

  • @bobbycook4721
    @bobbycook4721 2 года назад

    If you do turbo it you should do a before an after et run to see if it improves anything

  • @TheShepard5348
    @TheShepard5348 2 года назад

    Know you already have the tires but it would be wise to use a round shoulder profile instead of the square shoulder tire. Would make steering reaction better.

  • @terrysibley9636
    @terrysibley9636 Год назад

    Nicely done. On a lighter note 2 hours 2 tubes first time. Hey education cost. Lol
    Keep up the good work

  • @ericbiles4273
    @ericbiles4273 2 года назад

    the trike looks cool I worked n fabrication for years I know with the editing and all you've probably already mounted the seat but if not u could put a piece of pipe under the intersection wear the frame mounts n the back and make the seat like u were talking about but but have the bottom of the seats are it will slide in and out. for the pipe welded n the intersection it would have u lower and would look like its floating and it would adjust in and out slide it back for weight transfer were u could do willys and shit but it still looks cool the way u have keep the content coming

  • @LifeWithBillSiff
    @LifeWithBillSiff 2 года назад

    Looks great from here man!!

  • @cammos
    @cammos 2 года назад

    Best candadian on the tubes

  • @thman6453
    @thman6453 2 года назад +1

    Be honest ATK had to set you straight and got a little ruff lol 👍

  • @ericgutierrez7855
    @ericgutierrez7855 2 года назад

    What axle kit and wheels are you using? Are all 3 wheels and tires the same sizes? This thing is sick man!!

  • @lancecosby3205
    @lancecosby3205 2 года назад

    Don't forget to plug that hole on the turbo lawnmower

  • @blindgarage8531
    @blindgarage8531 2 года назад

    I have a custom mini chopper trike would love to turbo charge it you will have a bowl Kyle love your work mate blind garage approved 5 gold stars

  • @caleballen5592
    @caleballen5592 2 года назад

    Those are good motors, but in my experience the carburetors on them are junk, so if you aren't going to do EFI then I definitely recommend a carb swap to something such as a Honda GX200 or Briggs and Stratton Carburetor. If you want something spicier then a Mikuni would be the way to go! I would love to see you slap a turbski on that thing! XP

  • @Barton_Motors_Ltd
    @Barton_Motors_Ltd 2 года назад

    This is cool Julian… but don’t get too behind on the cars! Can’t wait to see the fox tear it up this year

  • @ld3941
    @ld3941 2 года назад

    this is getting very interesting! I like it

  • @steffentysnes5302
    @steffentysnes5302 2 года назад

    I feel like it looks more like the two rear wheels are the front, would be cool to make a mini 3wheeler with two fronts and one rear.

  • @BenjySparky
    @BenjySparky 2 года назад

    Kyle you rock! Love the channel and content! I'm here for the algorithm! Peace

  • @DJ_LampShady
    @DJ_LampShady 2 года назад +3

    What happened to the mini leroy build?

    • @shane_7even_ten569
      @shane_7even_ten569 2 года назад +1

      It turned into the mower

    • @Boostedlifestyle
      @Boostedlifestyle  2 года назад +7

      Man nobody listens 😂 it's a space issue Its too big to build in the garage with two cars in here. It will make a comeback don't worry

    • @FamilyAffairFishing
      @FamilyAffairFishing 2 года назад

      Mini leroy will be the best build to date!!

  • @andrewjck1
    @andrewjck1 2 года назад

    Can you mount that tubing jig on your drill press???

  • @goobworx
    @goobworx 2 года назад +2

    nice

  • @WesIncredible
    @WesIncredible 2 года назад +1

    you should make a shirt that has a BUNCH of your quotes all over it. "It's all done...after I finish all the welds"

  • @matthewleno4027
    @matthewleno4027 2 года назад

    Tape the selector on your drill before she knocks ya out buddy👀

  • @Thatonebuilder
    @Thatonebuilder 2 года назад

    What kind of turbo is on your turbo mower

  • @mikeyacullo
    @mikeyacullo 2 года назад

    Yeah gotta ditch the gas tank. And exhaust.snd get an after market carb kit for that. Makes it so much better

  • @brianmeattey4151
    @brianmeattey4151 2 года назад

    You might need a small well narrow tire in front for steering abilitiey

  • @seriousisland47
    @seriousisland47 2 года назад

    You can turbo it just not yet, build it with turboing it in mind and keep it n/a for now.

  • @justinp2993
    @justinp2993 2 года назад

    No turbo. Play with this for the week, come back and get back to the Mustangs. Spring weather is actually coming faster than we think.

  • @tieofdnfk8017
    @tieofdnfk8017 2 года назад

    Always need a turbo

  • @trentgladson5853
    @trentgladson5853 11 месяцев назад

    What wheels and tire combo did u use

  • @aroncharlwood1777
    @aroncharlwood1777 2 года назад

    Should go a springer seat like a hardtail chopper

  • @ellisberry8747
    @ellisberry8747 2 года назад +2

    Hey man we already spoke about building something electric…I promise you this is the perfect candidate.

    • @Boostedlifestyle
      @Boostedlifestyle  2 года назад +2

      Omg electric swap after !?!

    • @ellisberry8747
      @ellisberry8747 2 года назад

      @@Boostedlifestyle I sent you some videos of my electric build on Instagram…it’s super fun honestly.
      I can tune it with a usb to my pc now it’s cool af

    • @ellisberry8747
      @ellisberry8747 2 года назад

      You don’t wanna be going a million miles an hour on that thing do you so I’d stick with a 48v system.
      But get a high discharge battery and a good controller and send some current through it. It’ll have torque for days.
      Screw the lawnmower you can tow the ‘stang 😀😂

  • @7795Dakota
    @7795Dakota 2 года назад

    TRACTOR SEAT!!! You need a tractor seat mate!!

  • @calvinaleto640
    @calvinaleto640 2 года назад

    Yes we turbo it