It drifts so well, stance is so perfect, not looks so real, this is SCALE! I would love one of these if anything try to attempt to make one one day, this is dope
I'm doing on it rn, you'll need a radiolink R4FGM or R6FG receiver(you can do drift with it because it has gyro), radiolink RC4GS or RC6GS transmitter, FH-1083 steering servo, micro motor with pinion and spurs gear, and a bluetooth battery. The rest are cable, wire, axles etc and you have to make your own steering parts and modify the base no idea why I'm replying a year old comment😅
I am building one right now. But I keep having problem with the front wheels. It's lifted when turn servo to the right or left. When test drive, one of the front wheel would not spin together with the other 3 wheels. My car cannot drift properly, do you think it is because front wheels are not balanced? If so, any suggestion on how to get front wheel balance. Thanks so much!
If you wouldn’t mind what’s the film layer on the drift surfaces? I want to build a car to drift on my desk and wonder if I should build a track as well.
pleeeease make a tutorial on how to make one and where to get parts, i also wonder what the costs are, at least u can get the body and wheels for 3 dollars lol
These will be about 35-50 dollars in parts right now. You'll basically need a micro esc, micro servo 1.7g, and a micro rx recieverer, as well as the micro n10 motor. That's the bare minimum and then you will need an rc TX transmitter which will run you about 50-100
Aye bro that trick with the paper clip coating, to essentially make a lug nut was clever asf! Definitely going to try that!
Thank you very much 👍
Wow dude the ebisu course looks amazing as well as the car amazing work my friend 👍
Thank you very much
Nice hot wheels rc build and clean 🔥🔥🔥💯
Thank you very much
Great job! Love the 240.
Thank you very much my friend 😁👍
Love that you made the steering out of paper clips and needles, what sites can i buy wheels and the circits boards from? Would love to try this
wow it actually drifts insanely cool 👍
Your a master! Love your work.
Amazing... Semangat terus bro.
It drifts so well, stance is so perfect, not looks so real, this is SCALE! I would love one of these if anything try to attempt to make one one day, this is dope
Thank you very much 👍😁
Do you have a parts list for this? I want to build one so bad after watching this haha
I'm doing on it rn, you'll need a radiolink R4FGM or R6FG receiver(you can do drift with it because it has gyro), radiolink RC4GS or RC6GS transmitter, FH-1083 steering servo, micro motor with pinion and spurs gear, and a bluetooth battery. The rest are cable, wire, axles etc and you have to make your own steering parts and modify the base
no idea why I'm replying a year old comment😅
@@JustArei nah it’s ight bro you helpin me😂
@@jose_abrego9564 😂
@@JustArei where would i get all these?
@@iamkneeoh4031 I’ve just ordered alll of it from Ali express
What have you put on the floor to make it drift that well? Amazing video
It's glass
@@fingerdrifttv1531 Whats the slimy on the glass?? it looks like liquid glue?
@@magicmeister3209 oil
Gawhdamn! You nice with it.
Thank you very much 😁
It's very clean and can drift very smooth
This one is so cool 🔥🔥🔥
I can't believe that motor and rc parts could be fitted well on s13.. woww i am speachless
Thank you so much 🙏
@@fingerdrifttv1531 One question. Did you change all rubber wheels to plastic? Or just rear wheels?
I am building one right now. But I keep having problem with the front wheels. It's lifted when turn servo to the right or left. When test drive, one of the front wheel would not spin together with the other 3 wheels. My car cannot drift properly, do you think it is because front wheels are not balanced? If so, any suggestion on how to get front wheel balance. Thanks so much!
sick build
Thank you
How do you make all this? I want to start making my own but I have no idea on how to do so....
Is that a pigma pen, the black one you used for the headlights?
Awesome work ; thinks :-)
If you wouldn’t mind what’s the film layer on the drift surfaces? I want to build a car to drift on my desk and wonder if I should build a track as well.
I'll tell it on the next video. Next video is the making of the track. Stay tune on this weekend
Hey what ESC is that I’m trying to build one but I can’t find that one you have, btw I love your build and tracks!
This looks incredible and super smooth operation! How long does a battery last and how do you charge it?
ini sih goks parahh 🔥🔥🔥
Hehe makasih ya 👍👍
I am new in this little projects and, my friend, are doing great job. Well done. I have some questions for you, will you be able to help me?
Agak telat, tpi gafafahhh lah yg penting nonton :v
Hehe siap makasih yaaa 👍😁
Do you need to charge it at all?
New subscriber salute
Thank you
Did you use sandpaper for the wheels???
Great work!!! 👍👍👍😊💪
After seeing this I’m going to make one
Great. Good luck 👍
👍👍👍
wow fnatastic design
Wow I like it a lot! But is there a certain controller you need?
YESSS!!!
Класс!!! 👍👍👍
What is the drift board made from? Help Please!
😍😍😍😍
Will you show us how to make a controller for this
Wow
U put oil inthe yard drift?
What's the tool you used on your dremel to cut out the lower grill been looking for one pls help
Mantap👍🔥
pleeeease make a tutorial on how to make one and where to get parts, i also wonder what the costs are, at least u can get the body and wheels for 3 dollars lol
These will be about 35-50 dollars in parts right now. You'll basically need a micro esc, micro servo 1.7g, and a micro rx recieverer, as well as the micro n10 motor. That's the bare minimum and then you will need an rc TX transmitter which will run you about 50-100
what material did u use to construct the front axles? whats the diameter?
Bro what’s on the drift surface, I noticed the tire marks an that’s a solid effect 🤙🏾
Its glass with oil
is there a link to the kit for this? if not can you give me a link too one
where did you get those electrical parts?
This dope
That's mad could you make one for me ?
What type of tires do you use. Is it rubber or plastic?
Plastic tire for the rear wheel
@@fingerdrifttv1531 Fi Are those the standard wheels/tire or do you make the plastic tires (and how?)
@@edwinnuismer I deleted the rims from the standard Wheels using mini grinder
@@fingerdrifttv1531 Does the Micro ESC need BEC?
what kind of spur gear is it
why is the floor like wet?
Can we get a parts list for the electronics?
Post some more videos of this
Video on ur courses
Telat setahun bang ahahah
The controller is?
Gimana cara mesen nya ini.. sy harap ada link Tokopedia nya untuk RC hotwhells ini
Whats on the ground astroglide
It's glass
@@fingerdrifttv1531 nah you can see tracks
Do these have a gyro?
Yess
There's so many crap video make drift car can't drift. The steering angle not enough or no gyro at all. This build no joke it drift.
А как заряжается аккумулятор?
How do you recharge it
Sir can you make 1 for me r34 and s13 i'll pay you
What is the moter called
Dasmikro micro motor
@@fingerdrifttv1531 can you list all the parts pls?
@@vocm9617 If you follow my video you'll find all the parts
itu tebal metal sheet nya berapa?
Yo can you make one for me?
Can I get the parts list ?
Looks like to much work for me can I just buy one from you
Yess sure. I'll make it for sale later.
Open custom kah om
Yes, bisa Di DM aja di IG sy untuk order
hi there can i buy one of your rc drift cars?
DM me on my Instagram account @fingerdrifttv
Some one send this to scotto
😅👍
Can u start selling these pleaseee
Okay.. what kind of car do you like?
@@fingerdrifttv1531 Subaru BRZ or gt86 pleasee if u could I would definitely buy
@@fingerdrifttv1531 how will I buy it?
@@userrr21421 it's a custom & sell so you should stay tune on my RUclips channel or my Instagram
@@fingerdrifttv1531 wait so what if other people buy it and I can’t ?
Bang antena receiver kalo dipotong apa ga ngaruh di jaraknya?
Ngurang dikit
Lagian buat RC mini harus d potong. Mainnya gk pake jarak jauh
Takutnya jaraknya malah jadi 5 meter an
Dipotong apa disolder lepas bang?
@@fadinardiansyah9551 oh engga. Bisa lebih dr 20 meter yg pernah sy tes. Belum sempet tes lebih jauh lagi
Can I buy the chassis at least?
I will sell the RC next time. Stay tune
@@fingerdrifttv1531 omg thxs I’ma have my notis finna stalk you when will that be?
@@fingerdrifttv1531 also how did you make ebisu teach
@@vocm9617 I'm so sorry I didn't make a video about it. But I'll promise I'll do the video for another Ebisu circuit Course
@@fingerdrifttv1531 okkkk
Bro are you human?
Of course
link countainer box please
It's a acrylic box container you can go to online store
@@fingerdrifttv1531 makasi om
Tp klo masih ada link nya share donk om
Bro sale the cars
I did. Follow my Instagram account Fingerdrifttv for order
I’ll pay 75 or more pls let me buy one
75 bucks🤦♂️ that wouldn’t cover half the electrics let alone the time. Don’t be a cheap twat