Some body needs to make a an off set knuckle. It would help with the camber and caster issues from idfs. Cad and a milling machine is all a guy needs to build anything on your mind. Great build so far.
Was going to post on the other vid but work turned on the OT thing so didn't get to it before this one came out. On the other I wouln't call it a fail I would call it Rev A. I like Rev B much better it works the way it/you wanted it to. Reading the feed back here you're getting some good ideas on how to get the steering sorted. Love this channel and the work you do. Have a body that needs paint. Going to try that dish soap thing and see how it turns out if it gets warm.
I use those transmissions with my builds also, but I use another 3 to 1 gear reduction between motor and trans. and a 2 speed transfer case. My builds are heavy, with hardbodies between 15 to 28 lbs and it helps with speedcontrol when crawling.
Thanks for your content....I have a question...since most chassis rails are flat stock, either metal or CF, what made you decide to work with tube stock? Was it just to have a more solid chassis or more material to work with?......Thanks again.....✌✌
@@WafflesRC-pb4nt Cools, thanks for replying, makes sense. I've thought about making my own chassis as well using aluminum flat stock. But haven't made the jump to do it. Just unsure on measurements to go by. But watching your vids has kinda opened me back up to the idea.. thank you.
Looks really good next time you do anything like that it would be easier and just as functional to use a single upper link and just make a Y arm for the lower it would make it a lot easier to get the tires lined up without a jig the arms u made would definitely be extremely hard to get 2 of the same arms
great content! what are the axles your using now, the ones in your mud truck? can you put a link? typically ordering from the same seller insures they are the right axles and I will get the same results as you with the quality.
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
In regards to Steering they make a pulley system that can mount on the front and allows you to mount the servo anywhere
Nice work, looking really good.
Awesome job, nice proyect and colection, a hug friend👍💪😜👋
You cannot keep a good man down. Thanks once again for sharing.
Brother you are awesome 😎. Thank you for your help and guidance. Keep on
About time someone makes a IFS that actually works. I cant wait to see how this comes out. Nice 👍🏾
Dude that looks pro built now! Can't wait for more progress, love the suspension on the Escalade. Keep up the good work and thanks for sharing.
Some body needs to make a an off set knuckle. It would help with the camber and caster issues from idfs. Cad and a milling machine is all a guy needs to build anything on your mind. Great build so far.
Welcome to building from scratch, learning cure. Looks good
Was going to post on the other vid but work turned on the OT thing so didn't get to it before this one came out. On the other I wouln't call it a fail I would call it Rev A. I like Rev B much better it works the way it/you wanted it to. Reading the feed back here you're getting some good ideas on how to get the steering sorted. Love this channel and the work you do. Have a body that needs paint. Going to try that dish soap thing and see how it turns out if it gets warm.
Man much love and props frome Nova Scotia Canada. I am at the egg of my seat to see how your IFS turns out.
Thanks for sharing your videos with us.
I use those transmissions with my builds also, but I use another 3 to 1 gear reduction between motor and trans. and a 2 speed transfer case. My builds are heavy, with hardbodies between 15 to 28 lbs and it helps with speedcontrol when crawling.
As always awesome job you patience has paid off.i like that alot
You should put links to the parts you use. It would be nice if you could do some affiliate marketing to help support the channel.
Man u make some bad ass crawlers I wish I had that talent my hats off to ya thanks for sharing
Nice second attempt! I know all about the frustration of things not working the way you imagined. This is looking stellar tho!
I’m gonna be posting a vid of the custom scx10 I made ur Silverado inspired me
Hell Yeah Brother 🇺🇸🦅
This is going to be so freaking rad, thanks for showing this to us!
This is good rc channel 👍
I mean best 😁
Thanks for your content....I have a question...since most chassis rails are flat stock, either metal or CF, what made you decide to work with tube stock? Was it just to have a more solid chassis or more material to work with?......Thanks again.....✌✌
Honestly, it was because it was easy to find, and I knew that it would be strong enough to take a beating without bending
@@WafflesRC-pb4nt Cools, thanks for replying, makes sense. I've thought about making my own chassis as well using aluminum flat stock. But haven't made the jump to do it. Just unsure on measurements to go by. But watching your vids has kinda opened me back up to the idea.. thank you.
No problem at all!!
Love the tires what size are they and what name ? Awesome work sir well done
Ima need for you to get out your feeling and post it’s loyal people here that love the work and enjoy your videos you really need to post more ‼️
Dang been a whole week no video smh
Don't worry. Not lost in feelings. I just had some life stuff. I got one that will be out this Friday for you all
Did you use some drive shafts for front axles? 🤔 looks good! Glad my suggestions Helped if you read them
Waffle I love that you make everything from scratch but why do you make your rigs with such a high stance, surely this affects CG
Looks really good next time you do anything like that it would be easier and just as functional to use a single upper link and just make a Y arm for the lower it would make it a lot easier to get the tires lined up without a jig the arms u made would definitely be extremely hard to get 2 of the same arms
I'm going to say this bro keep going you got some traction keep it going
What wheels and rims are u running on the Silverado dually
Could you do a video on how you make ur links ?
great content! what are the axles your using now, the ones in your mud truck? can you put a link? typically ordering from the same seller insures they are the right axles and I will get the same results as you with the quality.
Thank you very much!! This is the link to the exact axles that are in the Mud Truck and the Escalade. amzn.to/4c1oemq
@@WafflesRC-pb4nt awesome man thanks!
I wish I could make a rc car 😭 I love watching ppl build them but I can’t they are expensive