That's one heck of a spindle, Great work, Hope family is well. Man, your almost there,, couple of years invested, but what an experience to build and accomplish. Fantastic!!!
hello Sir, first time here and i love it. great spindle) but i just couldn't figure out what's that block with a spring and a ball in it is doing? what is it for?
I've been waiting for so long time to see what you have done now and I'm very impressed. I can't wait to see final result. Keep doing a great job Debby!
As I commented on other times, your work is impressive. How many hours fighting with steel! Thanks for teaching us all that work. I just hope to wait less for the next video. I was impatient. But the wait was worth it .
I anticipate one issue with your design: the quill feed handle being too low. The three handle levers will be hitting the part. Other than that, great build!
the first time I actually did not build a gearbox on the spindle because it used three handles, the handle I just made was only one lever, thank you for the advice, I have done this work before. Thank you brother
Hello Friend, very good job your machines are strong and massive Don't forget to color them, that way you will give them life. I want to ask you what is your profession with which you earn your living. Bye and good luck.
@@DebbyNovrinal Thanks for your reply. I am studying to be a Mechanical Engineer, I will graduate soon. You are very skillful and you will become an Engineer I believe you will achieve it. Good luck.
Hello engineer! I haven't seen you for a long time, I was sailing in the Atlantic. I enjoy looking at your work, good luck! P.S. How much have you done! Great job!
Not to be a buzzkill, but make sure that you always grind with a long enough piece of sandpaper and never bring the ends less than 80 degrees apart when sanding on the lathe. A coworker of mine lost his finger by bringing the ends together. The paper stuck to the axle and ripped his finger right off.
I'm just waiting for my brother, I'm working on it and it takes more or less time because all systems must work perfectly, you can see photos of my activities on Instagram
Let your kids watch all the footage you shot while building this, to stop them for scrapping the machines when your time has come. But you'r probably going to teach them how to machine, like any half decent father does.
Hello Mention the size of the pieces, it will be very good, please, if possible, send me a map of the standing drill in WhatsApp so that I can make it too, It is very expensive to buy and I have to make it, if you do me a favor I will be grateful to you
That's one heck of a spindle, Great work, Hope family is well. Man, your almost there,, couple of years invested, but what an experience to build and accomplish. Fantastic!!!
thank you brother
I happy to watch, THANK YOU FOR SHARING THIS ENORMOUS BUILD. CONGRATS
thank you brother
Olá meu amigo projeto fantástico e trabalho feito com muita dedicação!!!
Boa sorte abraço!!!
thank you brother
You continue to amaze me debby novrinal! you're also my main inspiration in building my machines. thank you! keep up the great work!
thank you brother
@@DebbyNovrinal I use my files a lot more thanks to you
you're welcome
hello Sir, first time here and i love it. great spindle) but i just couldn't figure out what's that block with a spring and a ball in it is doing? what is it for?
Just wait for the next video you will understand what it is used for, all milling machines and drilling machines use
Awesome work my friend. I have been binge watching the build and can't wait to see it finished. It is a work of art!
ok,thank you brother
I've been waiting for so long time to see what you have done now and I'm very impressed. I can't wait to see final result. Keep doing a great job Debby!
I will do my best for my brother all thanks for the support
Incredible. I love to see your postivity and engagement. Simplicity in how to create and solve problems. Congratulations Debby
thank you brother
Perfeito, ficou show excelente máquina com ótimo recurso de uso 👏👍
Thank you brother
What a job, just shows what can be done with basic tools and ingenuity, wasn’t sure what the removable block did
thank you brother
debby qual foi a redução que você usou para fazer o fine spindle adjustment ? 40:1 30:1 ?
You do some brilliant work cannot wait to see the finished miller
thank you brother
Круто, представляю сколько сил и времени на эту головку пошло. Молодец! С меня лайк и подписка.
thank you brother
Glad to see you back on RUclips. Great work, as always
thank you brother
As I commented on other times, your work is impressive.
How many hours fighting with steel! Thanks for teaching us all that work.
I just hope to wait less for the next video. I was impatient.
But the wait was worth it .
thank you brother
Nice job. We shared this video in our homemade tools forum this week 😎
Very nice 👍
thank you brother
Que show.Fantástico.
thank you brother
Your patient work is creating an everlasting machine. You inspire me to finish my milling machine build. Take care brother.
thank you brother
Really impressive. You're a natural! Keep up the great work!
thank you brother
Will there be a lock on the spindle quill? Otherwise, when the cutter is working, it will jump on the metal.
the pen lock on the spindle is my brother, pay attention to the box hole on the spindle, I will do that in the next video
@@DebbyNovrinal OK.
I believe in you, you are great!
Really an impressive and great work done 🔥🔥🔥
Thank you brother
Exelente trabajo👍
thank you brother
Jgn lupa istirahat maskuu. Salam dr lombok
Ok mas😁😁terimakasih🙏🙏
trabalho incrível parceiro, qual a espessura dessa chapa que vc usou na base do torno?
16mm/15mm
Vary vary good job thank you
Thank you brother
Thank you brother mujhe bahut kuchh sikhane Ko Mila aapki video dekhkar 🇮🇳🙏
Thank you brother
Can you please tell me. Why that block as to come out please and thank you for sharing this engineering work that you do so easily
I built with a manual system not with a cnc system, maybe all friends can understand
Great build I've ever seen
Thank you brother
Trabalho de muita qualidade parabéns
thank yhou brother
When will you finish this build? This was 8 months ago!! Hope all is well with you!
I'm working on it, in the next video too many trials please wait thank you
Its absolutely a masterpiece ❤️❤️❤️
thank you brother
Nice build! Do you use available blueprints of a mill, or designing your own as you go?
thanks bro, i designed it myself
You still must be inspired by existing mill designs. Your mill head looks a lot like Bridgeport.
That's right, I was inspired by a Bridgeport engine / with a factory engine but I designed it myself or my way
I anticipate one issue with your design: the quill feed handle being too low. The three handle levers will be hitting the part. Other than that, great build!
the first time I actually did not build a gearbox on the spindle because it used three handles, the handle I just made was only one lever, thank you for the advice, I have done this work before. Thank you brother
Hi friend
You do a good job what has happened for the last few months am waiting for the finished milling machine.
I'm thinking about a good way of milling my creations
@@DebbyNovrinal
Please finish the milling machine
ok brother,I'm working on it
Very professional work
Thank you brother
I was anxious for your video. from Brazil.
thank you brother
Hello Friend,
very good job
your machines are strong and massive
Don't forget to color them, that way you will give them life.
I want to ask you what is your profession with which you earn your living.
Bye and good luck.
thank you brother,
I'm a trader, I used to aspire to be an engineer but I haven't achieved it yet
@@DebbyNovrinal
Thanks for your reply.
I am studying to be a Mechanical Engineer, I will graduate soon.
You are very skillful and you will become an Engineer
I believe you will achieve it. Good luck.
thank you brother
Hi Debby. Lathe on hold, bed ready to assemble. Headstock parts here. Moving.
Man, awesome work.... Never seen a work like your.... Im excited and waiting for next episodie... Congrats!!
thank you brother
😼🔥👍👍👍
Los videos son una pasada
thank you brother
Hello engineer! I haven't seen you for a long time, I was sailing in the Atlantic. I enjoy looking at your work, good luck!
P.S. How much have you done! Great job!
thank you brother
What does the removable block do?
there are so many brothers, just wait for the next video
Awesome build your really doing something that many of us would love to do.
thank you brother
Itu spindle nya pakai proses hardening atau engga pak?
Tidak bang
Perfect!!!!
Thank you brother
你不是一般的人，每一条评论都回复，从这里就可以看出你之所以能完成这么出色的工作，必然也是有出色的性格优势的。
thank you brother🙏🙏
Any new videos coming?
Not to be a buzzkill, but make sure that you always grind with a long enough piece of sandpaper and never bring the ends less than 80 degrees apart when sanding on the lathe. A coworker of mine lost his finger by bringing the ends together. The paper stuck to the axle and ripped his finger right off.
thanks for the advice bro
Can you show it working? I am confused
I'm working on it
great work man! Eager to see it all come together.
thank you brother
Very nice work !
thank yoy brother
akhirnya upload lagi om
Siap om nanti kita upload lagi👍👍
Good
Thank you brother
Эй Дебби, где новые видео? Они нам очень нужны🌝
I'm just waiting for my brother, I'm working on it and it takes more or less time because all systems must work perfectly, you can see photos of my activities on Instagram
Muito bom profissional
thank you brother
Mantap bang 👍
Terimakasih bang🙏🙏
Mantap 👍
Terimakasih🙏🙏
@@DebbyNovrinal semangat om 👍👍
Siap mas👍🔥
Awesome
thank you brother
Next part place
Ok👍🙏
Awesome..keep it up..
ok, thank you brother
Parabéns mn sucesso
thank you brother
good video debby
Thank you brother
Sudah lama ga upload kemana saja om
terimakasihmas,lagi ada kesibukan di toko.maaf videonya upnya kelamaan sambil cari ide dan bahan juga😅
Good job my brother
Thank you brother
Very great job brother
thank you broter
Thank you brother
Bravo
Thank you brother
👍
👍👍👍
Thank you
💪💪💪👍👍👍
Genial
Thank you brother
No painting? Also you should add a spindle lock so it doesn't chatter
I have done the spindle lock, just wait for the next video
@@DebbyNovrinal😁 can't wait for the next video
Semangat mase....👍
Terimakasih mas
nice Project man 😎😎😎😎
Thank you brother🙏🙏
SO, How's it cut,, I know you've got to be done. Give us a sneak peek.... Hope your well..
ok brother
💯💯💯💯💯💯💯💯💯👍
💪💪💪💪💪💪💪💪
om pesanan orang apa pake sendiri.
Yang sekarang untuk pake sendiri mas
Show viu
thank you brother
Нормально
thank you brother
👍👍👍👍👍👐👐👐👍👍👍👍👍👍👍👍👍
Pokok nya yg komen orang luar semua om wwkwkwkw mantap
😁😁😁nggak juga mas ku.terimakasih mas atas dukungannya🙏🙏
@@DebbyNovrinal sama" mas! Semoga chanel anda semakain berkembang 🙏
🤟🤟🤟🤟🤟🤟🤟
Thenk you master
cerdas
thank you brother
Its a "SPINDLE" not a "SPINDEL" apart from that good work.
thank you brother🤣🙏🙏🙏
Thanks, thanks, thanks.
thank you
Is important to watch all ads til end. This help suport Debby Novrinal channel.
thank you brother
Lama g nongol master
Maaf mas lagi banyak kerjaan akhir tahun🙏🙏
Brilliant!
Thank you brother
Creat
Thank you brother
You have been away for a long time, thank God you are fine
I'm always there for all my brothers
Pleasure to see Your Job🦾
thank you brother
ada no wa nya BG,,sy mau perbaiki bar sinso.ganti baja
089621482218
Let your kids watch all the footage you shot while building this, to stop them for scrapping the machines when your time has come.
But you'r probably going to teach them how to machine, like any half decent father does.
thanks for the advice bro
Hello
Mention the size of the pieces, it will be very good, please, if possible, send me a map of the standing drill in WhatsApp so that I can make it too,
It is very expensive to buy and I have to make it, if you do me a favor I will be grateful to you
You need to learn how to name your videos by order, else people cannot follow your progress
Thank you for the advice
👍👍