Normally UPS isolates its Neutral input and output; Connection in this video effectively shorts them. Is there a downside in connecting them like this?
Is there a video that can automaticly switch to ups ? So instead going through circuit breaker L goes directly to switch (why not through circuit breaker then the switch) ? What if I have lights on 2 c.breaker and I need one outlet via ups ?
This circuit works automatically when the UPS is connected and turned on.Besides mcb is not used because the supply is taken from the db board and connected to.
So when the mcb is in the position for the UPS, the light will work because there is power from the main power supply through the ups and if doesnt, from the battery through the ups, and if the mcb is in the position from the main power supply then the ups is outside circuit and could be replaced (battery or device replacement) , is that right ? one more question, on the wall socket where the UPS is powered, if it is a EU plug, does it matter which wire is N and which is L in ups input (because this plug can be plugged in straight or upside down) ?
now.... finding someone smart to fit this in NZ.. great video by the way =
Thanks friend...😍😍😍😍😊😊
I need to auto change changeover switch. Thank u. God bless u
Ok bro thanks...i will create your video.
Good video..👍
Thanks ..🤗
Good job .😃😃
Thanks...😍😍
thanks ❤
You're welcome! 😊 I'm glad you enjoyed the video. If you have any more questions or comments, feel free to share them.
Normally UPS isolates its Neutral input and output; Connection in this video effectively shorts them. Is there a downside in connecting them like this?
Good idea thanks your comment..
Ups ke neutral rccb trip ho jayega na
Ok friend thanks..❤️❤️
Naya ups ko do char led bulb room me jala kar dikhaye
I will create this video friend..thanks
How many light use this ups power..?
The amount of light can be determined by the output power of the ups. LED bulbs can be used in large quantities
What happen when both main power and ups on 🙄 is it damage to ups ?
Main power and UPS power on but no problem because change over MCB is out there is only one phase.
Is there a video that can automaticly switch to ups ?
So instead going through circuit breaker L goes directly to switch (why not through circuit breaker then the switch) ?
What if I have lights on 2 c.breaker and I need one outlet via ups ?
This circuit works automatically when the UPS is connected and turned on.Besides mcb is not used because the supply is taken from the db board and connected to.
You can use single change over mcb for both light circuits. Otherwise you can use a 2 pole change over mcb.
So when the mcb is in the position for the UPS, the light will work because there is power from the main power supply through the ups and if doesnt, from the battery through the ups, and if the mcb is in the position from the main power supply then the ups is outside circuit and could be replaced (battery or device replacement) , is that right ?
one more question, on the wall socket where the UPS is powered, if it is a EU plug, does it matter which wire is N and which is L in ups input (because this plug can be plugged in straight or upside down) ?
Lot of wire west failed
Thanks your comment..
The ups can be installed near the DB Board. Then the amount of wire used will be reduced.
how to increase the power of the UPS like for running fridge and AC units plus lights and everything
ruclips.net/video/kZw2NcZuQEE/видео.html&feature=share&EJGixIgBCJiu2KjB4oSJEQ
Watch this video.. a UPS can be connected to the generator connection point. It should be a UPS of high kilowatts.
What part of the ups should be changed to make it high power
When ups power is connected to the same neutral bar, there is no trip.
When the power is supplied from the main supply, the main supply goes through the ups so there is no trip.
@@ELTronic3 ok thanks ..😍
Wrong connection
What is the wrong this circuit..?
You linked diract en supply and Ups supply no control or byepass two way switch wrong diagram