Thank you for a really good explanation and demonstration of this job, I have just got one of these and intend to do exactly this once I get the parts. Cheers
I just finished up refurbishing my 111B It works great. It looks great too. I used the Mother’s polish you recommend, it worked great and no odor. Much better the Brasso. Thanks for the tips.
I just picked up an optimus stove that looks like this but it is a two burner. It is pretty dirty and rusted case because a mouse was in the box and made a nest in there. I started cleaning the case up today. Copper anti seize is higher temperature rating than the silver one. Guess I will have to take some time and take apart the valves. The old fuel in there was really nasty smelling - super old ! Thanks for your videos .
@Larry Kapp Sounds like an Optimus 22 or 22B. You can see a short video of one I did a year or so ago here: ruclips.net/video/rd0gkV1iIjM/видео.html You might get some ideas or find it inspirational. The 22B should run like this one when you have it restored: ruclips.net/video/KsXj8q_yQCg/видео.html You can get the original instructions for the 22 version here: www.berniedawg.com/optimus-22-111-instructions/ Drop me a note if you need the Optimus 22B instructions. I can send 'em to you in email. bd@berniedawg.com Good luck and have fun. Great stoves! BD
@@BernieDawgCinema Thanks for the info - I will check that out. if I give up on the project I will give it to you if you want it. At least I saved it from the metal recycling dumpster !
@Larry Kapp Wow! Thanks, Larry! That's very generous of you! I'm also available to help you with your project through email at the above address if you get stuck on your restoration. 👍BD
Excellent series of videos and lecture, now to get my 111B back up and running, so glad I did not throw it out a few years ago. John, for some reason my RUclips says Zena my wife's name.
@BigArch6564 Thanks. The British Military #12 is awesome. But, it’s pretty much a big Optimus 111 on steroids. Rebuilding and repair on the #12 is fairly straightforward and very similar to the 111. The two stoves even use some of the same parts. I have three videos about fitting the #12 with silent caps. ruclips.net/video/z9z4R6vwQ28/видео.html and ruclips.net/video/9GXU_VQBjDk/видео.html and ruclips.net/video/GXsD9rL3pFo/видео.html . If you need specific #12 questions answered that can't be addressed from the 111 videos, just drop me an email. I’m #12 fluent. bd@berniedawg.com BD
Big topic for a comment reply!! But, I''ll try. There are three functions. 1. filters fuel, 2. aids in vaporization, 3. But, MOST important...(and the real reason it's there)... the mesh roll controls/arrests "flash vaporization pulsing". Anticipating the next question... Do you *have* to have a roll of mesh? Yes. Don't leave home without it. 🙂 BD
Hi Bernie, great video thank you. I have one question - how do you recommend cleaning the inside of the tank ? Im currently refurbing a Primus 22 ( kerosene ). Thanks in advance. Mike
Hi Mike, and thanks. If you’ve got old dried kero (black or brown deposits) in the tank, remove everything so you just have a bare tank. Put acetone in the tank. Plug openings with tight wads of paper toweling. Shake it around and let sit for a day or two. Shake as you remember to during that time. Acetone is a solvent for kerosene and will melt the old dried kerosene. Some folks like to use BBs or even coarse sand in the tank with the acetone as “scrubbers”, but you may need a magnet tool to get all the BBs out or compressed air to get out the sand. May not need to or be worth the hassle. You’ll likely want one or two rinses with clean acetone once you dump out the nasty stuff. Warm water and a little Dawn dish soap to finish. Dry completely. Bear in mind that acetone is also a solvent for any lacquer that might still be present on the outside of the tank. So, figure you need to be really careful or that you’ll be doing a full polish on the tank (don’t know what yours looks like but most can profit if there is a lot of food corrosion spots). Want more help or info? bd@berniedawg.com
Thanks Bernie, I've ordered up some acetone and will follow your advice. Just picked the stove up a few days ago, it looks like it's had a fairly easy life and I'm looking forward to using it lots on camping trips next year. All the best.
If the stove is in good shape and the tank looks clean already, you might consider skipping all this work and just running two tanks of fresh kerosene fuel through it so it can self-clean. Enjoy! BD
Hi Bernie, First thing I did was emptied the tank into a jar. The Kerosene was old and brown with a fair amount of sediment too. Inside the tank it also looks like it could do with a strong rinse at least so I'll follow your advice with the Acetone. All the best. Mike
@DarkLinkAD I'm not entirely sure I understand your question. The tank is pressured up using the pump. When done cooking and the flame is extinguished, there will still be pressure in the tank. Tomorrow morning, there will still be pressure in the tank. The way to release the pressure is to open the fuel cap and release the pressure. But, don't do that while there is flame around or BOOM. You should release the pressure before transporting the stove. More questions? Use the email in the description box below the video. 👍 BD
Gary my 111b won’t burn blue. It pulses between big sooty yellow flames and blue on high only going to all blue at very low simmer position on supply valve. Any ideas?
@Donn Sponholz It's tough to diagnose these in RUclips comments, but a few things spring to mind. - You are (of course) using Coleman fuel in the stove or other camp stove naphtha fuel. If not, and you're using kerosene, that could be the problem. - Have you checked to make sure there is a tightly rolled roll of fine wire mesh in the fuel feed pipe between the tank and the burner? If not, or if there is too little of the mesh, it's badly rolled, or is too big of a mesh weave, that can cause your fuel not to vaporize correctly. - Worn out jet. That's the best I can do in comments. If I didn't guess the answer, I have a nifty email address where you can send photos and video of your stove misperforming so that I can help you get it up and running correctly. I have a good success rate in email. Plus, if all else fails, I fix stoves for folks for cheap. 👍 bd@berniedawg.com BD
Thanks :) i just picked a model T one of these today that needs some TLC before i can use it. your vids have given me all the information i need :) seems im missing the supplied tool for removing the jet, but that shouldn't be a problem.
Thanks! Glad I could help. You can get a repro stove tool from one of the suppliers in Asia on my parts supplier page: www.berniedawg.com/stove-part-supplier-links/ Good luck! BD
Thanks :) apparently this T model didn't come with the tool in the 1st place? there's no clip for it, logo is embossed in lower right of lid, burner has the 4 supports instead of 2, and shield appears to be brass. after looking about I found out is is indeed a T but not sure what iteration of the T.Its case is a bit rusty, but looks in working order, tank pressurises too, will be a nice restoration project :)
So, yeah. All T's have four "supports", aka burner tubes, on the burner. There is no such thing as a two-tube 111T burner. It's a regulated silent burner. No tool clip means you probably have one of the Optimus Internationals. They came with a multi-tool spindle control that does everything - three tools in one. If you don't know what I'm talking about on this, maybe it's missing (?), then best to contact me at my email so you can share some photos and I can stop guessing what it is you have. :-) And, given it's a new-to-you stove which seems to be throwing you some surprises, might be best to get a little help and info rather than mess things up. But, it's your call. Pretty sure we're over the limit on the RUclips comments. 👍 berniedawgstove@comcast.net BD
yea its an Optimus International one, it does have the regulator knob/spanner combo. from what i can tell its all there except for one of the pan support bars, i can probably make one til i find a replacement tho. I think i'll be fine :) i'll contact you if i need any help :)
Riiight. Okie-doke, then. FWIW, I have a pile of used wire supports for 111 stoves. I wish you luck. "thebongmaster" as a RUclips name? Well, maybe some extra bunches of good luck, then. 🤨 👍 BD
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
I grew up with my parents using this stove !!! and they still have it !
Thank you for a really good explanation and demonstration of this job, I have just got one of these and intend to do exactly this once I get the parts. Cheers
You are welcome!
Brilliant mate just exactly what I needed , good clear instructions and superb camera work . 👍
Great demonstration on putting back this stove BD. The stove looks amazing. Thanks for sharing.
Thank you! I like the 111Bs and their two-burner sibling, the 22B.Just need to keep after the NRV for safety. 😉 BD
I just finished up refurbishing my 111B
It works great.
It looks great too. I used the Mother’s polish you recommend, it worked great and no odor. Much better the Brasso.
Thanks for the tips.
You're welcome. Glad the videos and advice worked out. BD
I just picked up an optimus stove that looks like this but it is a two burner. It is pretty dirty and rusted case because a mouse was in the box and made a nest in there. I started cleaning the case up today. Copper anti seize is higher temperature rating than the silver one. Guess I will have to take some time and take apart the valves. The old fuel in there was really nasty smelling - super old ! Thanks for your videos .
@Larry Kapp Sounds like an Optimus 22 or 22B. You can see a short video of one I did a year or so ago here: ruclips.net/video/rd0gkV1iIjM/видео.html You might get some ideas or find it inspirational. The 22B should run like this one when you have it restored: ruclips.net/video/KsXj8q_yQCg/видео.html You can get the original instructions for the 22 version here: www.berniedawg.com/optimus-22-111-instructions/ Drop me a note if you need the Optimus 22B instructions. I can send 'em to you in email. bd@berniedawg.com Good luck and have fun. Great stoves! BD
@@BernieDawgCinema Thanks for the info - I will check that out. if I give up on the project I will give it to you if you want it. At least I saved it from the metal recycling dumpster !
@Larry Kapp Wow! Thanks, Larry! That's very generous of you! I'm also available to help you with your project through email at the above address if you get stuck on your restoration. 👍BD
Very good job from your part sir .
Many thanks
Such a fantastic video series, Bernie. Thank you SO MUCH! I just picked one of these up, it's going to be in top shape for this Summer.
Thanks! Glad to hear the series has helped you. These are great old stoves. BD
Bout to start mine and plan on referencing this series. 👍🏻👍🏻👍🏻👍🏻 thanks
Excellent! Thanks. Give a shout through email if you have questions or need help. BD
Thank you! No leaks now 😊
@Erling Storvik Great news! Happy camping! BD
Excellent series of videos and lecture, now to get my 111B back up and running, so glad I did not throw it out a few years ago. John, for some reason my RUclips says Zena my wife's name.
Thanks! BD
That means you watched a video on her account. 🤣🤣🤣🤣
Nice work...
Great videos Gary
Thank you! More on the way. BD
Good job.
Thanks Bernie!
Thank you! BD
Cracking vlog and thanks you for sharing. Do you have anything on british army no12 stove?
@BigArch6564 Thanks. The British Military #12 is awesome. But, it’s pretty much a big Optimus 111 on steroids. Rebuilding and repair on the #12 is fairly straightforward and very similar to the 111. The two stoves even use some of the same parts. I have three videos about fitting the #12 with silent caps. ruclips.net/video/z9z4R6vwQ28/видео.html and ruclips.net/video/9GXU_VQBjDk/видео.html and ruclips.net/video/GXsD9rL3pFo/видео.html . If you need specific #12 questions answered that can't be addressed from the 111 videos, just drop me an email. I’m #12 fluent. bd@berniedawg.com BD
제가 제일 좋아하는 옵티머스 111 입니다 영상 잘보았습니다
노즐침 정비 어려웠는데 이제 좀 알것같습니다
감사합니다. 청소용 바늘을 알아낼 수있어 기쁩니다. 멋진 스토브입니다. BD
Excellent.
What is the function of the wire mesh?
Big topic for a comment reply!! But, I''ll try. There are three functions. 1. filters fuel, 2. aids in vaporization, 3. But, MOST important...(and the real reason it's there)... the mesh roll controls/arrests "flash vaporization pulsing". Anticipating the next question... Do you *have* to have a roll of mesh? Yes. Don't leave home without it. 🙂 BD
BernieDawg Cinema thanks.
Hi Bernie, great video thank you. I have one question - how do you recommend cleaning the inside of the tank ? Im currently refurbing a Primus 22 ( kerosene ). Thanks in advance. Mike
Hi Mike, and thanks. If you’ve got old dried kero (black or brown deposits) in the tank, remove everything so you just have a bare tank. Put acetone in the tank. Plug openings with tight wads of paper toweling. Shake it around and let sit for a day or two. Shake as you remember to during that time. Acetone is a solvent for kerosene and will melt the old dried kerosene. Some folks like to use BBs or even coarse sand in the tank with the acetone as “scrubbers”, but you may need a magnet tool to get all the BBs out or compressed air to get out the sand. May not need to or be worth the hassle. You’ll likely want one or two rinses with clean acetone once you dump out the nasty stuff. Warm water and a little Dawn dish soap to finish. Dry completely. Bear in mind that acetone is also a solvent for any lacquer that might still be present on the outside of the tank. So, figure you need to be really careful or that you’ll be doing a full polish on the tank (don’t know what yours looks like but most can profit if there is a lot of food corrosion spots). Want more help or info? bd@berniedawg.com
Thanks Bernie, I've ordered up some acetone and will follow your advice. Just picked the stove up a few days ago, it looks like it's had a fairly easy life and I'm looking forward to using it lots on camping trips next year. All the best.
If the stove is in good shape and the tank looks clean already, you might consider skipping all this work and just running two tanks of fresh kerosene fuel through it so it can self-clean. Enjoy! BD
Hi Bernie, First thing I did was emptied the tank into a jar. The Kerosene was old and brown with a fair amount of sediment too. Inside the tank it also looks like it could do with a strong rinse at least so I'll follow your advice with the Acetone. All the best. Mike
Thanks for the feedback on the yucky kero. I feel better giving you the acetone advice now. 👍 BD
Do you have a silent cap you sell for this?
@Young_of_the_mill www.berniedawg.com/silent-cap-for-111b/ BD
Is this always undwr pressure. Or is it pressure then vacuum?
@DarkLinkAD I'm not entirely sure I understand your question. The tank is pressured up using the pump. When done cooking and the flame is extinguished, there will still be pressure in the tank. Tomorrow morning, there will still be pressure in the tank. The way to release the pressure is to open the fuel cap and release the pressure. But, don't do that while there is flame around or BOOM. You should release the pressure before transporting the stove. More questions? Use the email in the description box below the video. 👍 BD
Gary my 111b won’t burn blue. It pulses between big sooty yellow flames and blue on high only going to all blue at very low simmer position on supply valve. Any ideas?
@Donn Sponholz It's tough to diagnose these in RUclips comments, but a few things spring to mind.
- You are (of course) using Coleman fuel in the stove or other camp stove naphtha fuel. If not, and you're using kerosene, that could be the problem.
- Have you checked to make sure there is a tightly rolled roll of fine wire mesh in the fuel feed pipe between the tank and the burner? If not, or if there is too little of the mesh, it's badly rolled, or is too big of a mesh weave, that can cause your fuel not to vaporize correctly.
- Worn out jet.
That's the best I can do in comments. If I didn't guess the answer, I have a nifty email address where you can send photos and video of your stove misperforming so that I can help you get it up and running correctly. I have a good success rate in email. Plus, if all else fails, I fix stoves for folks for cheap. 👍 bd@berniedawg.com BD
How many BTU is this?
9-10K?
👐👐👐👐👋👋🏻👍👍👍👍
🙂😊😎😁😇
Thanks :) i just picked a model T one of these today that needs some TLC before i can use it. your vids have given me all the information i need :) seems im missing the supplied tool for removing the jet, but that shouldn't be a problem.
Thanks! Glad I could help. You can get a repro stove tool from one of the suppliers in Asia on my parts supplier page: www.berniedawg.com/stove-part-supplier-links/ Good luck! BD
Thanks :) apparently this T model didn't come with the tool in the 1st place? there's no clip for it, logo is embossed in lower right of lid, burner has the 4 supports instead of 2, and shield appears to be brass. after looking about I found out is is indeed a T but not sure what iteration of the T.Its case is a bit rusty, but looks in working order, tank pressurises too, will be a nice restoration project :)
So, yeah. All T's have four "supports", aka burner tubes, on the burner. There is no such thing as a two-tube 111T burner. It's a regulated silent burner. No tool clip means you probably have one of the Optimus Internationals. They came with a multi-tool spindle control that does everything - three tools in one. If you don't know what I'm talking about on this, maybe it's missing (?), then best to contact me at my email so you can share some photos and I can stop guessing what it is you have. :-) And, given it's a new-to-you stove which seems to be throwing you some surprises, might be best to get a little help and info rather than mess things up. But, it's your call. Pretty sure we're over the limit on the RUclips comments. 👍 berniedawgstove@comcast.net BD
yea its an Optimus International one, it does have the regulator knob/spanner combo. from what i can tell its all there except for one of the pan support bars, i can probably make one til i find a replacement tho. I think i'll be fine :) i'll contact you if i need any help :)
Riiight. Okie-doke, then. FWIW, I have a pile of used wire supports for 111 stoves. I wish you luck. "thebongmaster" as a RUclips name? Well, maybe some extra bunches of good luck, then. 🤨 👍 BD