Airsoft info / 生存遊戲 新槍介紹系列「GHK 553 大部分解保養及插銷問題」

大家好，我是Q毛~~第二集上來囉！！這次做了大部分解及保養；最主要的還有針對553槍身前插銷難以安裝的問題作分析及改善方式（在10分左右），沒有此問題可以跳過該段。那接下來第三集就請大家稍待片刻囉~~~Q毛這週要帶小朋友去看醫生唷~~就請大家看影片囉！一如往常的：請大家不吝指教唷；有說錯或是有沒說到、不足的，也請大家留言告訴我唷。
影片在也會放到
/ qmoerairsoftinfo
喜歡的人就幫我去那按個讚或是追蹤吧，當然也希望能分享給需要的人啊！！大感恩！！
PS：大家沒有去抽獎的要記得去唷~~~~連結在下方！！
說明影片： / 2194545077494621
HYZ官方FB： / hyz-sport-eyewear-8141...

[@刘劭炜]

作为对岸的枪迷 只能看着你的视频流口水 希望多盖萧一些新枪

[@stu575359]

剛入手 只有 感覺上方魚骨 有點軟
其他部分 基本算上乘 真的是一把好槍

[@cd850207]

再補個彈道測試打靶測試啦~完美

[@mhehhd]

你好，請問可以拍G36C的拆解保養嗎 謝謝🙏

[@malthus101]

Mine arrived with the rear sight falling out, the spring and plate came out and now I don't know what to do.. also, the swiveling finger guard had the rear screw all the way out - I tightened with my finger but.. it's pretty sloppy workmanship from GHK.

[@qmoerairsoft]

I am very sorry to hear this news.
Currently my 553 is not in my storeroom (my friend borrows)
I am sorry that I can't take the film in time to answer your questions.
But I have a small suggestion: cover it with a red dot sight.
And the textual description of the part of the screw
.
It is not clear which part
.
If you can transfer photos to my FB Messanger
.
I can try to help fix it.
Thank you for watching my video.

[@malthus101]

thanks for offering to help!

[@APair0]

If you mean the screw "behind" the trigger - this is not screw to tighten trigger guard. This screw is to adjust the trigger "wall". Unscrew it enough so that trigger does not fire yet when it touches this screw. Screw is spring loaded, so after trigger touches it, you'll feel slightly more resistance to press it further - so here is your wall. Adjust then by screwing/unscrewing to how much travel you prefer from "wall" to the "break". Of course, you can have it fully tightened, with no distinctive wall :-).
So, this is why this screw was not "tightened"... and it is the same on the real steel SG 5xx. You can find on youtube video of someone explaining this adjustment screw on the real steel gun.

[@rebelvision8247]

非常好！👍🏻👍🏻👍🏻

[@qmoerairsoft]

非常感謝您的支持及觀看！！

[@hon922]

毛ｑ。有事問問，，那條ｐｉｎ。。我跟你弄緊了。但太震的關係，都是會打幾槍會脫ｐｉｎ的情況。。不知道有什麼解決方法。。謝謝。。我只想到加穿一條細細的索條算了

[@cd850207]

說明詳細~辛苦了

[@matsumoto523]

Q毛大 我發現要把準星轉到很左邊才會歸零，而且準星轉動機構的設計也怪怪的，能否發表下您的意見？謝謝啦

[@stu575359]

Q毛 請問 槍管內管 如何分解？

[@user-fs8ju1gi1r]

请问 这把553怎样可以把外管拆下来呢?

[@qmoerairsoft]

目前有看到的影片是下身細部拆解，而上身做多拆到跟Q毛差不多的地方，目前Q毛手邊沒有553所以不能馬上回答您，最近如果有看到拆管的影片或是手邊有553就會拆來或是傳影片讓您參考。
真是不好意思

[@gundam8473]

聲音希望再大一點

[@qmoerairsoft]

瞭解收到了，Q毛會著手改進~~~感謝您的回饋唷！！

[@gundam8473]

Q毛的生存遊戲大小事 終於有可以輕鬆看有講的清楚的頻道能看了

[@9906021b]

第一名