Controlling everything with Node-RED dashboard via MQTT
HTML-код
- Опубликовано: 19 окт 2024
- This video will guide you with how to control appliances in your home as well as monitor sensor's data using Node-RED Dashboard running on the Raspberry Pi board.
The Relays and the sensors are connected with ESP32 and ESP8266 board which are acting as MQTT client communicating with Raspberry pi board acting as a MQTT broker.
Try our free trail version of Altium Designer Software - www.altium.com...
To watch the detailed explanation of NodeMCU code and Node-RED Flow, JOIN techiesms membership for less than a Dollar - / @techiesms
You can support me🙏🏻 and also get benefitted on Patreon :- / techiesms
Subscribe now💪🏻 to watch some amazing videos coming up soon.
bit.ly/techiesm...
_________________________________________________________________
👨🏻💻 Important Links 👨🏻💻
ESP8266 project video - • Multiple Sensors, Mult...
ESP32 project video - • Internet & Manual with...
Installing Mosquitto MQTT broker on RPi - • Home Automation based ...
Codes and Node-RED Flow - bit.ly/2Y7q7JU
_________________________________________________________________
Now you can get free PCB with every order of techiesms T-shirt or techiesms pocket notebook.
You can buy the merchandise from here,
techiesms.com/...
_________________________________________________________________
👀 You may Like these videos 👀
Cheapest Cloud MQTT Broker - • Cheapest Cloud MQTT br...
Home Automation based on TASMOTA firmware - • Home Automation using ...
All in One Home Automation project using Blynk - • All in One Home Automa...
_________________________________________________________________
Buy the components from your projects 💡🔌
ESP32 board - amzn.to/3jiwCD6
NodeMCU - amzn.to/2wbzNrZ
5V Relay - amzn.to/2OXAewN
BC547 Transistor - amzn.to/2SK3Fna
9V2A Adapter - amzn.to/3bDZjGx
7805 IC - amzn.to/2SunOic
PIR Motion sensor - amzn.to/2wclovE
DHT11 Temperature & Humidity Sensor - amzn.to/2UP8y0R
Proximity sensor - amzn.to/326YP7P
MQ135 Gas Sensor - amzn.to/2SKFBR4
LDR Light Sensor - amzn.to/2SsYskp
2pin Terminal Connectors - amzn.to/37uezT2
1n4007 diode - amzn.to/2SL4n3x
330 ohm resistors - amzn.to/2OQqUuz
Visit my Amazon Storefront for purchasing any components you need for this project or any other project :-
bit.ly/techiesm...
_________________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Microphone - Samson Meteor (amzn.to/32jfVAt)
Editing - MacBook Pro
_________________________________________________________________
Subscribe Now :- bit.ly/techiesm...
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
You can support me and also get benefitted on Patreon :- / techiesms
_________________________________________________________________
Song: Hozgram - After
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Hozgram - After (Vlog ...
techiesms
explore | learn | share
Excellent Video! Keep making more videos using Node Red ! Keep up the clear and precise explanation! Been watching your videos for a long time and this one i believe is the most complex and yet you covered it up so beautifully. Cheers and Best Regards
Great video, very clear and to the point. And I love your energy.
Great video, good explanation.. keep exploring new things for the benefit of all electronic enthusiast. Looking forward for more videos related to wireless communication between raspberry pi and bunch of esp8266/ESP32+push button without any internet and mobile application/device.Thank you 🙏
Thanks for this video, i asked for this on WhatsApp and you did it. This video completes the home automation part 👍🏻👍🏻
Very helpful,good technical concept
Hi techiesms,
what a great project! It works properly.
I would like to setup a MQTT project with one ESP32 as a subscriber and another ESP32 as publisher. The broker should be a local RasPi standalone as Broker-Server creating its own WLAN without connection to the Internet via Router or Access Point.
Can you give me hints how to do this?
The handling of the ESP32 should be easy. But with the RasPi I have got my problems to combine the installed Mosquitto and the WLAN-Server capabilities.
Do you have this setup described in one of your courses? (Please without NodeRed.)
Thanks!
Oli
Supper 👌👌 next time upload the video on how to config this with a cloud server
As soon as possible
Muy buenos videos, prácticos, continúa con Node-Red -Telegram - Prowl. Gracias
Loving the strong Indian accent, and of course the video to!
Great video!
do you connect esp32 to router or respberry pi wifi?
The best channel
good colleague. If I want to define a user on node red and want the user I want to access the device I want, how do I do it?
Thanks!
Hi , using node red for commercial use requires any licence or payment???
Ithna din laga diye iske liye bhai! Thanks btw.
NICE Video sharing. the connection to the raspberry pi i not understand. and i hope you can do if want can control over the internet
*Awesome as always* 💗
Thanks again!
Hello muje raspberry pi4 chahiye so can you suggest koy website jahase me purchase kar saku Mane Kyi website me dekha magar yata price bahuti jyada hey ya out of stock hey
hello sir, how many esp it can connect to server together
Can i use more esp 32 and connect node red sir ?
Cool videos... I really want to be in touch with you for separate discussions in IoT systems model-based testing
I can only control relays when I am logged in to local wifi network where RPi is mqtt master and it has our local IP? What about when I want to control it via mobile data or from other place? Cut to the chase, can I control relays (whole logic in Node-RED) when I am away from home?
thanks for the video - I am just getting going with node red on a raspberry pi
Plzz post video for harzards area monitoring system for industrial area Plante
Please make a video how to use aws iot Using espnow
Hi guys
Wats the best mode of connectivity between esp32 and an android tablet? From dashboard monitoring
Did you find help?
can you make it work on WAN too?
He does not reply to problem questions as all his projects are copied from someone else
@@firdoshdiakus4841 😂😂
How to make it work with internet ( port forwarding)
Did you figured it out ? :D
Can we add 7 segment display in mqtt another nodemcu or esp 32 for temperature and humidity
yes
@@techiesms can u make a video on it this Saturday plzz i want to learn it it id important for me because right now i am working on a project of temperature sensor on local blynk server and my all devices are connected to it localy but facing issue in display temperature i have 8 temperature sensor and 8 door sensor it is working fine on blynk app but i am facing issue on display temperature on 8 (7 segment display) different so plzz help me and i want it to use it on mqtt with node red plzz help me i want to learn how to code it and use it plzz
finally somebody who doesn't NEED to be put at 2x speed!!!!
Hi, how can iget data of an atlas scientific temperature sensor RTD in node red and raspberry pi 4?
kalau menggunakan ldr sebagai sensor otomatisnya gimana programnya, apakah anda bisa membantu saya, terimakasih
Can we use any cloud mqtt broker?
yes, just add the credentials of cloud Mqtt broker and it will work
Awesomeness!
Thanks!
It's not working: "Attempting MQTT connection...failed, rc=-2 try again in 5 seconds" .
Waiting sir for your video
enjoy...
*Any good free alternative for ifttt??*
I didn't find any.....
Very good, but how i can control it from the internet with the same configuration (mqtt , node red, and mosquito, with integration to home assistant) + adding the real physical button actual feedback which u did before
Need a cloud server for that
Should I make a video for this?
@@techiesms yes please to show this configuration with home assistant as i need to integrate other smart devices with my esp32 lights from the same platform (app) plus the google assistant integration which i think the last can be done easily even by ifttt
Thank you so much
@@techiesms what about adding the physical button switch feedback, how it can be added in the node red and the coding part??
How can I use mqtt without node red
Super 👍
Thank you 👍
I am getting "attempting mqtt connection failed rc=-2 try again in 5 seconds" I cant figure it out. Can anyone assist?
is the nodered web interface happening on rpi or laptop
RPi
This topic is all over the internet but no one has explained how to schedule the devices in MQTT. Why is it so hard to make one?
Im not getting your question
use injector node in node red...set time for repetitive injection and you will get what you want
where are you from?
Gujarat
Brother My nodemcu Vendor CH340 chip has getting problem fatal packet header problem. And I tried everything but nothing happens. I tried for flash also buy it doesn't flash .Please make a flash video
press and hold the flash button before powering up the board and after powering it up release the button and upload the code
Not working brother. Tell me some manual process. Please
Even my board don't blink when I connect with the pc. I bought high quality USB cable also.. please help me.. how do I know my board is ok?
Nice ❤️
Thanks 🤗
can you send me Nodemcu code and node red flow, thanks
best
Bro were to get buy esp 32 in cheap rate
Local Market is best for cheap price
Thank you sir, it's use full for me
Watch Sachin dancing @ 7:55
Can you help me with a projec? Plissss :c
what's the project?
I realize that people from india have really good sking for create contrast and deep look :)
😇😇
👍👍
Hi, Can you help me how to create a mesh network with around 10-15 esp8266 and each logging data to a raspberry Pi? Please share your email and I can send details of the requirement. This is for a home automation project
Esphome is better than this
Sir hindi language new channel plz
;-)
Please do not copy other peoples hard work and come make it like its all your work? Most of your projects have loads of coding errors means its not done by you because when there is a problem question you disappear and never reply.
Please let me know your problem
@@techiesms Finally a reply after months of trying, The code in your fingerprint reader door lock had many errors to which you never replied not even on FB or Twitter, eventually I rectified it my self spending two weeks debugging it. These projects cost a lot of money to build and you must not ignore help questions. Your projects are very good but you need to back them up when things don't work. We don't mind even if you charge a fee for helping.
@@firdoshdiakus4841 I usually reply to all the questions.
But any ways if your question was missed than I’m sorry for that
You can always send your queries on my WhatsApp number
+91 82000 79034
@@techiesms I sent you on your whats app too but no response. No problem I sorted out the errors in your code on the fingerprint door access.
Wanna fucking bet?
God help my people. My people are in great danger.
NERD :)
You talk to fast with ur hard to u derstand indian accent!!!! Thumbs down unsub!!!