Previous month I was able to withdraw my first five figure income ever!!! I've been working for this provider online for 2 years now and I never been happier... They are paying me $95 per hour, and the most desirable thing regarding it is that I am not that tech-savvy, they only asked for standard understanding of internet and elementary typing skill...Great thing about it is the more time I got with my kids. I am able to spend quality time with my relatives and buddies and take care of my babies and also going on vacation along with them very often. Don't skip this chance and make sure to act quickly. Check it out, what it is about... *acttoday48.com*
Can you make a video for how you made your circle cutter tool with a scalpel, It looks fantastic. Also your technique for PCB toner transfer is very interesting, it could help people if you also make a video on that. Best regards.
У меня есть подробная статья о производстве печатных плат и видео, иллюстрирующее это. Нажмите кнопку перевода в верхнем левом углу сайта: oldoctober.com/ru/thermal_transfer/ oldoctober.com/ru/lut_pictures/ oldoctober.com/ru/old_cartridge/ ruclips.net/video/qGdgU2N-Pwo/видео.html ruclips.net/video/sJp9akSHWRI/видео.html Что касается нарезки кругов, я не думаю, что эта тема может заинтересовать большое количество зрителей. А для тех, кому нужно такое устройство, достаточно один раз увидеть его, чтобы повторить его на основании имеющихся у него материалов.
Идея шикарная !! Обязательно попробуйте сварить кофе в гейзерная кофеварка. Ваша жизнь поделится на с этим девайсом и без . Там Кпд выше немного чем у классики .
very nice, but can you put the schematics + explanations or the principle also? You can insert a link to a picture in the description, instead of re-editing the entire movie. Thank you.
I like the design. It took me a moment to work out how the safety and switch off worked....Some things stare you in the face! ...Ohhhh! The only thing I would question is the value chosen for the enamel wirewound resistors? (What is 1E)? And how much energy can you shove through them considering they are water cooled. ie. How long did you take to heat the water. Don't imagine you ran it over 10A? I doubt it is as quick as my 1500W kettle! (Mind you if they were 0.1 ohm that would be 1500 watt, though I doubt that supply could deliver the required 120A :0)
_(What is 1E)?_ Heater resistance 1/2 = 0.5 (Ohm). 12² / 0.5 = 288 (watts). About the same power (300 watts) is my factory coffee maker. It does not warm for long. I just have time to set the table.
@@IurisWorkshop That's excellent. I think it would be fantastic to have a nicely styled one. I could see it being very popular. It's such a great idea. (I mean it looked fine for DIY but people who like their coffee are often fussy about looks too).😍 (ooh emojis). If anyone is interested the specific heat of water is 4200 joules per kg per degree C. Remembering a watt is one joule per second and that container held maybe 500ml (and a liter of water is a kilo) means to raise the temp by 70 degrees takes about 150,000 joules means it takes about 8 minutes..with a 300W heater.Though I think I overestimated the amount of water maybe it was half that thinking about it, so 4 mins for a cup. When I first saw it I was thinking it would take longer. That's pretty good. Hope my math was correct.
the way u r making coffee, [heating a local resistance, which is color coated] is harmful. Because when u r heating the water using those two resistors, the color from the resistance body can remove over time and can mix with the water and this is so much harmful to your body. Instead of that, use a pure good metal piece and heat that metal piece using those resistors and then boil the water, don't directly heat the water using those color-coated resistors. *OTHERWISE your design, efforts and simple inversions are awesome.. .*
Thank you for your concern! These are glass coated ceramic resistors. I don’t know if such resistors are now being produced. Previously, they were produced in the USSR. Currently, Russia produces similar ceramic resistors, but they no longer have a glass coating.
Wrong. That's not a coffee. That is just a coffee taste boiled water. You need minimum 10bar pressure to make coffee. You need a 10bar hot water pump attached to an aluminium coffee maker. This is how I ve made my 12v espresso maker. There is a removable valve on the aluminium coffee maker for stove. You take off that valve, and you add a tank connector 15mm bsp brass with a copper pipe 15mm and a hot water pump 100°C. That aluminium pot its a steam pressure resistant. You can even put a bicycle pump with a tyre valve on the pot....you boil the water and use the hand or foot pump to make 10 bars pressure. What you ve done here its just a 12v boiling element easy to buy it online 12v 150watts boiling element. I don't see the point for your video. Its a total waste of time. You thought you gonna make money from wiews. But is wrong. Instead of glass can....you need to use a safety container for hot water....a stainless steel can with screw lid or even a stainless steel bottle. When water boiling you can pump air with foot pump. Use your brain...if you wan't money from youtube wiewers. Go and take a sleep and next day do a proper project. Good night.
Thanks for the comment! I make coffee in this coffee machine: ruclips.net/video/acZd9czrLB0/видео.html I needed a home-made coffee maker to demonstrate a revolutionary source of energy: ruclips.net/video/7gZ_C-c7d0M/видео.html
I do very much appreciate that you distributed the water fairly evenly across the grounds
You work fantastic and I like your DIY machines,tools.
Keep with good work
Congratulations, I have rarely seen work with such good practices. Excellent.
That intro was really nice!
Love the build. Maybe I'll do something similar but with wood and brass
Previous month I was able to withdraw my first five figure income ever!!! I've been working for this provider online for 2 years now and I never been happier... They are paying me $95 per hour, and the most desirable thing regarding it is that I am not that tech-savvy, they only asked for standard understanding of internet and elementary typing skill...Great thing about it is the more time I got with my kids. I am able to spend quality time with my relatives and buddies and take care of my babies and also going on vacation along with them very often. Don't skip this chance and make sure to act quickly. Check it out, what it is about... *acttoday48.com*
Can you make a video for how you made your circle cutter tool with a scalpel, It looks fantastic. Also your technique for PCB toner transfer is very interesting, it could help people if you also make a video on that. Best regards.
У меня есть подробная статья о производстве печатных плат и видео, иллюстрирующее это. Нажмите кнопку перевода в верхнем левом углу сайта: oldoctober.com/ru/thermal_transfer/ oldoctober.com/ru/lut_pictures/ oldoctober.com/ru/old_cartridge/ ruclips.net/video/qGdgU2N-Pwo/видео.html ruclips.net/video/sJp9akSHWRI/видео.html
Что касается нарезки кругов, я не думаю, что эта тема может заинтересовать большое количество зрителей. А для тех, кому нужно такое устройство, достаточно один раз увидеть его, чтобы повторить его на основании имеющихся у него материалов.
That was awesome.
Is that coffee safe to drink, and does it taste good
Идея шикарная !! Обязательно попробуйте сварить кофе в гейзерная кофеварка. Ваша жизнь поделится на с этим девайсом и без . Там Кпд выше немного чем у классики .
Уже давно такую использую: ruclips.net/video/acZd9czrLB0/видео.html
Einfach schön !
very nice, but can you put the schematics + explanations or the principle also? You can insert a link to a picture in the description, instead of re-editing the entire movie. Thank you.
I like the design. It took me a moment to work out how the safety and switch off worked....Some things stare you in the face! ...Ohhhh!
The only thing I would question is the value chosen for the enamel wirewound resistors? (What is 1E)? And how much energy can you shove through them considering they are water cooled. ie. How long did you take to heat the water. Don't imagine you ran it over 10A? I doubt it is as quick as my 1500W kettle! (Mind you if they were 0.1 ohm that would be 1500 watt, though I doubt that supply could deliver the required 120A :0)
_(What is 1E)?_
Heater resistance 1/2 = 0.5 (Ohm). 12² / 0.5 = 288 (watts). About the same power (300 watts) is my factory coffee maker. It does not warm for long. I just have time to set the table.
@@IurisWorkshop That's excellent. I think it would be fantastic to have a nicely styled one. I could see it being very popular. It's such a great idea. (I mean it looked fine for DIY but people who like their coffee are often fussy about looks too).😍 (ooh emojis).
If anyone is interested the specific heat of water is 4200 joules per kg per degree C. Remembering a watt is one joule per second and that container held maybe 500ml (and a liter of water is a kilo) means to raise the temp by 70 degrees takes about 150,000 joules means it takes about 8 minutes..with a 300W heater.Though I think I overestimated the amount of water maybe it was half that thinking about it, so 4 mins for a cup.
When I first saw it I was thinking it would take longer. That's pretty good. Hope my math was correct.
زیباست
I love you videos!!! good life
Please can you give the circuit diagram and components list please
The scheme is in the video. Just click on the pause.
Que Increíble!
Mhh with tube outsider the water level yoi would obtain steam. Better coffe ;-)
Bit i suppose more dangerous :-)
1st like 🙂
Nice..
Comment like... Plesse.
Hu vrisy
the way u r making coffee, [heating a local resistance, which is color coated] is harmful. Because when u r heating the water using those two resistors, the color from the resistance body can remove over time and can mix with the water and this is so much harmful to your body.
Instead of that, use a pure good metal piece and heat that metal piece using those resistors and then boil the water, don't directly heat the water using those color-coated resistors.
*OTHERWISE your design, efforts and simple inversions are awesome.. .*
Thank you for your concern!
These are glass coated ceramic resistors. I don’t know if such resistors are now being produced. Previously, they were produced in the USSR. Currently, Russia produces similar ceramic resistors, but they no longer have a glass coating.
@@IurisWorkshop 😊🤓🤓 U r a kind person.. .❤️❤️
Wrong. That's not a coffee. That is just a coffee taste boiled water.
You need minimum 10bar pressure to make coffee.
You need a 10bar hot water pump attached to an aluminium coffee maker.
This is how I ve made my 12v espresso maker.
There is a removable valve on the aluminium coffee maker for stove.
You take off that valve, and you add a tank connector 15mm bsp brass with a copper pipe 15mm and a hot water pump 100°C.
That aluminium pot its a steam pressure resistant.
You can even put a bicycle pump with a tyre valve on the pot....you boil the water and use the hand or foot pump to make 10 bars pressure.
What you ve done here its just a 12v boiling element easy to buy it online 12v 150watts boiling element.
I don't see the point for your video.
Its a total waste of time.
You thought you gonna make money from wiews. But is wrong.
Instead of glass can....you need to use a safety container for hot water....a stainless steel can with screw lid or even a stainless steel bottle. When water boiling you can pump air with foot pump.
Use your brain...if you wan't money from youtube wiewers.
Go and take a sleep and next day do a proper project.
Good night.
Thanks for the comment!
I make coffee in this coffee machine: ruclips.net/video/acZd9czrLB0/видео.html
I needed a home-made coffee maker to demonstrate a revolutionary source of energy: ruclips.net/video/7gZ_C-c7d0M/видео.html
@@IurisWorkshop Красивая подача и классная работа! Спасибо! Привет из Санкт-Петербурга)