hello sir i bought it 16 days ago and it has arrived, i installed it on my desk and it fitted perfectly ( on the side ) because i coudlnt make it trough the back of my desk because my desk has a desk lip , unfortunely my nbf80 is tighten too hard i have to force it tio be adjusted. But all now no problem, this product is awesome i am so good with this. thanks for this video sir
Sir nice video, I was just wondering, when mine finally came, I tried to twist the head piece (the one that connects to the monitor) in a counter clock wise position, as you can see, we have the same orientation when you opened your box. May I ask, how were you able to twist it? Wouldn’t it break the plastic? I’m not referring to the tilt, I’m asking about the clock wise or counter clockwise positioning of it, is there any way for me to loosen it up?
Hello bos. Nak tanya, saya baru ja beli arm ni. Tapi arm bahagian gas strut tu macam keras. Dia tak boleh nak tekan atau nak naikkan. Memang tegak ja tak turun pun. Even dah mount monitor pun still keras. Saya dah try adjust allen key untuk torque tu still tak gerak. Kenapa ya?
Bro I have a problem on twisting the part that is attached to the monitor, you have twisted it in the video on 7:08-11. The part that is attached to the monitor is not straight, it is twisted and when I try to adjust it, it is just tooo hard to be adjusted. Please help pls help
Salam Bos.. untuk minit ke 8.49 tu bos pusing arah lawan ka arah jam nak adjust arm tgh tu? saya cuba bnyak kali x boleh lentur haha.. mohon pencerahan
wasalam.. kalau dia, kita ubah arm, dia naik balik.. kena ikut arah jam.. untuk lower kn torque.. kalau dia lembut/atau position dia xstay.. kena lawan jam.. kuatkan torque..
@@MuhdAR owh so nak bagi trun ikut arah jam lah nak bagi dia trun.. sbb default position dia kan tinggi sngt so nak rendah kan skit dan stay kat situ.. okok terima kasih tuan
Hi! Sana po masagot niyo po ito, yung mismong bracket ng mount ko po shaped po siya na diamond instead of square, paano po kaya na-adjust yung part na yun?
Hello sir!! I have the same monitor mount as yours. And I am having difficulties with it, i can't seem to push it down or adjust the arm to move downward or upward.. Like you did in 8:34 and 8:43 please help me
@@abbycastillo5703 so you need to make the screw counter clockwise to loosen it a little.. need few time trying until you make its right.. neither too tight nor too loose..
This happen to me too. The screw is too tight, whether I move it clockwise or counterclockwise. Seems like the gas trut isn't working to me. Pls help me sir
@@ridhoprasetiawan8591 try counter clockwise the screw to loose it.. but make sure you try few times.. have to try few times to get the right position for your monitor..
![COLOMBIA vs. CHILE [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/TDjN4W3yy1k/mqdefault.jpg)
hello sir i bought it 16 days ago and it has arrived, i installed it on my desk and it fitted perfectly ( on the side ) because i coudlnt make it trough the back of my desk because my desk has a desk lip , unfortunely my nbf80 is tighten too hard i have to force it tio be adjusted. But all now no problem, this product is awesome i am so good with this. thanks for this video sir
That 5th part is really a pain in the buttttttt 😂😂😂. Bdw nice video man.
Thanks alot brother. Your video helped alot.
Sir nice video, I was just wondering, when mine finally came, I tried to twist the head piece (the one that connects to the monitor) in a counter clock wise position, as you can see, we have the same orientation when you opened your box. May I ask, how were you able to twist it? Wouldn’t it break the plastic? I’m not referring to the tilt, I’m asking about the clock wise or counter clockwise positioning of it, is there any way for me to loosen it up?
same. Were you able to fix it?
thank you so much, for 08:50.
yeah i can clearly watch what you are doing thanks
Thank you
You help me a lot 😊😊😊😊😊
the main arm that connects the monitor is soo hard. I might return this shit
Remove the monitor then adjust it, should be able to
Sir, pano mo napagkasya yun monitor cable dun sa baba ng north bayou para matago?
Monitor arm installation ke bad dekh. Rha hun😂
Great video!
Hello bos. Nak tanya, saya baru ja beli arm ni. Tapi arm bahagian gas strut tu macam keras. Dia tak boleh nak tekan atau nak naikkan. Memang tegak ja tak turun pun. Even dah mount monitor pun still keras. Saya dah try adjust allen key untuk torque tu still tak gerak. Kenapa ya?
Samela keras xbole gerak lansung
thx bro
Bro you have strong hands it was hard to twist the damn thing haha
Je ne savais pas régler la tension du ressort ... Now I know !!!
Bro I have a problem on twisting the part that is attached to the monitor, you have twisted it in the video on 7:08-11. The part that is attached to the monitor is not straight, it is twisted and when I try to adjust it, it is just tooo hard to be adjusted. Please help pls help
same. Were you able to fix it?
@@dennisemarieminoza3956 Yes, I did. Applied a little bit of force and it twisted. Just apply more force gently and it will turn
@@brianmatlwa5725 Thank you! I nearly sent back mine because of this issue.
Were you able to bend down the arms as well? I have a hard time bending the arms and the part attached to the monitor
@@shairamaeguarin608 yes I did. Applied a little bit pressure and it worked out. Hope it works out for you
What monitor is it 24" or 27"?
I did it thx 💕
5th step is the hardest 😅
Macam mana kamu pusing untuk vesa100x100 tu ? Sy pusingtak boleh sebab terlalu ketat
pusing ke arah lawan jam untuk longgar kn ia..
how close to desk can you adjust your monitor arm ?
very close.. I can put the monitor very close to the top of the table..
Salam Bos.. untuk minit ke 8.49 tu bos pusing arah lawan ka arah jam nak adjust arm tgh tu? saya cuba bnyak kali x boleh lentur haha.. mohon pencerahan
wasalam.. kalau dia, kita ubah arm, dia naik balik.. kena ikut arah jam.. untuk lower kn torque.. kalau dia lembut/atau position dia xstay.. kena lawan jam.. kuatkan torque..
@@MuhdAR owh so nak bagi trun ikut arah jam lah nak bagi dia trun.. sbb default position dia kan tinggi sngt so nak rendah kan skit dan stay kat situ.. okok terima kasih tuan
Hi! Sana po masagot niyo po ito, yung mismong bracket ng mount ko po shaped po siya na diamond instead of square, paano po kaya na-adjust yung part na yun?
mantap la adlrnok
niligtas nyo buhay ko! salamat sa comments nyo!
Meron po ba silang kaya ang 34 inch ultrawide monitor ng Mi?
boss i have the same type of monitor mount and hindi ko rin mapush yung arm pababa and pataas like what you did in 8:53
you need to make the screw counter clockwise to loosen it a little.. need few time trying until you make its right.. neither too tight nor too loose..
@@MuhdAR I have the same problem but the problem is the allen screw cannot fit in since it is lock shut in straight position
@@brokills6811 hi any updates? same problem too
hello ask for height can bite / thick table ?
bro what is your monitor's model
AOC 24G2E5
Pano pluwagan yung rotate
VALEU
I can't control the height
Hello sir!! I have the same monitor mount as yours. And I am having difficulties with it, i can't seem to push it down or adjust the arm to move downward or upward.. Like you did in 8:34 and 8:43 please help me
have you already put the monitor to the arm?
@@MuhdAR yes sir. And i have also troubles in adjusting the screw where it holds the tilt motion because its too tight
@@abbycastillo5703 so you need to make the screw counter clockwise to loosen it a little.. need few time trying until you make its right.. neither too tight nor too loose..
This happen to me too. The screw is too tight, whether I move it clockwise or counterclockwise. Seems like the gas trut isn't working to me. Pls help me sir
@@ridhoprasetiawan8591 try counter clockwise the screw to loose it.. but make sure you try few times.. have to try few times to get the right position for your monitor..
hahaha same monitor same mouse pad xdd
monitor how inç
Video lena seekh le