Your timing is definitely off, keep in mind the balancer has a rubber insert on these engines, it will spin and your timing marks won't be right. From my experience it's a pretty common problem on the 262. When ya overhaul one it's easy to remark the balancer at TDC but can be a bit of a pain when it's in the tractor, totally worth it though lol. Great video I'll be watching 👀 👍
It seems to run as bad as it did with its original pump and injectors. Pull valve cover and check valve springs for tension. It seems to be worse at higher rpm. Injection timing is constant where ever it is set. Smoke and loss of power yes but not a miss. Irregular smoke pulse is not timing in my experience. Just my thoughts. Ian🇦🇺
I say open injectors on top screw plus when running at 1000 RPM close top screw in fire order of engine and fuel filters bleed to air out to also add Automatic transmission 2 or 3 GM type in fuel tank too ! When do bleeding in injectors plus pump also need add new thermostat too when put new water pump to and do 60 % green antifreeze also 40 % water!
Your timing is definitely off, keep in mind the balancer has a rubber insert on these engines, it will spin and your timing marks won't be right. From my experience it's a pretty common problem on the 262. When ya overhaul one it's easy to remark the balancer at TDC but can be a bit of a pain when it's in the tractor, totally worth it though lol. Great video I'll be watching 👀 👍
just come across your channel, love it very interesting what you do , looking forwards to watching lots more
Check your valve train, you could have valve hanging up or broken/lazy spring.
Enjoying 😊
It seems to run as bad as it did with its original pump and injectors. Pull valve cover and check valve springs for tension. It seems to be worse at higher rpm. Injection timing is constant where ever it is set. Smoke and loss of power yes but not a miss. Irregular smoke pulse is not timing in my experience. Just my thoughts. Ian🇦🇺
Great video! Good job
will a d17 engine bolt up to wd45?
I doubt dad would want to pay for even though he wants a wide front for his D17. What would that one cost. I assume it has power steering. Nice video.
I say open injectors on top screw plus when running at 1000 RPM close top screw in fire order of engine and fuel filters bleed to air out to also add Automatic transmission 2 or 3 GM type in fuel tank too ! When do bleeding in injectors plus pump also need add new thermostat too when put new water pump to and do 60 % green antifreeze also 40 % water!
Yea timing still a bit out ?? Not my strong point ,you'll get it ,nice paint job
Looking for you on eBay. What do I look for. Thanks
ebay.com/usr/b0wmanstrac_10
Needs a wee bit more timing work.