@@Miagarin- 1 key is 1 use but if you by multiple then you get several ie: 5 keys gives you 5 different tries. I haven’t bought mine yet, hope it will work!
Thank you for putting this together. I can't believe that Epson states that there is no maintenance box for the ET2760 model. There certainly is. It's in the same place your video shows. It may not have the chip, but who cares. Your work around to reset the software resolves the no chip problem. Thanks again for sharing!
Kevin and Inkchip were right on the mark for clearing and resetting my Epson ET-2650. Took apart and cleaned the "sponges", dried them off (using hairdryer), put back in, downloaded and ran the Inkchip software, and I am ready for another 20,000 pages printed! Of note - I did also manually clean the heads a couple times over her life using ammonia and manually sliding the print head over the paper towel in the print tray. Couple videos out there on how to do that too - works great. But Thanks to Kevin for the Waste Ink clean and reset - your computer science degree is GOLD in my book!
Do you have a link to that video? I can't find it in my search and my power clean and 5+ nozzle cleanings are not doing the trick on my 3210. I can finally sorta read some words but when I try to print, it prints an outline of the black object I'm printing and the test page barely shows the black and no yellow at all.
You really saved my day and my pockets. I had purchased an ET2720 in 2020. I used it once and turned it off. I purchased another but didn’t take I out of the box. Your step by step simple instructions have allowed me to continue using my current ET 2720. Thank you so much!!! Monroe, NC.
I have to say thank you SOOOOOOO much for creating this video! In the past when I have had this error come up I have just gone and bought a new printer, but after watching this, I just followed your steps and saved myself $400 plus! Thank you again!
Thank you Kevin. As Billr said, I cannot believe Epson builds a kill switch into their printers. You saved me a lot of grief and dollars! Your video was extremely clear and easy to follow. Had my key from Inkchip in less than five minutes. Best of luck to you and again, THANK YOU
This is my second Epson eco-tank the first one I just threw away after the tank got full but for this one I figured somebody’s had to come out with some thing and stumbled upon this and thank God I did because it just saved me $300 I have an Epson eco-tank 2760 I washed out the pads let them dry overnight put then i did the software and boom good as new printer you were truly a lifesaver it’s very easy to do once again thank you .
You are AWESOME, Kevin! I can't believe Epsom literally builds a killswitch in these printers, but thanks to you, another one is up and rolling again. And Ink-Chip had my key emailed within 5 mins of purchase. You are my hero! Thank you a billion times over.
Kevin, a big thank you. I had my printer boxed up ready to send to an Epson service center and they quoted nearly the price of a new printer. This saved me a ton of money and annoyance. Bookmarked your video and Inkchip. Thanks again.
Just used this video to clean the filters....AGAIN! Have only needed to purchase 1 key so far, and I print a lot. Thank you once again. So far you have tripled the lifespan I was meant to have with this printer!!
I won't lie, I was skeptical about this and buying the code from INKCHIP but it worked. I have an L3210 - cleaned out the waste tank as directed in your video and had to download the WIC file from a Windows computer (not for MAC). Also, make sure you enter the LONG code they send in the email. I was entering the order number because I didn't open the email fully and just saw that 6-digit number which gives you an error. If I'd watched the video Inkchip sent a link to, I'd have known better but I'm impulsive. Thank you, Kevin! I still have printing issues but at least I can clean the heads now.
RUclips's removed the dislike counter but I can safely say this tutorial worked amazingly! I run a small sticker business and have this exact printer to keep making stickers and this absolutely saved us! Thank you so much Kevin! ♥♥♥ For those wondering, my printer was at a full 100% ink tank filled according to the WIC thing. Took me about an hour for the whole process with 45 mins of that being cleaning the ink pads. Everything else is quick and straightforward.
@@BCHTechnologies maybe you can fix my other problem…any idea how to get the printer to stop printing “scanner status address”? It prints one like every 10 min and wastes paper. I have to turn the printer off when not in use
Yes!!!!! It worked. I`m so happy!!! After cleanig, getting the cable for the printer and loading the software...printing again! Thank you for your great video. Bettina (Germany,Berlin) ;-)
I can't thank you Kevin enough for the info and this video. It is amazing and I know have my printer working again. I must also add a HUGE thank you to InkChip for having what I needed and making it so easy to do!
Kevin, thanks for a great video that saved me buying a new printer. Your advice got me washing the pads and using the Inkchip utility to fix the problem. Wonderful!
I bought Epson ET-2760 in September 2021 with 3 year warranty. Last month InkPad message came up. Then called Epson help line and wasted my time. I bought this code, replace InkPad and done. 👍
Many ET-2750 have a software fault that prevent the power clean to operate. It is however also possible just to tilt the printer in all directions one after the other ( I dit it up to 60-70 degrees) and the printer is as god as new. It probably work because the obstruktion is often air bubles . Epson suggest to send the printerto a repear center to get the software fixed, but they suggest just to through the printer out.
I had an e-01 error at 18486 pages, around 170 pages from yours what are the chances! But seems just resetting all settings all the printer got it working again, at least for now, 20 pages in . I will update if still issues
do you have to reset the chip after you clean the maintenance box? I have a Epson et 4750 that I have cleaned the print heads and unclogged, but all I get is blank pages. I wanted to do a power cleaning but it needs the maintenance box changed. Any help would be appreciated. I really enjoy your videos. 😁
Hi Kevin, thank you for the informative video! I went to the site and saw et-3700 and assumed it would work with my 3760, but it doesn't. Is there another optin for the et-3760 to reset the ink tank?
Hi there Kevin, I came upon this video as I was looking up how to reset my Epson f2100 DTG printer. Would you by any chance know a method that I could accomplish this? I am going crazy trying to figure out how to get it past the 1A39 Error code, and Epson is no help at all.
Thanks! Any tips on jamming when trying to print on both sides? Rang epson and less then helpful. Just saying it needs a service even though its done it since the day I bought it!
me has salvado la vida y el trabajo... gracias mil por tan buena explicacion... no hablo ingles pero entendi todo la explicacion paso a paso ... eres un genio
Kevin I loved this and will subscribed. Interesting I just took a Biomedical Engineering Certification class at your Alma Mater. I am also starting out in the book for Dummies the CCNA course; oh I am not a programmer, but a BIO major so this is out of my comfort zone. They didn't have a book for Idiots which would be my level. May I ask you this question? In order not to have do a reset and stay ahead of this issue, could I clean before I get a message that shuts down my computer. I just did a booster clean as that was Epson video remedy and a wiser computer friend told me to keep doing a head cleaner as I thought my ink Cyan ink was clogged. Epson was no help by calling or any you tube, as the issue was the head cleaners. I did what he said. Keep doing it and check. I didn't have to do it 10 times only 5 + 1 times and that allowed me to get my Cyan ink working. My printer is the same model you have here 2750, so now I know to clean the waste pads that I just probably soaked. 2 + 4 mos. yr old printer
Its strange my 2750 says "out of paper". But when i run the roller cleaner it never has a problem with the paper for that. It seems Epson is very selective when it wants to be out of paper. I've done all the stuff I've seen online but I haven't tried to buy this software yet. I really think this is Epson's way of getting you to buy a new printer when there is nothing really wrong with your printer. It's all in there software.
Yes. This is just a warranty breaking hack. You also have to be wary of software companies that sell this type of firmware hacking as it can also break your hardware forever, called bricking.
Hi thanks for all your work do you know if the waste ink collector reference C13T04D100 is the one used in this printer ? There are two models of this container and one of them seems to be this exact one. It can be purchased for pretty cheap and I’m asking myself if it is worth it as epson doesn’t list this printer as compatible because they want us to go to their repair shop. If not I will no doubt try your method thanks again ! Sorry for my pretty bad English, French here and haven’t talk that much English in quite a while !
Hi Kevin, thanks for the great video! I did everything acc. to the instructions and resetted the counter, but now my printer says „waist inc pad counter was resetted by user, please contact epson support“. Also, it keeps saying I have a paper jam error all of a sudden (no paper in it and came directly after resetting the counter). Any idea how to fix this?? Thanks!
Hi Kevin. You have been very helpful. But I need reset for my Epson et-4850 and can't find it. It forms show in this website. Could you help please 🙏 Thank you
Thanks so much for subscribing and supporting the channel - every bit helps us get closer to the 100k goal! For the Epson ET-4850, the waste tank has a chip, so you'll need a physical chip resetter to get it working again. Models without chips can be reset using software like WIC Reset from inkchip.net, but unfortunately, that won’t work for the ET-4850. You will need a physicall resetter, which can be found easily online. Let me know if you need help finding the right resetter or if you have any other questions - subscriber questions are prioritized and answered within 48 hours!
Kevin, I replaced the waste ink tank and downloaded InkChip, but the Microsoft Visual C++ program never popped up to install. The process of rebooting my printer stopped here for me. Please help. Thank you!
This is why you shouldn’t do this on your own and just buy the maintenance cartridge. It might save you $12 in the short term but in the long term it could end up costing you the price of a new printer.
Hello Kevin, excellent Video. After resetting the waste ink counter, when you restart the printer; is it done by turning the printer "OFF" and then "ON" again? Please advise.
I have an epson et-2750. I’ve cleaned the waste pads as shown in the video. I downloaded the program from ink chip but I can’t find where to buy the key for my printer on ink chip. Any help would be greatly appreciated.
I opened up the back of this one and there was a spring that fell out. I can’t figure out where it goes and it won’t recognize that it’s loaded with paper? Can you show what the back of that looks like open?
I have the Epson ET-2851 brand new unused not even filled the ink tanks yet. The Waste ink Tank does not have a Chip in the slot. I wonder if anybody knows what this may mean.
Will this work with Mac? I don’t have windows but I need this so bad. I was supposed to print something yesterday and I thought I just needed to clean print head but after 2 print head cleaning, the 3rd nozzle check shocked me, it was blank. The first 2 still had colors except CYAN but with broken line. So I searched youtube and found this video. My printer is just about a year old 😔
Can you please show how to remove the printhead on 2750 printer. My black nozzle is stuck and I tried the cleaning kit, air pressure but nothing seems to unjam the nozzle. Thanks
Resource Used:
Company name: INKCHIP Solution For Chipless Printing
Web page: inkchip.net
Tel.:+372 8173 0240
Address: Level 15, Nexxus Building, 41 Connaught Rd Central, Central, Hong Kong
Email: info@inkchip.net
Whatsapp: +372 8173 0240
WeChat ID: inkchipnet
Link to download software: inkchip.net/soft
Canal RUclips: ruclips.net/channel/UCmPxfKYumxSyF6NL-_Ixhng
I’m looking @ inkchip.net and they don’t have a software for et 2720. How did you find one?
How do you bring up the key at buying it
@@kirstenbrewer5468 Are the keys one time use or you can use that key over and over on the same printer?
@@Miagarin- 1 key is 1 use but if you by multiple then you get several ie: 5 keys gives you 5 different tries. I haven’t bought mine yet, hope it will work!
Once you buy the key is it placed in a folder on your computer or???
Thank you for putting this together. I can't believe that Epson states that there is no maintenance box for the ET2760 model. There certainly is. It's in the same place your video shows. It may not have the chip, but who cares. Your work around to reset the software resolves the no chip problem. Thanks again for sharing!
Kevin and Inkchip were right on the mark for clearing and resetting my Epson ET-2650. Took apart and cleaned the "sponges", dried them off (using hairdryer), put back in, downloaded and ran the Inkchip software, and I am ready for another 20,000 pages printed! Of note - I did also manually clean the heads a couple times over her life using ammonia and manually sliding the print head over the paper towel in the print tray. Couple videos out there on how to do that too - works great. But Thanks to Kevin for the Waste Ink clean and reset - your computer science degree is GOLD in my book!
Do you have a link to that video? I can't find it in my search and my power clean and 5+ nozzle cleanings are not doing the trick on my 3210. I can finally sorta read some words but when I try to print, it prints an outline of the black object I'm printing and the test page barely shows the black and no yellow at all.
You really saved my day and my pockets. I had purchased an ET2720 in 2020. I used it once and turned it off. I purchased another but didn’t take I out of the box. Your step by step simple instructions have allowed me to continue using my current ET 2720. Thank you so much!!! Monroe, NC.
Looks like your ET-2720 was just waiting for its moment to shine! Glad I could help you unleash its full potential!
I have to say thank you SOOOOOOO much for creating this video! In the past when I have had this error come up I have just gone and bought a new printer, but after watching this, I just followed your steps and saved myself $400 plus! Thank you again!
Thank you Kevin. As Billr said, I cannot believe Epson builds a kill switch into their printers.
You saved me a lot of grief and dollars!
Your video was extremely clear and easy to follow. Had my key from Inkchip in less than five minutes.
Best of luck to you and again, THANK YOU
Thank you for your kind words! I'm so glad that my video was helpful.
This is my second Epson eco-tank the first one I just threw away after the tank got full but for this one I figured somebody’s had to come out with some thing and stumbled upon this and thank God I did because it just saved me $300 I have an Epson eco-tank 2760 I washed out the pads let them dry overnight put then i did the software and boom good as new printer you were truly a lifesaver it’s very easy to do once again thank you .
You are AWESOME, Kevin! I can't believe Epsom literally builds a killswitch in these printers, but thanks to you, another one is up and rolling again. And Ink-Chip had my key emailed within 5 mins of purchase. You are my hero! Thank you a billion times over.
Kevin, a big thank you. I had my printer boxed up ready to send to an Epson service center and they quoted nearly the price of a new printer. This saved me a ton of money and annoyance. Bookmarked your video and Inkchip. Thanks again.
Thank you for this solution, it just worked for me. You saved me from having to buy a new printer.
Can confirm this still works and I'm normally a skeptic on many things having IT experience!! Appreciate the help Kevin!!!!
Just used this video to clean the filters....AGAIN! Have only needed to purchase 1 key so far, and I print a lot. Thank you once again. So far you have tripled the lifespan I was meant to have with this printer!!
I won't lie, I was skeptical about this and buying the code from INKCHIP but it worked. I have an L3210 - cleaned out the waste tank as directed in your video and had to download the WIC file from a Windows computer (not for MAC). Also, make sure you enter the LONG code they send in the email. I was entering the order number because I didn't open the email fully and just saw that 6-digit number which gives you an error. If I'd watched the video Inkchip sent a link to, I'd have known better but I'm impulsive.
Thank you, Kevin! I still have printing issues but at least I can clean the heads now.
RUclips's removed the dislike counter but I can safely say this tutorial worked amazingly! I run a small sticker business and have this exact printer to keep making stickers and this absolutely saved us! Thank you so much Kevin! ♥♥♥
For those wondering, my printer was at a full 100% ink tank filled according to the WIC thing. Took me about an hour for the whole process with 45 mins of that being cleaning the ink pads. Everything else is quick and straightforward.
What paper type did you use for your stickers/labels?
omg THANK YOU! it worked! I just lost it on the folks at epson and YOU got it to work again! THANK YOU!
You're welcome!
@@BCHTechnologies maybe you can fix my other problem…any idea how to get the printer to stop printing “scanner status address”? It prints one like every 10 min and wastes paper. I have to turn the printer off when not in use
Well hey there fellow Greensboro guy, I'll have to stop by and say hello one day. I'm studying at the airport so I'm very local to BCH. Awesome video!
God Bless your heart!!!! 😀 I just saved $500 by following step by step your video! THANK YOU SO MUCH!
Yes!!!!! It worked. I`m so happy!!! After cleanig, getting the cable for the printer and loading the software...printing again! Thank you for your great video. Bettina (Germany,Berlin) ;-)
I can't thank you Kevin enough for the info and this video. It is amazing and I know have my printer working again.
I must also add a HUGE thank you to InkChip for having what I needed and making it so easy to do!
You are welcome!
And yet again, I'm back to recheck your procedure, then off to get another key! Still going strong with my 2750!
Thank you so much! i use my printer for sublimation and was freakingout beacuse i changed the ink pad and couldnt get it to reset! youre a lifesaver
Kevin, thanks for a great video that saved me buying a new printer. Your advice got me washing the pads and using the Inkchip utility to fix the problem. Wonderful!
I bought Epson ET-2760 in September 2021 with 3 year warranty. Last month InkPad message came up. Then called Epson help line and wasted my time. I bought this code, replace InkPad and done. 👍
Nice 👍!!!
Kevin your videos have saved me more than once! Thank you!
I'm so glad to hear that my videos have been helpful for you! That's what I'm here for!
Really appreciate you putting content out like this. Saved me a lot of hassle and confusion.
THE BCH SONG IS SO GOOD BRO!! IT PUT A SMILE ON MY FACE!! I NEED THE FULL VERSION PLEASE!!! LOL :) LOVE IT~
I Clean My Own Maintenance Box... Easy to do it yourself! I've had My ET-4750 since 2014 still Working Fine!
Many ET-2750 have a software fault that prevent the power clean to operate. It is however also possible just to tilt the printer in all directions one after the other ( I dit it up to 60-70 degrees) and the printer is as god as new. It probably work because the obstruktion is often air bubles . Epson suggest to send the printerto a repear center to get the software fixed, but they suggest just to through the printer out.
Great job Kevin. Very clear, concise instructions. Thank you
If someone is getting errors related to waste pads, absolutely give this a try. It worked for my et-2750
Thanks for the great video! Anyone else think the printer hardware industry is a bit of a scam?
I somewhat feel this way.
Worked 100%. You have a customer for life.
Many thanks!
I had an e-01 error at 18486 pages, around 170 pages from yours what are the chances! But seems just resetting all settings all the printer got it working again, at least for now, 20 pages in . I will update if still issues
Thank you I am not computer savvy
And your help was amazing you explain every
Detail thank you again!!!!
Thanks for your very good video - but where did you get the "INPUT RESET WASTE INK KEY" - Would be great if you could help me.
Thanks !!!!
Do I have to purchase the key after cleaning the pads?
Will it work properly after cleaning the pads without the new key?
Thank you. Grateful for your clear & concise guidance. Thank you!
Should I empty my external tank? Does the printer know how many power cleanings I have done and will give another error or how does that work?
do you have to reset the chip after you clean the maintenance box? I have a Epson et 4750 that I have cleaned the print heads and unclogged, but all I get is blank pages. I wanted to do a power cleaning but it needs the maintenance box changed. Any help would be appreciated. I really enjoy your videos. 😁
Hi Kevin, thank you for the informative video! I went to the site and saw et-3700 and assumed it would work with my 3760, but it doesn't. Is there another optin for the et-3760 to reset the ink tank?
Super helpful video Kevin! Worked like a charm.
it works for me, thanks for your help 100%
You're welcome!
Hi there Kevin, I came upon this video as I was looking up how to reset my Epson f2100 DTG printer. Would you by any chance know a method that I could accomplish this? I am going crazy trying to figure out how to get it past the 1A39 Error code, and Epson is no help at all.
Thank you for the excellent tip! Following your guide worked perfectly.
Thanks! Any tips on jamming when trying to print on both sides? Rang epson and less then helpful. Just saying it needs a service even though its done it since the day I bought it!
Thanks for your video. I followed the routine and everything seems fine so far. Cheers.
Followed your instructions and of course it works! Thank you!
You're welcome!
Oh my goodness! I love his sense of humor. 🤣
Oh my goodness, you and I should start a fan club! Membership includes unlimited laughter 😂
me has salvado la vida y el trabajo... gracias mil por tan buena explicacion... no hablo ingles pero entendi todo la explicacion paso a paso ... eres un genio
Muchas gracias. Pondré subtítulos en español en el video, así que ayudará.
Thank you Kevin you have really helped me. I have the ET2750 and the et3700 will it work on both?
If we put the external waste tank in will epson still stop printing after awhile? I got the trial reset and it only lasted one day.
Hi Kevin, I have a ET2750 and it is printing blank pages. The head is not clogged but it is printing blank pages. Do you know what's wrong?
Is there a way to reconstitute the ink? There is a massive amount in the pads. Takes awhile to wash it out.
Why wouldn't Epson panel support resetting the counter? How does it support buying new tank? Wouldn't it then reset the counter?
Kevin I loved this and will subscribed. Interesting I just took a Biomedical Engineering Certification class at your Alma Mater. I am also starting out in the book for Dummies the CCNA course; oh I am not a programmer, but a BIO major so this is out of my comfort zone. They didn't have a book for Idiots which would be my level.
May I ask you this question? In order not to have do a reset and stay ahead of this issue, could I clean before I get a message that shuts down my computer. I just did a booster clean as that was Epson video remedy and a wiser computer friend told me to keep doing a head cleaner as I thought my ink Cyan ink was clogged. Epson was no help by calling or any you tube, as the issue was the head cleaners. I did what he said. Keep doing it and check. I didn't have to do it 10 times only 5 + 1 times and that allowed me to get my Cyan ink working. My printer is the same model you have here 2750, so now I know to clean the waste pads that I just probably soaked. 2 + 4 mos. yr old printer
I was a Bio major too! My dad picked it for me. I finished it then switched to computer science.
It could be the printhead is fine, just the damper needs to be primed.
is the key good only for a single reset? or multiple times for a single printer?
So, everytime I need to reset the ink waste I need to purchase a key? Is there a permanent solution? My printer is et 3750
How do you check the counter to see how full it is. Online?????
When I try to get the waste ink pad count, the program locks up and shows "Not responding".....any tips?
Hi, is there another program that supports the Epson ET 8550?
This worked perfectly, thank you so much!
Its strange my 2750 says "out of paper". But when i run the roller cleaner it never has a problem with the paper for that. It seems Epson is very selective when it wants to be out of paper. I've done all the stuff I've seen online but I haven't tried to buy this software yet. I really think this is Epson's way of getting you to buy a new printer when there is nothing really wrong with your printer. It's all in there software.
Would this work on a SCF-170 sublimation printer?
Awesome! Does it works for the ET2650 so easy thankyou
So when you buy a new maintenance box (sponge) does the counter reset?
Yes. This is just a warranty breaking hack. You also have to be wary of software companies that sell this type of firmware hacking as it can also break your hardware forever, called bricking.
Oh man, you made my day 😂🫡
How would I reset my counter on my Epson et 2650 I only use my phone and printer any help much appreciated thanks
Hi thanks for all your work do you know if the waste ink collector reference C13T04D100 is the one used in this printer ? There are two models of this container and one of them seems to be this exact one. It can be purchased for pretty cheap and I’m asking myself if it is worth it as epson doesn’t list this printer as compatible because they want us to go to their repair shop. If not I will no doubt try your method thanks again !
Sorry for my pretty bad English, French here and haven’t talk that much English in quite a while !
Hi Kevin! You said the eco tank printer with 18,300 pages is almost new. What’s the highest page count you’ve ever seen on an eco tank printer?
My ET-2750 shows a count of 34,847
i did this an reset an the black is printing somwtimes what should i do i do alot of nozel cleaning
Hi Kevin, thanks for the great video! I did everything acc. to the instructions and resetted the counter, but now my printer says „waist inc pad counter was resetted by user, please contact epson support“. Also, it keeps saying I have a paper jam error all of a sudden (no paper in it and came directly after resetting the counter). Any idea how to fix this?? Thanks!
Let me check
I am having the same issue. My printer is now a paper weight.😟
I have an Epson ET-2720 is there a download availible from any safe place? I guess INKCHiP does not have one.
I have the same printer and cannot find a download either.
Hi Kevin. You have been very helpful. But I need reset for my Epson et-4850 and can't find it. It forms show in this website. Could you help please 🙏
Thank you
Thanks so much for subscribing and supporting the channel - every bit helps us get closer to the 100k goal! For the Epson ET-4850, the waste tank has a chip, so you'll need a physical chip resetter to get it working again. Models without chips can be reset using software like WIC Reset from inkchip.net, but unfortunately, that won’t work for the ET-4850. You will need a physicall resetter, which can be found easily online. Let me know if you need help finding the right resetter or if you have any other questions - subscriber questions are prioritized and answered within 48 hours!
Hi Kevin, how much is the key I need to buy. I print about 20,000 per year.
Thanks
Felix
Kevin, I replaced the waste ink tank and downloaded InkChip, but the Microsoft Visual C++ program never popped up to install. The process of rebooting my printer stopped here for me.
Please help. Thank you!
I get black ink pooling under my 2750 at times, especially if I move it. Is the ink pad the issue?
This is why you shouldn’t do this on your own and just buy the maintenance cartridge. It might save you $12 in the short term but in the long term it could end up costing you the price of a new printer.
I'm so happy to see your vid! 1001 thanks!!!
when i go to the inkchip site, the ET series aren't listed anymore. Any other ideas?
Hello Kevin, excellent Video. After resetting the waste ink counter, when you restart the printer; is it done by turning the printer "OFF" and then "ON" again? Please advise.
Yes
My computer keeps saying "not responding" when i try to do the waste ink counter??
Are all the ink pads inside that box or are there any more somewhere else?
This fixed the error, but now zero ink is coming out. Have tried nozzle and head cleaning, but nothing :(
I have an epson et-2750. I’ve cleaned the waste pads as shown in the video. I downloaded the program from ink chip but I can’t find where to buy the key for my printer on ink chip. Any help would be greatly appreciated.
inkchip.net/price/ Click on the "Add to cart" next to WIC Adjustment Program.
Please help me kevin....i dont understand about the virus thing before downloading inkchip...please explain to me like i was child ...im slow
Do this software works with an ET-2803?
How do you find your input reset waste ink key?
what if i but a new chip in do i have to bye the code to get it back to 0
I opened up the back of this one and there was a spring that fell out. I can’t figure out where it goes and it won’t recognize that it’s loaded with paper? Can you show what the back of that looks like open?
I am not sure but check the pickup arm.
Thank you so much Kevin! Worked like a charm :)
Awesome. Does it works for the L4150 is the same process?
Yes. For other models, check inkchip.net/wic/ and make sure the model is listed. The the rest are the same.
Its work by et3750
Hola, Excelente video. No se si me puedes ayudar, tengo una impresora igual y me da el error 031006, te lo agradecería mucho.
I have the Epson ET-2851 brand new unused not even filled the ink tanks yet. The Waste ink Tank does not have a Chip in the slot. I wonder if anybody knows what this may mean.
You are a life saver!!! Thank you sooooooo much!!!
Would restoring to factory default settings also reset the waste tank counter?
I don’t think so.
Brilliant. Thank you so much, great video.
is is the same as a epson et-2760, im getting the ink pad needs service message
this procedure can work on epson ET4750?
How can I fix it for a Epson ET 2803
Will this work with Mac? I don’t have windows but I need this so bad. I was supposed to print something yesterday and I thought I just needed to clean print head but after 2 print head cleaning, the 3rd nozzle check shocked me, it was blank. The first 2 still had colors except CYAN but with broken line. So I searched youtube and found this video. My printer is just about a year old 😔
I think they only make it for PC. You only need a PC for a few minutes, can borrow from a friend.
Can you please show how to remove the printhead on 2750 printer. My black nozzle is stuck and I tried the cleaning kit, air pressure but nothing seems to unjam the nozzle. Thanks
Did you figure it out?