Setting a Utility Pole with a Tractor
HTML-код
- Опубликовано: 26 апр 2020
- Today we are installing a used utility pole. We are planning are using it for a dusk till dawn light. We will be using a tractor with a front end loader to install it. We also use the tractor with a pole hole digger to auger out the hole for the utility pole to be set in. We try our best to make this job as safe as possible with the equipment we have.
Our Facebook page: / countryviewacreshomestead
E-mail us at: countryviewacreshomestead@gmail.com
Send Mail to:
Country View Acres
P.O. Box 469
Robinson, IL 62454
We live in southeastern Illinois on a 41 acres homestead. We just finished building our log cabin overlooking our pond. We are trying to grow our own food and raise livestock. Follow us on our journey living the rural life and developing our property and becoming more self sufficient.
#utilitypole
#lightpole
#countryviewacres
My local electric utility just installed a new utility pole in the rear part of my property. I watched the installation from the beginning (digging the hole) to the end (transporting the pole to the hole and then standing it up and putting it in the hole). They did not do what you said regarding grabbing the pole at the top of with a bucket truck lift. What they did do was use the same piece of equipment to did the hole and raise the pole and drop it in the hole. After digging the hole, the auger bit retracted the auger so that it was stored parallel to the arm. Then they extended the arm and moved it over the middle of the pole. Then they retracted a cable that was on the extended arm and tied it to the center of the pole. Then they raised the pole about five feet off the ground and a second worker moved the pole so that one end of the pole was over the hole. They slowly lowered 1-2 feet so that one end of the pole could then be angled into the hole. Once it stated going into the hole, the equipment operator stated raising the pole and it slid right in the hole. The cable remained attached until the pole was level.
You remind me of me. Not that I have ever tried to plant a utility pole but most of my life I have worked alone so I had to use my head and dream up ways to do a two or three man job by myself. God has given me a good mind and I see He did the same for you. Putting the 2 by 6 in the back of the hole was a major idea to keep the pole from getting stuck in the back wall of the hole. Good job.
Hi...... Evan, thank you for sharing your video homestead 👋 bye 👋 bye 👋 bye 👋 🎥👍👍👍
That took some "HAIR" to attempt by yourself... The ESR for the private property pole is a 25' pole with 5' in the ground and backfill compacted to specification. Also, ESR spec calls for a 6' -3/4 PVC pipe permanently attached to the bottom of the pole with a glued cap at the bottom and a removable cap at the top for a tape measure to be dropped in to verify your depth. Excellent content.
Scaffolding dig hole deep and a tractor. Ree bar fence post chicken wire 5 bags dry cement for anchor
Some farmers tar the end of the pole before setting it to prevent rot....used motor oil works too.
that is a good hint, the motor oil works great
10% plus two for hole depth. ⚡️⚡️
Very nice attitude displayed. May suggest a puff or two of air in the front tires.
I'm glad you slept on it and gave it some thought, AWESOME JOB. 🇺🇸👍🇺🇸👍
Good job
done many a pole like this nice job...if you do it again...put some sand then crushed stone at the bottom and mix stones in with the dirt also at the top widen the hole a bit ours have been up some as long as 60 years :) my grandfather put them in be safe and healthy
Future reference, you can wrap a chain around the center of the pole and hook it to your loader bucket. That's how we set all of my building posts and they were over 20 feet.
i LOVE YOUR TENACITY AND THAT YOU THINK OUTSIDE OF THE BOX TO SOLVE PROBLEMS!
10% of pole length plus 2ft is what we use at the power company... Realistically if the pole is 25ft then you only need It 4 1/2 feet deep... But very nice video and well done. I love the creativity!
You guys are the hardest working people on RUclips. Your place looks better and better every time I see it.thanks for sharing🐓🐓🐓
10% of the pole height+2 ft is the minimum set depth for Fortis Alberta but it will depend on your soil condition and pole class too.
During the first attempt, I could literally see the pucker factor engaging.
After 2 attempts with a strap, i used your method and got it right the first time. This really works with little effort, Ok the hole and trench part is work.
I would have done it exactly the way he did it except instead of being under it, I would have used a strap and pulled it up into the hole so if something goes wrong, it doesn't fall on me or the tractor.
Safety first! My dad ran over himself with his own tractor once.
Do you have a tree or something to use a come along
My father once flipped his AC D-17 over backwards when the loader was up high on a hill. It bent the exhaust pipe but after uprighting it, it was ran just fine. He said that lack of seatbelts saved his life.
I was happy to see the self preservation kick in. Good job done well.
Hopefully you got all the metal picked up before the mower finds it. Enjoyed your video. Glad you thought it though!
Exactly what I was thinking...picking up the metal.
You could have also put a short tow strap, chain or heavy duty rope around the pole and hook it back onto the arms of the tractor behind the bucket so that there is no possibility of it slipping off the tractor bucket. It's basically a choker line. We use them on pipes in the oilfield when it's moved by a crane.
Always best to put plenty of thought into a complicated job before you start . Cuts down the risk of accidents and mistakes especially when working on your own .A good job well done !
10%+2ft is the standard minimum depth set by RUS for electric utility poles. More depth is better, especially for shorter poles like this and in cold climates that have deep frost. The most important part in keeping the pole plumb is compacting the backfill. Dry concrete mix topped with the 2-ft of the soil that came out of the hole works well. Always a little sketchy setting poles with a front loader like this!
Hooray....I'm so happy it went into the hole. Great job.
Worked for an electric utility for 47 years pole setting depth is calculated at 10% of pole length plus 2 feet.
Why isn’t it necessary to put concrete in the hole around the pole like a lot of people do when setting smaller posts?
@@triciahill216 The reason not to put concrete around the poles is that the chemicals in the concrete will rot the wood faster than in natural ground, plus the work to dig out the concrete when the pole rots.
@@duramaxpete5200 Thank you.
Very nice job and nice improvisation. You are living the dream!
Whew, I held my breath a time or two....good job as usual :)
Growing up I put poles like that for signs, the secret as I was taught was to use the 2x6 in the hole, then walk the pole in the hole with the end of the pole sliding into hole, the 2x6 is the leverage point.
For future reference, put a pretty good taper on the bottom end of the pole so it goes into the hole WAY easier.
LOVE Y'ALLS Country life!
I had to laugh at you maneuvering the pole between the trees. You reminded me of a dog going through a doorway with a stick!
Thank You !
I really enjoyed that.
Cheers
Those three point augurs have to be the most aggravating tractor attachment...I have one, and it's done alot of work, but it causes alot of aggravation too.
You did one hell of a job on that with what you had to work with. This is one of my favorite channels. You have such a nice piece of property. I would love to live out in the country. God bless you and your family.
Great job man... Way to be creative and even more important safe.. Thanks for sharing.
At work I would stick one fork into the pole and pop it out using a forklift
Back in the "olden days", people did not have access or could not afford every tool at their disposal in order to do a job. Ingenuity took over, and self-help tools were invented on the spot. We used to call it jerry rigging. Good job in taking what tools you had and figuring out how to do it safely. Smart Man!
Good video but the next one you put up dig hole 3 ft deeper place a few big rocks then gravel in that 3ft section so water will drain away from the bottom of the pole better. Also seal both of the ends with cheap roll on bed liner will extend the life of the pole. Also if you can or know someone who can weld you can make a pole cradle to go end of your forks to make it easier to lift and raise and set the next one it is two bars that bolt clamps on the forks the bars have free rolling pipe the hole length of bars and ur forks keep it from going to far side to side but other than that you did everything perfectly proud of you sir
A country boy will survive 💪💪 stay safe & god bless ..
Power poles are set at 10% (length of pole) + 2 feet. At least in Florida anyway.
We used to clean up old oak walking beams from old pumpjacks that were saturated in crude oil by dragging them down a gravel road and then through a grassy field to polish them... They looked like new when we were done with them
Great job!!!
Is there anything you can’t do ? I was so glad when you stopped and said you were going to think about this. Also glad you realized you were alone and how dangerous that was. You have put so much work into that place , it looks ten times better than it did when you bought it. You and Rebecca work so good together.The Lord will reward you and bless you for your hard work. I am always looking for more videos to see what you will tackle next. You are a good man Evan, and Rebecca is a good lady and helper.I pray for many blessings for you.
kubota tractor has more lifting reach height wich is nice
Amen to ALL that! God bless 'em!
wow....good job, liked that you took safety over just getting it done.
I worked in high line for years. A good rule of thumb to remember (based on the soil you have) is the rule of 5…take the length of your pole and divide by 5 and that’s your hole depth. A 20’ pole a 4’ hole, a 25’ pole a 5’ hole, 30’ pole a 6’ pole…
Next time just ratchet strap the pole to your bucket in the fully dumped position with 4 to 5 ft of the pole under the bucket and tractor, roll the bucket up over the hole and slowly ease the tractor backwards catching the end of the pole on the edge of the hole, once vertical lower the section into the hole. straighten as necessary. pitch and pack the hole with tractor is holding it steady. smaller tractors may require a rear counterweight.
Thanks Evan. Don’t be afraid to wear a hard hat. Lots of jobs on the farm can result in a head injury.
Hole depth should be ten percent of the pole length plus two feet, but bever less than five feet. Your five foot hole is fine.
I always enjoy everything you do to upgrade your homestead. Looking awesome as usual ❤️ Thank you for sharing
yep that was fine maneuvering!
I was thinking about putting the 2x6 in the hole and instantly there it was...lol. I think you did it perfect.......good job Evan
Great project. Perfect tips for my up coming project, thanks. Have a wonderful, and Blessed day.
Thanks for sharing with us Evan. Too bad you couldn’t save the bolts, they become usable for so many things around there. Fred.
Those old bolts are useful for drawbar pins if its not a major load you are pulling - light weight stuff only.
Helpful tip - I know in some parts of Canada, 10% of a 30-foot pole goes in the ground with 2 feet below frost = 5 feet. However, you are right about 6 feet deep. In a perfect world, the last foot is for crushed rock or limestone about 8 to 12" for drainage and to help with stabilization over time. You did a fanatic job, pat yourself on your back
Super solution. This is getting exciting!
This was a unique project to watch. Good for you to pause and rethink how to do it safely. Finished project looks great!
We put one in without any equipment that was as big at the bottom as yours and 18 ft long for a power service pole for a mobile home. Took 4 men to stand it up... Heavy job for sure. We started lifting at small end and just walked it up... We were very happy to finally get it in the hole... Lol
Nice job setting that pole. Safety first. Really enjoy your videos.
Hi used to be a lineman for AT&T and we would set a 25 foot pole 5 feet in the ground
Good to hear. I should be good. Thanks.
Straight as an arrow! Good job!
A great example of your ' problem-solving skills', excellent job well done. I thought when you drove down your driveway with the pole, it was going to be a classic comedy moment, but NO, just great driving! Thank you for sharing, I look forward to your videos.
Clever man !! well done Evan, very ingenious of you, thinking of the way to get the job done safely.
Great job, the trench really seemed to help.
Wanted to see the installation of the light.
JudithB Our electric coop replaces poles on a 20 yr schedule guessing. I had them leave the old pole and they brought the next one they changed out too. The plan is to use sections to replace old ties on my fence line and plant sections to make a platform for 275 gal water tanks on the north end of my barn. The east and west side will have gutters to feed the tanks. The tanks will feed a drip system in my gardens! Lots of uses for those old poles and saves the electric co from hauling them away. Have you thought about putting a roll bar on your tractor??? Great video as usual!
Two thumbs up Evan, it worked out perfect.
Good job!
Ya can always move the pole around ! Not that difficult !
I admire your forethought for safety and nice to see taking a breath and thinking it through well done!
I am so pleased you saw the danger and took safety measures. Lots of farmers don't.
Like the tractor brand
Good day Sir, you were great on taking the time to analyse the danger of that situation. Yes re thinking is taking the time do analyse to eliminate potential incoming danger !!! Keep up the good works Sir !!! Cheers ( new subs !!! )
Great job, enjoyed your skills on the tractor weaving in an out of the trees,Stay Safe
Thx
Good job Evan.
Good job and glad you figured out a way to do it safely. good idea on the 2x6!
Great job
Good Job but there is always more than one way to do something, reminds me how we used to apply a little Boy Scout know how and rope craft to put in our Totem Poles at Camp. 😊
I used to run with a rescue squad in a farm-filled county, and a lot of our accident calls were tractor calls. Glad you changed your approach - KEEP SAFE!! Your place is really coming along - looks great!
Great job !! that worked out really well 👍🤠🍻
You need three guys with ropes Evan to keep it centred just like they used to raise the big top circus poles.
Great job Evan. With your limited equipment, you did an excellent job.
Nice job, that is how I do it.
Excellent job Buddy. You know what I learned from this video? The Tractor! Look what you can accomplish with this old 2 wheel drive Tractor. A little time, a good head on your shoulders and you can conquer a great deal. Was this a gas or diesel engine? So I must ask this question for your viewers. Do we need enclosed cab Tractor's with heat and air, twin pedals to go forward and back? Stereos and air ride seats? Yes they are super nice and very comfortable. I guess if money is no issue then there's no reason not to have it. Now for all day farmers, cutting and bailing, I think they deserve it. Thanks for sharing. Mark.
That was well thought out 😊😊😊
In my early 40s, (I'm 62 now.), for my homestead, I hand dug a hole 2 feet by teen feet. Then set a 35 foot pole in that hole. For my main power pole. On my own. By hand. No equipment available. Just had to dig out the side of the top of the hole a bit, guide the end of the pole into that, and pick up the end of the pole and keep walking underneath it. Yeah, there was a point there where I thought it was going to crush me! But I got-er-done!
Ok, I posted this before I saw that you also cut some of the side of the post hole out, so the pole would catch on the other side. Great minds! When you have to get something done by yourself, you just do what you have to! (Wish I had had a tractor! LOL)
Save yourself some elect Bill money, put in a solar dusk til dawn light along with a standard light that you can turn on and off, solar light will be for security and The regular light will be for late night work related stuff. When regular light is not in use your solar security light will turn on for motion related stuff. (Add a couple trail cams for recording purposes if u feel their is a threat of some sort).
I have 6 poles to set, the trench and the backstop were brilliant! Thanks for sharing
good job.... nice light pole....
Good thinking and good job. Stay safe!
If your iffy about the depth. You can make up the depth on the top side by pilling rocks and dirt to the right requirements. As long as the slop does not exceed 45 degrees.
Nice job!
Smart install. Anxious to see the light mounting. I was waiting for you to pre-drill the mounting bracket before raising the pole but figured you know best. Good video. Thanks.
Don’t forget those small metal pieces in the lawn when you cut it.
LOL
Good job 👍 good thinking safety first we all need to slow down a bit think ahead before do any projects
very informative but please use hearing protection! You won't realize that you are damaging your hearing until several years later.
Job well done
great job!