Had one of the earlier Puller Pro Rs' and I remember giving feedback about the outermost bearing being exposed I think, causing mine to fail. To my amazement not only did you send me a full replacement, you had changed the outer bearing cover *protecting* the bearing and sealing the can more securely :o Still using that exact one today 4+ years later :) Will have to buy another as backup!
I ended up putting the puller pro 3500 in an Arrma Senton with a Typhon body after having it in my trx-4 for a while. I can't remember my gearing, but that that thing is a monster!
The 3500kv puller pro is prolly my favorite from you for all around great crawler motor. Then it's the 10 shooter an 1800kv revolver m in battel for smoothest start up and decent wheel speed.
Don’t have a rig to put one in at the moment but might have to nab one anyway just gotta decide which 😝 I’ve got a std 3500KV in my Bomber and a pair of stubble’s in my SCX10 OG Honcho and Poor man’s VS410 along with one of your 1/8 scale motors in an old Losi SCTE setup as a basher I’ve got no idea what KV’s those are off the top of my head all awesome though
I have a 2700kv and 3300kv V2 in two of my endurance trail rigs, and a 4100kv L series in my LMT. Love the Puller Pro series, but they definitely don't go into pure crawling rigs much anymore....looking forward to see what's coming!
Hey little help from the community please what would you guys put in a stock brushed Arrma granite for a brushless upgrade? I want to stay around 2s as I already have a few 100c 2s lipos. Thank you!
Strange, I hopped on the website and none of the puller pro series motors say they are discounted and 90% of them are out of stock. That's the fastest sale I've ever missed.
I have puller pro 2700kv motors, both stubby and regular in all but two trucks, they have revolvers in them. I’m ordering two more now, for future projects.
I went straight to the 4274S but they're gone. 😞 I honestly have a box full of Puller Pro's I've bought over the years. Love them all, I'm just extremely partial to the 4274S and the Revolver's.
Wow, you snooze you lose. All gone except the one that's to big for my rigs i could use it in and to small for my others that aren't already handled. Congrats, you definitely got that shelf space now, lol.
I noticed this on the website last night at 2am when i was at work 😬 got a 3500kv. I also bought a 2700kv crawlmaster bl last week. I put it in my scx10ii. Great success 👍
bro i just found out not long ago you are located in my hometown do you have a storefront? i drove by the address i found and didnt see your business i did have my kid and fiance with me so i didnt try very hard but i figured it would be easy to find and i was wrong. plus i wouldnt mind grabbing some shirts for the local mini comps
2100-2700kv is what I have. I had a 4274 in my ryft for a very long time. I thought something was wrong with it so I pulled it for a 1515 castle. But the esc was junk. I need to put it back in!
@ericsmith3317 restock in the morning. I've done drops early and people complain, mid day and people complain, after work and people complain... We've got plenty to go around. Not done yet.
@shaynejenkins446 We meter them out slow so that shipping department can keep up. We will restock tomorrow morning. We've sold so many today that the next project is half funded in 6 hours.... I don't think telling me to just "move on" is good advice....
Perfect timing! Was looking at a 550 trail master and this swayed me to a stubby 2200, my son's birthday upgrade is more exciting now.
HH 2n1 4s capable🔥🤘
2700kv 540L is my go-to for all of my crawler projects.
Had one of the earlier Puller Pro Rs' and I remember giving feedback about the outermost bearing being exposed I think, causing mine to fail. To my amazement not only did you send me a full replacement, you had changed the outer bearing cover *protecting* the bearing and sealing the can more securely :o Still using that exact one today 4+ years later :) Will have to buy another as backup!
when's the Holmes hobbies album being released??? I'm in!!🤪
Me to put it out there.
I love my puller pro in the vanquish Phoenix!
I run your Stubby Puller Pro 2200kV in my Axial Capra 4WS... great motor!
i got a 2200kv 540 paired with Mamba X in my traxxas TRX6. Love the control I get. I might wanna upgrade to the 540L if I can make it into a tow rig.
Had a puller pro 3300kv motor and it blew my mind how super smooth it was down low and still had plenty of speed. Great motors.
Can the 1/8 motor run in a scx6
I ended up putting the puller pro 3500 in an Arrma Senton with a Typhon body after having it in my trx-4 for a while. I can't remember my gearing, but that that thing is a monster!
So how are those new servos coming along?
The 3500kv puller pro is prolly my favorite from you for all around great crawler motor. Then it's the 10 shooter an 1800kv revolver m in battel for smoothest start up and decent wheel speed.
Every one of them is out stock but 2 already that's nuts
💯❤️👍
Don’t have a rig to put one in at the moment but might have to nab one anyway just gotta decide which 😝
I’ve got a std 3500KV in my Bomber and a pair of stubble’s in my SCX10 OG Honcho and Poor man’s VS410 along with one of your 1/8 scale motors in an old Losi SCTE setup as a basher I’ve got no idea what KV’s those are off the top of my head all awesome though
Loved my 2.2 s and PullerPro Power.
I like doing my part.
Would the 4274s be a good motor for the 1/7 scale rlaarlo MK07?
Torque density and smooth start up
I’m excited for what’s coming
Damn, wish I hadn't already bought a new motor for my Phoenix, would be sweet to have a proper HH in that, maybe my Ascender need an upgrade too :)
available in the Philippines?
Hey John, which Puller Pro would you recommend for a stock gearing Capra, stock gear Ecto, and stock gear Phoenix????👍👍👍
I have a 2700kv and 3300kv V2 in two of my endurance trail rigs, and a 4100kv L series in my LMT. Love the Puller Pro series, but they definitely don't go into pure crawling rigs much anymore....looking forward to see what's coming!
PLEASE restock servos!!! i’m dying here i only trust your servos!
Hey little help from the community please what would you guys put in a stock brushed Arrma granite for a brushless upgrade? I want to stay around 2s as I already have a few 100c 2s lipos. Thank you!
Man i always wanted a puler pro i was thinkinh of getn one in the low 2k.kv for my buggy car truck thing
Strange, I hopped on the website and none of the puller pro series motors say they are discounted and 90% of them are out of stock. That's the fastest sale I've ever missed.
Hey John, I need a motor that will work in a 4.67lb 1/18 capra ,what would you recommend?
Wait, is it a 4 pole sensored motor?
Glad I didn't buy one last week like I was going to. Still trying to figure out witch one is the strongest. Building a pulling tractor. Anyone know??
@@kenreynolds1092 r spec if you can use larger than 540. 6000kv for 2 and 3s (don't spin it unloaded) or 4100kv for 3 and 4s (same advice)
I have puller pro 2700kv motors, both stubby and regular in all but two trucks, they have revolvers in them. I’m ordering two more now, for future projects.
The PP 3500 is out of stock. Do you have more to stock the website or are those gone for the time being?
when a window closes, another door opens. good luck with the new product.
I can’t wait soon I get some cash I be picking up a puller pro ! ❤
Snaggin mine now!
I went straight to the 4274S but they're gone. 😞 I honestly have a box full of Puller Pro's I've bought over the years. Love them all, I'm just extremely partial to the 4274S and the Revolver's.
@@tomlucasrccrawlers9108 we will restock, should have more in warehouse
Wow, you snooze you lose. All gone except the one that's to big for my rigs i could use it in and to small for my others that aren't already handled. Congrats, you definitely got that shelf space now, lol.
I noticed this on the website last night at 2am when i was at work 😬 got a 3500kv. I also bought a 2700kv crawlmaster bl last week. I put it in my scx10ii. Great success 👍
So what is the price of a pro motor then for us UK people?
How long is your 2n1 Motor/ESC gonna be?
Im in, plan to pick up a puller pro. 👍
I ordered the puller pro standard 3500kv motor. What would you reccomend for an esc? Cheaper is better but, best choice is, well best!!
@@frebify mamba x , copperhead 10, cobra 10
Just got me a couple. Can’t wait to get that new motor with the giant rotor lol.
@johnroddy931 hey!! WHO SAID THAT?!? WHERE DID YOU LEARN THIS INFORMATION ? 😆😆
@@HolmesHobbies I got zoom haha. Can’t wait.
Love the song! 🎵 ❤️ 💕 Good stuff sir 👍
4s 2in1 please that's what we need
Looks like trx4m motor and esc I hope so
I can't get the crawl master v3 and revolver combo but I can buy them individually for 20bucks more😢
Those are very nice motors.
2700 Puller Pro in a Ryft. It's a blast.
Same here! 🎉
Got mine ordered lol. I have been wanting one for a bit, so I couldn't pass up the deal!
Awe yeah!
@HolmesHobbies can't wait to run it! Also, I can't wait to see what's coming out!
Those went quick 😢. Missed out on the two that I wanted while filling out shipping info
@@CKDezines we will restock the website in the morning
Sweet!!! @@HolmesHobbies
Love the theme song😂😂. Who made the song?
Excited to hear what the new stuff will be!
A revolver and speed control for the scx6.
bro i just found out not long ago you are located in my hometown do you have a storefront? i drove by the address i found and didnt see your business i did have my kid and fiance with me so i didnt try very hard but i figured it would be easy to find and i was wrong. plus i wouldnt mind grabbing some shirts for the local mini comps
My guess is that your coming out with a 2 in 1 Motor/ESC ...One Pc
Love my puller pros!
2100-2700kv is what I have. I had a 4274 in my ryft for a very long time. I thought something was wrong with it so I pulled it for a 1515 castle. But the esc was junk. I need to put it back in!
👋
@@meirdeaph hey buddy!!!
Let’s try out the 3500 , I have. Bunch of 1800 ,2200, 2700
Damn I just bought one!
I LOVE THAT SONG❤️❤️🤣🤣
Im On the 119 times now❤️🤣
Dang it! I’m late to the party and they are all sold out already
We are going to restock in the morning.
You had to do this midweek before i get paid, hope u can snag a few
yeehah. crawl 'em cowboy !
Holmes Micros LET'S GOOOO!!!
Anyone got sensored ESC suggestions for these? The song has compelled me.
Nice video but everything shows sold out!!!!!!
shame not in the UK 😬
Servos...?????????
You say everyone just looked at your UK website and there still at the original price
@webb-1 that is a UK distributor and not Holmes Hobbies.
Woulda been awesome if u wouldn't have done it in the middle of the damn day while people we're at work 👍🏼👍🏼 way to go
@ericsmith3317 restock in the morning. I've done drops early and people complain, mid day and people complain, after work and people complain...
We've got plenty to go around. Not done yet.
We making Brawlers a thing next?
Wish this sale didn’t come out as soon as my motorcycle engine blew up and car cracked a radiator 😅
Bad news: John shaved his beard!
sad times...
There is like only 4 options left on the site for puller pros, and not the ones people want. Just pull them already and move on.
@shaynejenkins446 We meter them out slow so that shipping department can keep up. We will restock tomorrow morning.
We've sold so many today that the next project is half funded in 6 hours.... I don't think telling me to just "move on" is good advice....