Homemade - High performance RC Paraglider - Open 2.0
HTML-код
- Опубликовано: 23 июл 2020
- Eigenbau RC Gleitschirm.
Modell : Open 2.0
4m Spannweite
31 Zellen
Streckung 7,8
Tuch : Skytex 27
Leinen : 0.4mm Aramid
Entwicklung : Andreas B.
Bau : Tim Weber
Vielen Dank an Andreas für die Pläne und die Tipps :D Ohne dich wäre das gar nicht möglich gewesen!
I Paraglide by myself... Your Job is great!
Well done Tim! Mega Job gemacht!🤙🏼😊
Danke Olli :D
Amazing work sir!
super Idee, perfekt umgesetzt. Daumen nach oben von mir.
ok, thanks for your response, I'll try Andreas then
Der Schirm isch Schön geworden.
Gruss Andreas
Danke Andreas, hast du sehr gut entwickelt :)
Tim, so much work - looks perfect. Great job.
Unbelievable 👍👍👍
geile Arbeit, und woher bekomme ich das Schnittmuster und Material, wenn ich mir auch einen nähen möchte?
Can i have the measurements of the glider?
Hello i want to build one too, do you have tutorials or plans?
muito bom
Can u share the files I am trying to make for some project
great work!!!
cloud you please provide the plans file. most appreciated
onde você compra o tecido?
Bon travail partagerai tu le fichier surfplan? merci
Hi Tim, How did you calculate your bridle setting? In surfplan the minimum line length is 5m.
Good morning, i got all plans from the inventor of the wing .He did all the plannings and on his website you can find a few more informations . paraelch.weebly.com/
Hallo, ich finde es toll, dass Ihr Bildschirm so schön aussieht und gut fliegt. Können Sie mir sagen, was der AoA-Winkel des Flügels und der TOWpoint in % ist, den Sie in der Surplan-Software verwenden? Ich versuche auch, selbst etwas zusammenzunähen, aber mein vorheriger Bildschirm war eine Katastrophe, wahrscheinlich weil die Winkel nicht stimmten?
Grussen aus Belgien
Hey ,thanks a lot ;)
i didnt make the plans for the glider , i only builded it after the plans from ->(paraelch.weebly.com/rainbow-40.html)
Andreas has a lot of experience in building RC gilders and if you contact him , i think he can help you :)
Best regards ,
Tim
Magnifique travail. Partagez vous les plans ? Je serez tres intéressé
Hai mister can you share link where you buy this material , becouse i want make it
Hey,
the Panels are made out of Porcher Skytex 27, the ribs are Porcher Skytex 32 hard.
0,45mm Aramide line.
If you want to rebuild it, send me your Email.
Best regards,
Tim
I bought all Materials
@@thermik_timmy ok, tanks so much mister
May i ask? Is it needed to sew the edges of panels?\And how much KG it can to carry?
Hey, yes. Otherwise the fabric can get damaged very fast
@@thermik_timmy Ok, thanks for answer :)
@@thermik_timmy And ome more question - i cant understand how we can install ropes on fabric. In video it looks like additional "belt". And rope sewed between fabric and belt. Im i right? And in theory - is it possible to use special metal "rings" that we can "hit" into fabric with hammer and put rope's edge into ring and then make a knot? English isnt my first, sorry for mistakes.
@@derungebundener2019 the lines are atteched to the fabric by a small piece of flat polyestercord. If youre interested ,send me your mailadress and i will send you some detailled pictures of the wing.
I think your idea is good, there are only a few grams (In acro maneuver a bit more) tension on each line.
The weightrange is between 2,5 kg and 4 kg. depends on the wind ;)
which fabric used
Panels : Porcher Skytex 27
Ribs : Skytex 32 hard
Lines: 0,4mm aramide
Perfect work Tim, it fly amazing😀👌. I want to ask: What is the flat area and weight of the paraglider (everything, not just wing)? How many degrees is the angle of attack of the wing, please? Is it four liner, or three liner? Thanks. I would very appreciate answers, because I want to make one like your😁
Thanks :) The Flat Area is 2.06m2 and it is a four liner. paraelch.weebly.com/open-201.html
Here is the website from the developer of the wing, maybe he can help you a little bit more with the angle of attack ;)
Thanks😃
Kann ich evtl. die Teile als PDF oder dxf bekommen? Der Winter ist ja bekannlich lang und einen komplett selber zu konstruieren traue ich mich noch nicht! ;-)
Hey Florian, du kannst mich gerne bei Facebook anschreiben oder schick mir doch mal deine Emailadresse.
Gruß, Tim
@@thermik_timmy Hier meine Mail Adresse: skyflo@hotmail.de
@@thermik_timmy wie bekomme ich dein Schnittmuster
plese how I can adquires a plan for wing 2,0mt
Hey , there is a software called "Surfplan". There you can create your own wings. But i dont know how this exactly works. I got the plans for this 4m wing.
;)
What is the fabric name?
Hey , its Porcher Skytex 27 for the Sail ,and Porcher Skytex 32hard for the ribs ;)
hello friend can you send me the blocks for me to print on A4 paper?
Sir please send pdf learn
Wie viel wiegt das Trike?
Das Abfluggewicht ist bei 4kg, ich habe ne Menge Blei verbaut :D
Wow it is amazing RC paraglider! I really want to make one. So I got website that you commented another. however I cannot find the sle file to make the wing. So I want to ask you how did you make the wing in paper or Do you have the sle file? If you have it can you send me the file? :)
Good Morning, thanks :) Andreas (The founder of Paraelch) has a lot of RC Wings, do you want to build especially this wing ? Its one ofe the biggest he made and its a lot of work :P If you want it, then send me your email, i will contact you ;)
If you want to build another wing from his website then you can find his email on the paraelch page ;)
@@thermik_timmy Hi! this is third time to comment!! youtube automatically delete my comment because of email address is included! My email is gmail! Here is front part of my email [hwyhhh0308] I believe you understand:> By the way I saw your comment very well! I want this wing model really! I hope you send me this model:)
@@user-ub4qk7zd3u please check your mailbox :)
@@thermik_timmy I check your email :p
Hallo Tim,
Super dein Schirm.
Wir würden das auch gerne mal bauen.
Würdest du mir uns beim Nachbau behilflich sein?
Gruß
Wolfgang
Hallo Wolfgang, die Pläne habe ich von Andreas ( paraelch.weebly.com/ ). Melde dich einfach mal bei ihm, er wird sich sicherlich freuen wenn du ihn nachbaust.
Falls du noch weitere Fragen bei oder zu dem Projekt hast kannst du dich gerne nochmal melden.
Viele Grüße,
Tim
Projeto ?
is not a paraglider is a paramotor
For the first tests it was a paramotor, now its a glider ;)
Why cant we have a baloon type but same shape pressurised inflated one parafoil wing with inert gas, this will make it more safe even if the wind blows wrong direction, can be infaled in seconds jjst like a car air bag with pressurised inert gas from canister, instead of explosion, no need to inflate the airofoil with ram air, this is how I feel not necessary I am right, but thats why I share it with you correct me if you feel I am wrong, you are a professional.
Hey , thats such a nice idea :) I thought about it many years ago.. :D a double skin paraglider wing has a volume of a few hunderet litres and if the cells are closed and filled with helium you will go up like a ballon :D once at cloudbase you can release the helium and glide like a paraglider. Problem is that helium is very expensive and even the smallest holes in the wing (like the sticht of the sewing) will release the gas very quick. the fabric has to be a lot thicker (it adds more weight) and then paragliding would be a lot more complicated than it is right now. The company Swing paragliders has a RAST (Ram Air Section Technologie) wich keeps the rear section of the paraglider inflated even if the wing collapses at the front . The´re a lot more professional than me and i think there is a reason why they dindt made it at the front of the paraglider ,but i dont know exactly. I know one guy ( from Instagram : evankruger8 ) he flies kites from ozone with a special riser system like the moustache from flare ( Skywalk). These kites have only a few air intakes and they keep the pressure a lot more than a paraglider. So were not the only ones who thought about a new glider technologie ;) We will see in the future what comes in this direction ;) Until there .. Happy landings :D
@thermik_timmy yeah but slight variation, dont use helium otherwise we cannot call it glider it will be called a baloon, right option is to use nitrogen gas which is same density as normal air as nitrogen 75% in air and is little lither than air and is also inert , non explosive, and can be storred under pressurised containers or canisters, so it will still function as a glider and still be safe no need to wait for airflow to fill the cells, this is my view, but I am not expert in paragliding but I am an amateur aeronautic guy, need to confirm wether my idea is feasible from a parafoil gliding expert only, what you say, like this you can use the parafoil as a glider and not like a baloon just floating but actually flying and maneuvring just like an actual aerofoil aircraft, but without the danger collapsing uder cross wind as many people have lost their lives
@thermik_timmy another idea is like how you said make only few cells pressurised so thats the other cells can recover easily when in case of any collapse from cross wind but needs to be done wisely and need alot of innovation here
@thermik_timmy nowadays even car tyres use nitrogen as it is marginally but still significantly lighter than normal air
@thermik_timmy regarding materials thats no issues our modern day material science is well advanced and people are planning to build bases on moon and mars by inflatable habitats such materials can be used in construction of parafoil, and also how its wowen also determines the strength, example how aramid and carbon fibre is woven give it strength, but cannot use it for parafoil as it is little heavy just giving example of how its woven for strenght thats all