Thank you so much for the kind words! I'm glad you like the style of the channel, and it's awesome to hear the Vero board project was exactly what you were looking for. I appreciate your support and hope you find more helpful content here!
Alhamdulillah, terima kasih banyak! Senang sekali bisa menyampaikan informasi dengan cara yang jelas. Saya akan terus berusaha berbagi ilmu. Semoga bermanfaat! 😊
Thanks, friend! For maximum distance, I recommend using a dipole antenna or a Yagi antenna, as they can significantly improve your range. Just make sure to configure them properly for the best results! Much love, bro! ❤❤ Stay tuned for more! 🥰💪
Unfortunately, pre-soldered versions of the board might not be readily available. You may need to solder the components yourself, or you could look for a local service that can solder the board for you
Wa Alaikum Salam, brother! Unfortunately, pre-soldered versions of the board might not be readily available. You may need to solder the components yourself, or you could look for a local service that can solder the board for you.
@@YellowPurple hello , today i put my nrf mod onto my stickc , i find the range is poor. 1 to 2 meters the bluetooth is cut off , but further away its distorted but still working
I got the cc1101 and nrf24 but both Modules dont not work no matter what I do, I have already checked the connections but still nothing it just says not found
That's a really interesting project idea! Capturing signals with the ESP32, saving them to an SD card, and then retransmitting them with the CC1101 sounds like a great challenge. I’ll definitely consider exploring this in a future video! Thanks for the suggestion! 👍
Hi! That sounds like a great project! I’m considering making a video on ESP32 WiFi deauthentication with an OLED display soon. Much love, bro! ❤❤ Stay tuned for more! 🥰💪
Yeah, Flipper Zero looks awesome, but it's a bit out of my budget right now, bro! It's pretty expensive. Maybe someday! 😅💸, Much love, bro! ❤❤ Stay tuned for more! 🥰💪
BUY : s.click.aliexpress.com/e/_DEVjaAh
The style of your channel is very different, it's good.
Thank you for teaching the project with this Vero board, it was what I wanted.
Thank you so much for the kind words! I'm glad you like the style of the channel, and it's awesome to hear the Vero board project was exactly what you were looking for. I appreciate your support and hope you find more helpful content here!
maasya Allah, tanpa kata-kata tapi kok bisa jelas gitu ya...salut...apalagi ga pernah pake musik...keren...keep sharing the knowledge, mas!
Alhamdulillah, terima kasih banyak! Senang sekali bisa menyampaikan informasi dengan cara yang jelas. Saya akan terus berusaha berbagi ilmu. Semoga bermanfaat! 😊
Wonderful thank you my friend!
You're very welcome! Glad you liked it, my friend! 😊
will there be a more detailed soldering scheme?
Is there a way to add a battery to this
Do i have to buy both antenna boards or do i just buy one
Very good work... Following from yemen ❤
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
After u soldered the headers into the board, what did you do? The wires just spawned there lol
Same thing i was going to order soldering iron but then i've seen the cables that are just spawned out there so i js cancelled my order
ruclips.net/video/ES25ihpAerY/видео.html
Where can I get the diagram of the pcb form
Congratulations friend, which antenna do you recommend to reach the maximum distance with a good configuration?
Thanks, friend! For maximum distance, I recommend using a dipole antenna or a Yagi antenna, as they can significantly improve your range. Just make sure to configure them properly for the best results! Much love, bro! ❤❤ Stay tuned for more! 🥰💪
@@YellowPurple Is it possible to put an SD card in this project? Could you make a tutorial for us? Good luck, friend.
is there any way to get a board like this but pre- solderd. i dont have a solderer. Thanks
yes , i want one too
Unfortunately, pre-soldered versions of the board might not be readily available. You may need to solder the components yourself, or you could look for a local service that can solder the board for you
where did you get these cables?
+
ruclips.net/video/ES25ihpAerY/видео.html
salam brother , can i order such a board soldered and ready to connect ?
Wa Alaikum Salam, brother! Unfortunately, pre-soldered versions of the board might not be readily available. You may need to solder the components yourself, or you could look for a local service that can solder the board for you.
@@YellowPurple hello , today i put my nrf mod onto my stickc , i find the range is poor. 1 to 2 meters the bluetooth is cut off , but further away its distorted but still working
Is it support 5GHz WiFi?
please, make a tutorial of the cables, they just suddenly spawned
ruclips.net/video/ES25ihpAerY/видео.html
can you also make one for cardputer?
ruclips.net/video/mbAgfB75xso/видео.html
@@YellowPurple thank you so much :D
Now can it jam Bluetooth speakers?
Top dás Galáxias 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👍
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
can i connect 2 or 3 antennas at the same time? If how?
Do you need to plug the module in an outlet for it to work?
Hey! Is it possible to use the small flat one, with built-in antenna, and does it have the same wiring? Thanks.
I got the cc1101 and nrf24 but both Modules dont not work no matter what I do, I have already checked the connections but still nothing it just says not found
Where can i buy stuff like boards or wires?
s.click.aliexpress.com/e/_DELouaZ
Aliexpess
i bought the cables for 80p
ruclips.net/video/ES25ihpAerY/видео.html
@@YellowPurple ??? Also I just need female and male cables right nothing else
Why are you using the vero board ? Can’t we just add the antena with the wires on the m5 stick ?
You can, he did this just for speed and comfort😊
BUY 3x7 cm Double Side PCB :
s.click.aliexpress.com/e/_DFRTVbJ
Where to buy the cables that are on the down side
These cables are custom-made by me. I shorten the cables and make slight modifications
ruclips.net/video/ES25ihpAerY/видео.html
Hi could i ask how big was the vero board you used in the video??
30mm*70mm
is it normal that it will really warm
Which one did you prefer?
cc1011
What wire are you using?
Male to female? Male to male? Female to female?
Pls answer me
@ketuaoyen6039
Male to female and Female to female
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
@@YellowPurple thx man 🙏
what is the difference between them
What is the wiring on the buttom
Pins
which size of pcb ??
BUY 3x7 cm Double Side PCB :
s.click.aliexpress.com/e/_DFRTVbJ
Can i jamm ble signals with this tools..?
What type of wires do you use for the pin connectors
ruclips.net/video/ES25ihpAerY/видео.html
Hey, great vid.
I was wondering if you still have an aliexpress link to the nrf module or wil a regular LNANRF24 work?
Thanks!
The wires what are those
where can i search schema, for this
@Yellow Purple
does anyone now how to add a bigger screen to the m5 stick
is it possible to add a micro sd module and run m5launcher?
ruclips.net/video/1M5tol5SP_w/видео.html
Does bruce support on m5 stick c plus
Bruce may work but I’ve seen posts on Reddit saying it doesn’t work very well
Спасибо друг!
Can someone help me with connection because Im don't know how to do that
so will you be able to turn of projectors and tv's with this
no thats a ir sensor
ruclips.net/video/TQuyaNz29P4/видео.html
very good
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
can you do a new video tutorial how to conect all
My nrf24 won’t work. Can someone help?
Do i have to program cc1101 to use
no
Price of cc1101 Module ?😅
Brazilian real is about 20 reais, in dollars it is 4
@@Nw4sk link please
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
I want m5 device where do I bye
Aliexpress has it
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
s.click.aliexpress.com/e/_DEVjaAh
Could you post a soldering scheme for this ?
What i need and witch cables ?
dupont cables
ruclips.net/video/ES25ihpAerY/видео.html
What are these boards
3x7cm Dot Veroboard DOUBLE Side
s.click.aliexpress.com/e/_DCEjEOt
nice
not work for me😢
Make please esp32 capture signal then save it to sd card and transmit with 433 mhz cc1101 as replay that captured signal.
That's a really interesting project idea! Capturing signals with the ESP32, saving them to an SD card, and then retransmitting them with the CC1101 sounds like a great challenge. I’ll definitely consider exploring this in a future video! Thanks for the suggestion! 👍
@@YellowPurple Thank you soo much
MAN I NEED WIRING DIAGRAM PLEASE!!!
Detailed wire connection instructions are shown inside the video
@@YellowPurple no they arent. please make a detailed video about soldering the cables
Hi Anna ESP 32 wifi deauthication with OLED display
Hi! That sounds like a great project! I’m considering making a video on ESP32 WiFi deauthentication with an OLED display soon. Much love, bro! ❤❤ Stay tuned for more! 🥰💪
Send link to male female connectors.
ruclips.net/video/ES25ihpAerY/видео.html
Pleas next modul
M5stack C-BACK NB-IoT(SIM7020G) global version
Much love, bro! ❤❤ Stay tuned for more! 🥰💪
@@YellowPurple please activated subtittle all languange in every video.... 🙏
is mine for namm maniaaa hiiiiiiiiiiiiiiiiiiii
You should buy a flipper zero
As if someone is actually gonna buy it. 300 bucks? Nuh uh
Yeah, Flipper Zero looks awesome, but it's a bit out of my budget right now, bro! It's pretty expensive. Maybe someday! 😅💸, Much love, bro! ❤❤ Stay tuned for more! 🥰💪
@@YellowPurple im broke too elhamdülillah
If I could afford one
@@Boncreate it is not even 200