I have the solstice 2.4 L and I don’t think it’s that slow. The gearing is nice and fifth gear is actually an overdrive. I roll through the gears and I move just fine. A track car it is not, but does feels nice on public roads. The handling is absolutely incredible!!
The transmission is an AR5 transmission. It doesn't bolt right up to the JZ's you have to buy an AR5 swap kit (or piece everything together yourself) you'll need a 1jz bell housing and some parts off of a Toyota R154 transmission
VT BOBBY nah basically all you need is the bellhousing and clutch stuff. But shhhh keep it on the dL nobody knows about them so they’re still super cheap😂
This car in europe is the Opel GT 2.0T 260+ hp and it comes with a K04 turbo as stock. K04 turbos are good for 400+ hp. I liked that you did it yourself and see the pontiac's version, hope your mom liked it!
Useless trivia, the Solstice/Sky was originally supposed to get a V8, but Chevrolet didn’t want any “in house” competition with their Corvette, so they forced Pontiac/Saturn to install the ECOtec four cylinder
Oh, so GM didnt allow one of their performance cars to thrive so nothing could get close to the vette... yup. Those POS' have been stunting american innovation and competition all the in name of the mIgHTy CoRVeTtE, since the day the first one was CONCEPTUALIZED. They wouldnt DARE let pontiac shine.
Yeah those foam cast blocks suck. So many had to be replaced for leaking oil through the block. Mine just sent a couple rods through the block a month ago just cruising down the highway cruise control set on 70....
honestly words cant put together how much adams videos helped me learn when i was riding my bike in gr8 and now im in gr12 with an auto mechanic apprenticeship because of what adam has taught me, thank you so much for everything and maybe one day i will do my own drift build and drive down to florida and do some tandems with you, thank you for everything adam and even though you only make videos about cars you have changed my life because of them
No lies, my mother had a 1JZ 180sx she bought off a bank manager from Mauritius, apparently the car was imported from another country. Trust me, most these stories are quite true.
That RTV on the exhaust manifold gasket is not required, and will burn away anyway. I mean it won't HURT (since it's sensor-safe Ultra Grey), but those little channels in the gasket are stamped like that because they deform when it's tightened to make the seal. ps- Invest in an Air-Lift II tool for coolant filling, it's like $100 but saves your BUTT in filling/bleeding cooling systems. It just uses shop air over a venturi valve to pull a vacuum in the system, then let the coolant flow in to replace the sucked-out air. Especially after a water pump change where you don't want a bubble to cause it to cavitate, it's a life saver, even it's just to "be SURE" there are no air-bubbles causing your probs!
This has been the greatest moment of the Year of Flex for LZ he actually made a dirty joke and cuss'd at the same time. Real gold would be if he left it!! im sure our boy was off that starbucks right here xDDD
The key to living with a Solstice is to use the opposite hand for everything. Left hand to grab things in the cupholder (still inconvenient, but that's why the included the inevitably-broken on on the passenger side of the transmission tunnel), right hand to open the door and hit the window switches. :) Fun video. Thanks!
they use a CTS-V Gen one Rear End. its the Same trans as a R154 2J/7mgte Trans. Newer version, they also use them in the Chevy Colorado. that turbo is a Stock Turbo off the Turbo Version of the Solstice. Same Turbo as a Cobalt SS.
@adamlz i think thats the same ko4 turbo my cobalt ss uses wich uses the LNF ecotec 2.0l engine, those little turbos can run 22 psi and make 300 wheel atleast on the LNF motor in the cobalt ss and the SKY..
Same type turbo as the 5 cylinder 90's volvos. That diverter valve would have torn/ripped even if it wasn't damaged in shipping. They're notorious for that any time you run over stock boost even when they're OEM replacements.
Tool/parts cart right behind them as they lay tools and parts all over the vehicle. Get it into one sock guys. Your shop looks so clean and professional.
Unsprung weight is everything (tires, wheels, axle, lower control arms, trailing links, etc.) between the ground and the springs. The reason it is important is because the lighter the unsprung weight, the better the contact between road and tire on uneven or rippled pavement (due to less upward inertia for the suspension to deal with when you hit a bump). An easier way to bleed air out of the cooling system is to apply a vacuum to the bleeder port. If you don't have a self-bleeder kit for bleeding brakes, you can use a glass jar (like an empty pickle jar), hook up a vacuum line on one side of the lid and a line to the bleeder port on the other. The light vacuum at idle will suck the air out much faster and when you start to get a steady stream of antifreeze, you know you are done. As an added bonus, you capture the antifreeze instead of having it spurt out on the engine, so it doesn't make the car smell until it burns off and you can put the captured antifreeze back in the overflow tank.
The engine block looks like styrofoam because the alloy is cast in styrofoam molds and the surface finish is transfered from the mold to the hardened alloy.
41:16 I had the same wheels for my Accord Wagon SiR in Japan and then transplanted them to my 2014 Civic Si. I love the look and the weight saving over stock. Even though they are made in Japan, Tire Rack beat local prices by over $100.
Could you put the gauge behind a vent cover and inside the space with room for air to come around it? That way she could close the vent and not see it at all, open it and still use it for A/c or heat and barely even know it's there because it would sit pretty far back...just a thought, if she finds it in the glove comp. and ends up not liking it there.
That disgrace of mustache make him look like a refugee from a “Leather Biker Bar” that or he has gig at night playing in a “Frankie Goes To Hollywood” tribute band
Sometimes it's necessary to raise the front end of the car as high as it'll go in order to bleed the air from the water jackets and lines. What a cool lil project!
weedshoes Nah, I just suggested an idea where Adam takes his mom to the track. It would be awesome to see her try to drift with Adam. I don’t see how that makes me a nine year old but ok.
Man quit hating on him... it’s not a terrible idea. it would be funny. Alan from ambush drift tried that with his dad(drift dad!) and it’s funny af. And given her screaming in Adams og videos scaring his mom I think it would be even more so😂
Not trying to tell you how to do it but i have always found trying to tighten the bolt your going to remove first seems to help and i agree with you Adam PB is KING as WD is alcohol based but hey to each his own....Hope your mom likes the addition KUDOS
The kinda guy to say KA24DE is better then sr. Stroked 2.4 have higher stroke then bore and cause it to have good mid-range and no high rpm. That's bad for going turbo.
@@dougcohen3364 they rev to 7k. And it's not like saying a KA is better. Ecotec is just a newer better engine series. Direct injection, water pump housing is molded to the block. All accessories mount direct to the block actually. Forged rods factory. Variable valve timing. It's all better.
There is a Canadian who had a Saturn sky that found out the jz was pretty much a direct bolt in. The motor mounts fit in the sky stock location. This was years ago that it was completed.
For my 2006 Pontiac Solstice I clamped all the return lines from the radiator and put the return lines from the thermostat in a bottle and forced air into the coolant tank to force the coolant through all the lines, I had to do that for about 2 full tanks or coolant, but it was mich faster than removing the coolant tank
It'd be interesting to compare it to the actual turbo GXP. My mother has one and she says its pretty much identical to how her 2001 Audi TT drove. I've not driven it but she loves it.
Exactly what Alberto said. It needs more acceleration enrichment. That stomp the gas sputter is AE needing to be tuned finer. If you have a car that sputters when u press the gas too fast, that's very bad. Bad for drivability, bad for the engine over time. Try to see if you can get that fixed !! Awesome video. Liked the change in content, was good to see you do this too. Nice valentines day mother's gift! Super stoked on your GT3 rs purchase. Excited to see you gripdrive more rip consecutive laptimes back to back on her and go for your own personal gold So that I can then beat them in my Miata :)
What was your issue with the coolant? I literally have the same problem after k04 swapping my mk4 gti. Took the thermostat out and was about to do a head gasket. Was fine before the swap.
Could you give some more information how exactly you spend on he turbo kit, than the installing and the tune? Thanks, I have an Audi A3 3.2 250hp, and considering to install turbo kit on it.
Haha this is awesome love your channel! Sucks you can't do this in So cal you will end up making your car smog illegal. Same reason I can't street drive my vq swapped 240.
@@jpeezus6519 there is a lot that goes into it more than I know and this is not legal advice. Just some basic knowledge I found is, here in so cal you have to get your car smogged every 2 years if it passes emissions your good for 2 years. If it doesn't you can't renew registration and won't be able to drive it on street until you get it fixed. Turbo, exhaust, intake, certain engine swaps will make you fail the test. You can still have your car and drive on race tracks and such though just not on the street.
@@matthias18 from what I read on some forums you might be able to get it to pass emissions I am not sure though, you would need all the smog components from the cats to original intake and anything else that was on the 350z that was smog related. In the end since I use it as my track car it's not worth it for me.
You can street drive your 240 so long as you have catalytic converters and it’s not too loud. As long as the motor you’re swapping is newer than the chassis, it’s smog legal. For instance, if you had put an tpi small block from the 80’s vettes then it would have been not legal, by because the vq is newer than any 240 ever produced, it should pass
Back when it was new, this car was better than most. I remember when this came out. I’ve always wanted one but about time I get one, it’ll be super rare. And also you know this car came with a v6 right? That v6 was pretty fast for back then.
adam i used to work at starbucks and my FAVORITE drink was a venti vanilla bean frapp with a double shot of espresso mixed in. absolutely sublime, bro.
Wanna secretly turbo and tune my car
900 IQ
fr lmao
BIG FACTS
Which one is it?
@@mustafasaqib1688 My car? BMW E90
15:40 , you will not be disappointed. 😂
It's just his new impact gun...
Lol
ahahahaha
IKR lol
😂😂😂😂😂😂😂
Gets a GT3 RS, turns into Matt from OG and uploads 40+ minute long videos. Hey man, I’m all for it.
Petar P gota make that $$ back somehow haha
We need more 40 minute vids
@@billrose6391 he would make more money on a 10 minute video. You can put the same amount of ads and the viewer retention is better when it's shorter.
Nakian no shit sherlock, but who wants 3 ads in ten minutes ya prick
Yea what he said👆
The borg warner turbos are amazing, no extra plumbing with wastegates or bovs. Super simply and good power.
I have the solstice 2.4 L and I don’t think it’s that slow. The gearing is nice and fifth gear is actually an overdrive. I roll through the gears and I move just fine. A track car it is not, but does feels nice on public roads. The handling is absolutely incredible!!
Should’ve contacted McFarland Fabrication for a custom turbo kit...
I think his mom would engine her engine intact.. Lol
She would definitely notice a hood delete
@@weedshoes5089 or a turbo out of the hood
Adam: It only needs like 500 hp
Cleetus: We dyno’d it and it make 1200 hp, we also installed two turbskis and fogged it
I heard they are backed up rn 😂😂😂
The transmission is an AR5 transmission. It doesn't bolt right up to the JZ's you have to buy an AR5 swap kit (or piece everything together yourself) you'll need a 1jz bell housing and some parts off of a Toyota R154 transmission
VT BOBBY nah basically all you need is the bellhousing and clutch stuff. But shhhh keep it on the dL nobody knows about them so they’re still super cheap😂
@@Matt_Lanzer_13 lol I feel you. That's an option for my 1JZ
@@Matt_Lanzer_13 might get one for the sc300 in the future
Some things need to be kept a secret 🤫
VT BOBBY i gotta r154 bell housing on my jz swapped e36 the trans is great!
scaring my mom on her own car part2 incoming!
Shout out ogs before the skylines, drift team, s15, and I think he may have just bought the house.
@@menthodman6969 im here since he got the s13... its been a long ride, that i have been enjoying almost every moment!
@@exoticsenior636 jesus super og!
i been here since it was bmx videos only
@@statikleo same bro
This car in europe is the Opel GT 2.0T 260+ hp and it comes with a K04 turbo as stock. K04 turbos are good for 400+ hp. I liked that you did it yourself and see the pontiac's version, hope your mom liked it!
Always fun hanging out at the shop and working on cars without cat's...lmao
“You know what Pontiac stands for?” Lmfao I really thought you were about to finish that joke
i died
Poor ole nigga thinks its a cadi?
@@ClumsyCars That just made my day!!!! 🤣
Explain the joke please?
Oh man i was laughing
Useless trivia, the Solstice/Sky was originally supposed to get a V8, but Chevrolet didn’t want any “in house” competition with their Corvette, so they forced Pontiac/Saturn to install the ECOtec four cylinder
They should've just thrown the old 3.8L SC from the GTP grand prix in it lmao
Wow that's crazy, probably will still be continued if it had a V8, looks like that car would be fun with a v8
Patrick Querry nah they axed everything when they killed the gm offbranches, no matter what it was
Oh, so GM didnt allow one of their performance cars to thrive so nothing could get close to the vette... yup.
Those POS' have been stunting american innovation and competition all the in name of the mIgHTy CoRVeTtE, since the day the first one was CONCEPTUALIZED.
They wouldnt DARE let pontiac shine.
GM offered a kit to put an LS in the car after the fact since they did so well with them in competition
Turbos moms car.
Next video : we found something wrong
Video after next video: mom gets new motor .
Week later : dyno moms car
Yo. Kdawg month later: I bought my mom a functional car
Yeah those foam cast blocks suck. So many had to be replaced for leaking oil through the block. Mine just sent a couple rods through the block a month ago just cruising down the highway cruise control set on 70....
Yo. Kdawg that would be tj hunts channel sir
honestly words cant put together how much adams videos helped me learn when i was riding my bike in gr8 and now im in gr12 with an auto mechanic apprenticeship because of what adam has taught me, thank you so much for everything and maybe one day i will do my own drift build and drive down to florida and do some tandems with you, thank you for everything adam and even though you only make videos about cars you have changed my life because of them
"You know what Pontiac stands for right?"
Pull Over Now, The Injectors Are Cooked 😂
Ha ha ha...not.
Poor old ______ thinks its a Cadillac
@@bomberbaja funny the chinese make better cars than the high and mighty white man who came up with that racist saying. Cadillac is garbage now.
you have a cool mom. My mom would not be happy if I modded her Tiguan. Looks like it turned out great.
my mom will floor the car if i did that. she used to own a turbo k20 swapped eg6
No lies, my mother had a 1JZ 180sx she bought off a bank manager from Mauritius, apparently the car was imported from another country. Trust me, most these stories are quite true.
@MrFyb ohyeahyeah im not lying she bought it in thailand in front of a Big C where used cars usually get sold
German Elite Tuning well Tiguan shares a motor with Audi q3 so no need to touch it
Most tiguans are already turbo’d
"You know what Pontiac stands for right?" *Cuts* lmaooo
RennPlus seriously!!!! Lmaooo I’m weakkk
K24 turbo Prelude incoming? Dad deserves it 👌
Would be hela cool👍😏
That RTV on the exhaust manifold gasket is not required, and will burn away anyway. I mean it won't HURT (since it's sensor-safe Ultra Grey), but those little channels in the gasket are stamped like that because they deform when it's tightened to make the seal.
ps- Invest in an Air-Lift II tool for coolant filling, it's like $100 but saves your BUTT in filling/bleeding cooling systems. It just uses shop air over a venturi valve to pull a vacuum in the system, then let the coolant flow in to replace the sucked-out air. Especially after a water pump change where you don't want a bubble to cause it to cavitate, it's a life saver, even it's just to "be SURE" there are no air-bubbles causing your probs!
*Secretly Turbo'd My Mom*
I secretly straight piped my mom
@@donovanstuart3907 LMAO
Mr.Lemon yo?!
@@donovanstuart3907 to far
Wut
THE LOOK ON TOMMY's FACE @16:18😂👌
This has been the greatest moment of the Year of Flex for LZ he actually made a dirty joke and cuss'd at the same time. Real gold would be if he left it!! im sure our boy was off that starbucks right here xDDD
Hahahaha he's like "what did you just say?!"
Hahahaha
J😂😂
@@MistahPokeymon at the moment when Tommy opened his mouth. Netflix commersial poped up. It was funny
Don’t tell your mom that you put in the turbo charger. Let her discover it on her own!
Would be so funny to find a random excuse to record a video with her in the solstice and just wait for her to realize there's something different.
IMNOTA +yeah, would be great.
1 week later : I blew up my mom's car!!
2 weeks later : sr20 swapping my mom's car!!
Slick how its gonna go. 😂 just wait
U rite
I would hope he doesnt sr20 swap it
@9600GTMAN lol there is a lot of people with the same picture
@9600GTMAN its a meme lol
Supercharge your dads IMPALA
It needs to happen
Removes cat, "it's throwing o2, that's kinda weird"
LMAO
You can secretly turbo my car any time you want
15:40 when you just busted and she keeps on going
🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂
😂😂😂😂😂😂😂😂😂😂😂😂😂😂
16:16 what she does after you bust
Adam: 170 horsepower is so boring and slow
Me: TRUE!! 170 horsepower is whack
Drives away in 104 horsepower prelude 😂😂
aVeX Awaken I got a 172hp M52TU. It’s a good daily but not a rocket.
@@FishFind3000 m51d25 here duud.
Mr20de doods. Rated at 150 but I think it's more or maybe I'm just a ricer.
M50B25 tu
Not the fastest but it gets sideways
Same m52tub25 170km e46 ;)
The key to living with a Solstice is to use the opposite hand for everything. Left hand to grab things in the cupholder (still inconvenient, but that's why the included the inevitably-broken on on the passenger side of the transmission tunnel), right hand to open the door and hit the window switches. :) Fun video. Thanks!
they use a CTS-V Gen one Rear End. its the Same trans as a R154 2J/7mgte Trans. Newer version, they also use them in the Chevy Colorado. that turbo is a Stock Turbo off the Turbo Version of the Solstice. Same Turbo as a Cobalt SS.
@adamlz i think thats the same ko4 turbo my cobalt ss uses wich uses the LNF ecotec 2.0l engine, those little turbos can run 22 psi and make 300 wheel atleast on the LNF motor in the cobalt ss and the SKY..
why Adam sound like an impact gun at 15:40 😂😂😂😂😂☠️☠️☠️
I thought the same thing lol
Thought the same thing😂😂 but more like a broken torque wrench🤣
What does Pontiac stand for? Poor old...(Demonetization)
That would've been the better title for the video
When he said that I lost it. Lol
LOL
Same type turbo as the 5 cylinder 90's volvos. That diverter valve would have torn/ripped even if it wasn't damaged in shipping. They're notorious for that any time you run over stock boost even when they're OEM replacements.
Tool/parts cart right behind them as they lay tools and parts all over the vehicle.
Get it into one sock guys. Your shop looks so clean and professional.
13:00 at first I thought the tires where that wide lol
next video: I v12 twin turbo swapped my moms soltice (1200 HP???)
Hartley 1gz jdm Toyota v12 700hp!
Secretly!
AND SHE DOESNT NOTICE
those ecotecs respond extremely well to boost
Unsprung weight is everything (tires, wheels, axle, lower control arms, trailing links, etc.) between the ground and the springs. The reason it is important is because the lighter the unsprung weight, the better the contact between road and tire on uneven or rippled pavement (due to less upward inertia for the suspension to deal with when you hit a bump).
An easier way to bleed air out of the cooling system is to apply a vacuum to the bleeder port. If you don't have a self-bleeder kit for bleeding brakes, you can use a glass jar (like an empty pickle jar), hook up a vacuum line on one side of the lid and a line to the bleeder port on the other. The light vacuum at idle will suck the air out much faster and when you start to get a steady stream of antifreeze, you know you are done. As an added bonus, you capture the antifreeze instead of having it spurt out on the engine, so it doesn't make the car smell until it burns off and you can put the captured antifreeze back in the overflow tank.
6:01 LMFAO Oh god. I was so worried he was about to say it....
Jason N lol me too
What does it stand for?
@@JDL3777 poor old N thinks it's a Cadillac
@@cumbob holy shit
"you've heard what pontiac stands for right?" *cuts out* lmaoooo
The engine block looks like styrofoam because the alloy is cast in styrofoam molds and the surface finish is transfered from the mold to the hardened alloy.
Learning
Welcome to the moms with turbos club.
41:16 I had the same wheels for my Accord Wagon SiR in Japan and then transplanted them to my 2014 Civic Si. I love the look and the weight saving over stock. Even though they are made in Japan, Tire Rack beat local prices by over $100.
Could you put the gauge behind a vent cover and inside the space with room for air to come around it? That way she could close the vent and not see it at all, open it and still use it for A/c or heat and barely even know it's there because it would sit pretty far back...just a thought, if she finds it in the glove comp. and ends up not liking it there.
So Adam do we wanna talk about what Pontiac stands for?
Chase Merchant yes I would definitely like to know.
Poor Old Newyorker Thinks Its A Caddilac
@@daidzarile hard R huh
William Johns easy a
B00ST3D SUPR4 oof man
Anyone else notice the amount of veins popping in Adam's arms? Haha
Jacob W right!!!😂💀
thats scary lol
Heroin will do that to you...
Ha mine r the same bro no heroin here ....just bud .Hhha
That's what happens when you weigh about 140 lbs wet lol
"You know what Pontiac stands for right?" Ahhh that had me dying😂
Did he remove that part?
@ 6:00
Welp, no more cheap AR5 transmissions.
THANKS A LOT
Exactly. Why did he have to say that?
Dammmmmmn rip my wallet when I trans swap my is300
that K04 is the same stock turbo my Volvo has on it, should be a pretty perky low lag turbo setup. safe and still fun for mom.
Can you secretly turbo my car too
"You know what Pontiac stands for, right?"
*Big O'l jump cut*
Dude the mustache makes you look like a chester. I'm sry🤣🤣🤣🤣
Pedo stache
Like a cop that tag teams little girls
That disgrace of mustache make him look like a refugee from a “Leather Biker Bar” that or he has gig at night playing in a “Frankie Goes To Hollywood” tribute band
Adam is correct, the Solstice/Sky manual trans is an AR-5, swap the bellhousing to an R154 and it bolts up to the JZ
Sometimes it's necessary to raise the front end of the car as high as it'll go in order to bleed the air from the water jackets and lines. What a cool lil project!
You should turn it into a secret drift car like a sleeper and get your mom on the track drifting with you.
Are you 9 years old? Because you seem 9 years old.
weedshoes Nah, I just suggested an idea where Adam takes his mom to the track. It would be awesome to see her try to drift with Adam. I don’t see how that makes me a nine year old but ok.
Alex Swander are you 11 years old? You seem 11 years old
Alex Swander her car isn’t built to drift, it’s gonna break.
Man quit hating on him... it’s not a terrible idea. it would be funny. Alan from ambush drift tried that with his dad(drift dad!) and it’s funny af. And given her screaming in Adams og videos scaring his mom I think it would be even more so😂
Adam you inspired me so much man in the past few months!!! I’m grinding so hard and thanks to you I’m so close to 3k subs!! Love you man thanks
yep, you owe it all to him. he's providing you a great platform to spam your subliminal self promotion garbage all over. great work.
Honestly he would never give you the time of day enough to even heart your comment for saying that. Sorry, early congrats on 3k subs
next vid....mom got an rb26 v spec...midnight purple...ultra rare car
Mad Mike wow is your mom my mom cuz mine has it too
Not trying to tell you how to do it but i have always found trying to tighten the bolt your going to remove first seems to help and i agree with you Adam PB is KING as WD is alcohol based but hey to each his own....Hope your mom likes the addition KUDOS
People use the AR-5 Manual trans for 2jz swaps, like 2jzgte swaps into 2000-2005 Lexus IS300's
The 2.4 ecotec is actually a better platform then an SR LOL
In Decay debatable but it’s not half bad tbh
It's not really debatable. 2.4 ecotec is a WAY better engine. In just about every possible way. Lol
Mattteeee 3.8 litre echo tech by is where it's at ;)
The kinda guy to say KA24DE is better then sr. Stroked 2.4 have higher stroke then bore and cause it to have good mid-range and no high rpm. That's bad for going turbo.
@@dougcohen3364 they rev to 7k. And it's not like saying a KA is better. Ecotec is just a newer better engine series. Direct injection, water pump housing is molded to the block. All accessories mount direct to the block actually.
Forged rods factory. Variable valve timing. It's all better.
Wanna secretly replace my car with a R32 GT-R?
Why a 32?😂 could’ve said 33 or 34 but 32!?!
@@jakob31448 why not? Hell, i want a 32
@@jakob31448 R32 is my all time favourite car 😍
Jakob Hartley don’t have to have the ones everyone sought a out for
Shouldn't you fix the cup holder situation and put in an android or Apple touch stereo display?
There is a Canadian who had a Saturn sky that found out the jz was pretty much a direct bolt in. The motor mounts fit in the sky stock location. This was years ago that it was completed.
For my 2006 Pontiac Solstice I clamped all the return lines from the radiator and put the return lines from the thermostat in a bottle and forced air into the coolant tank to force the coolant through all the lines, I had to do that for about 2 full tanks or coolant, but it was mich faster than removing the coolant tank
Dont worry jazz needs the power so he can fight megatron lmfao sick vid brother P.S. hawaii doesn’t need cats either lol
Does anyone else know what *pOnTiAc* stands for? 😁
John C poor old newyorker thinks its a caddilac
John C poor old n-word thinks it’s a Cadillac
O G what?
😯
Poor old neighbor thinks its a cadillac
16:16 safe to say that was the weirdest thing adams ever said😂
Do you know what he said?
It'd be interesting to compare it to the actual turbo GXP. My mother has one and she says its pretty much identical to how her 2001 Audi TT drove. I've not driven it but she loves it.
What you should have done for the water feed is grabbed the water pipe off a 2.0 lnf ecotec turbo, it has a water feed port on it.
10:10
"Have you ever had a dream that...."
Dude that shit was hilarious
Henski I saw what you did there 😂😂😂😂😂
And this is how you make Autobot Jazz
heres a real challenge. secretly turbo my love life.
Exactly what Alberto said. It needs more acceleration enrichment. That stomp the gas sputter is AE needing to be tuned finer. If you have a car that sputters when u press the gas too fast, that's very bad. Bad for drivability, bad for the engine over time. Try to see if you can get that fixed !! Awesome video. Liked the change in content, was good to see you do this too. Nice valentines day mother's gift!
Super stoked on your GT3 rs purchase. Excited to see you gripdrive more rip consecutive laptimes back to back on her and go for your own personal gold So that I can then beat them in my Miata :)
What was your issue with the coolant? I literally have the same problem after k04 swapping my mk4 gti. Took the thermostat out and was about to do a head gasket. Was fine before the swap.
lol adam saying 170 hp is not much while im driving a car with 53 hp
me too bro daewoo matiz
Hunter1998ice Suzuki Alto haha
RIP I think my quad has more than that lol jk ya drive what ya drive
48hp dihatsu cuore :)
only have a moped with 10 hp :P
Marco walked in for a pipe bender and you all ignored him 😂😂
Owain what time?
@@edgarcontreras3328 10:25
*OHHH LOOK ITS JAZZ* 😂
Famous last words: "You want a piece of me?"
@@TarzanGTI 😂 "no i want 2 peice"
rip :(
@@Venomleggs 😢he was the man
5:15 its called lost foam casting, its a left over design that gm got from saturn when they took the company back...
Is coolant getting to the heater core? air bubble in the cooling system, Need to pressurize the coolant system & bleed it.
Lmao imagine putting a turbo in your moms car she be thinking after a week.. whaaat
Irvine860 😂😂
Irvine860 yeah totally fucked it up... I had something in my head and this came out but you know some people kind of understand
Left my scooter outside the dairy...... Nek Minute
Legend
Nek minit
Love from South Africa ♥️🙏🙏
You know what Pontiac stands for lmao
Rodriego Samuel awe
Same
Ok 😎😎😎
😂 Issue with removal of the manifolds bolts?? The bolts on my Stang was super easy.. & it's about older!
Some cars you have to rev and hold something like 2k for a certain amount of time before the cooling system properly burps.
I have a 2007 Saturn Sky Redline 2.0 Turbo in onyx black
How can a car own a different car?
@@Sheehy223 I'm not really a car
PBBlaster over WD40 for everything except removing sicker residue.
Dangerous 340 except displacing water
@@rsharney1111 true, forgot how well it works for that.
Truth
16:16 I CANT BELIEVE ADAM SAID THAT LOL!!!
He's gotten really weird since him and Nicole Did they're whole seperation thing. Like very strange
Such a gorgeous car! Clean flowing lines reminds me of the Porsche outlaw
Could you give some more information how exactly you spend on he turbo kit, than the installing and the tune? Thanks, I have an Audi A3 3.2 250hp, and considering to install turbo kit on it.
Haha this is awesome love your channel! Sucks you can't do this in So cal you will end up making your car smog illegal. Same reason I can't street drive my vq swapped 240.
How does a car become smog illegal?
@@jpeezus6519 there is a lot that goes into it more than I know and this is not legal advice. Just some basic knowledge I found is, here in so cal you have to get your car smogged every 2 years if it passes emissions your good for 2 years. If it doesn't you can't renew registration and won't be able to drive it on street until you get it fixed. Turbo, exhaust, intake, certain engine swaps will make you fail the test. You can still have your car and drive on race tracks and such though just not on the street.
@@Rustyforty the vq is a newer engine than the stock one so with the oem cat it should pass right ?
@@matthias18 from what I read on some forums you might be able to get it to pass emissions I am not sure though, you would need all the smog components from the cats to original intake and anything else that was on the 350z that was smog related. In the end since I use it as my track car it's not worth it for me.
You can street drive your 240 so long as you have catalytic converters and it’s not too loud. As long as the motor you’re swapping is newer than the chassis, it’s smog legal. For instance, if you had put an tpi small block from the 80’s vettes then it would have been not legal, by because the vq is newer than any 240 ever produced, it should pass
Eminem reference, i see you :)
thought I was the only one
Ever since the day i was born...
Brain Damage
@@fatalgaming6068 me2. But stans forever
15:45 I have never heard Adam make that sound before
John C that Taylor’s face😂😂
Aye when u have trouble bleeding use a refiller and pull a vaccume on the coolant and when u refill that away it usually does pretty good
Prolly should use an impact drill on your parts. It’s a good way to snap screws
Note to all moms out there. DO NOT give your petrol head son your car when your not there
I bursted out in laughter at 15:40 XDD
Damn ur pulling out some motion auto tv length videos
And no primer
And it sucks
Well he doesn't have to step away to dip the wick anymore so he's got more free time.
Back when it was new, this car was better than most. I remember when this came out. I’ve always wanted one but about time I get one, it’ll be super rare. And also you know this car came with a v6 right? That v6 was pretty fast for back then.
adam i used to work at starbucks and my FAVORITE drink was a venti vanilla bean frapp with a double shot of espresso mixed in. absolutely sublime, bro.