Hi Stefa, nice to see your careful work. There is an incredible amount to clean. I used mine to clean each screw hole with a threaded pin. It is worth buying a fairly large ultrasonic cleaner to clean parts such as pistons and oil pumps, they will be like new. I changed the timing chain to mine for no reason, there was no stretching whatsoever. You can change the m73 distributor head tension rail to this engine so that the bearing won't start to sound in the future. Good luck with this project, I hope you find the necessary parts and the bearings are in such condition that they don't need to be replaced. While waiting for the next episode, greetings Jukka
@@synthwavegarage As gaskets, I used the original ones, as well as Victor Reinz and Elring. I also ordered the Ajusa sets, I used the gaskets of the distributor head housings, the original ones were not available. I bought a lot of parts from hubauer. I changed the 6mm 8.8 bolts to better 10.9 bolts. Fortunately, I didn't have to change the bearings, I measured them all, they were within specifications, there were no signs of wear or scratches, I renewed the bolts. The oil control rings of the M73 engine are different, the piston holes for the oil control rings are also different, I am not aware of any oil intake problems. Aeromotors has m70 Goetze piston rings, elring cylinder head bolts and Victor Reinz head gaskets, camshaft and crankshaft gaskets at reasonable prices. You can also find Ajusa at Aeromotorss. Yes, you can find parts for these if you can search and take the time.
I know what's going on the bedroom TV from now on while I'm going to sleep. Please never stop making these.
Kiváló relax videó! Köszi ezt is! 👍
Much awaited, much appreciated looking forward to excellent work as always from you.
Congrats on the 1k subs! Well deserved. On to the 2k (and beyond)!
Igaz, tenyleg relaxalos video ! Szuper melo. Udv. 👍
Hi Stefa, nice to see your careful work. There is an incredible amount to clean. I used mine to clean each screw hole with a threaded pin. It is worth buying a fairly large ultrasonic cleaner to clean parts such as pistons and oil pumps, they will be like new. I changed the timing chain to mine for no reason, there was no stretching whatsoever. You can change the m73 distributor head tension rail to this engine so that the bearing won't start to sound in the future. Good luck with this project, I hope you find the necessary parts and the bearings are in such condition that they don't need to be replaced. While waiting for the next episode, greetings Jukka
Hi Jukka. Thanks for the advice, if you have any ideas, feel free to share them with me. I will need it :)
@@synthwavegarage
As gaskets, I used the original ones, as well as Victor Reinz and Elring. I also ordered the Ajusa sets, I used the gaskets of the distributor head housings, the original ones were not available. I bought a lot of parts from hubauer. I changed the 6mm 8.8 bolts to better 10.9 bolts. Fortunately, I didn't have to change the bearings, I measured them all, they were within specifications, there were no signs of wear or scratches, I renewed the bolts. The oil control rings of the M73 engine are different, the piston holes for the oil control rings are also different, I am not aware of any oil intake problems. Aeromotors has m70 Goetze piston rings, elring cylinder head bolts and Victor Reinz head gaskets, camshaft and crankshaft gaskets at reasonable prices. You can also find Ajusa at Aeromotorss. Yes, you can find parts for these if you can search and take the time.
awsome work....
excellent video and excellent work