Old Car battery convert to lithium

Поделиться
HTML-код
  • Опубликовано: 6 мар 2022
  • I made this battery primarily for my spot welder.. but still you can use it for automotive but it needs more insulation inside the box.
  • НаукаНаука

Комментарии • 366

  • @jeanyluisa8483
    @jeanyluisa8483 Год назад +12

    Wow, thats pure ingenuity. Turning an old battiery into an empty box for a new battery and solving the environmental problems of flushing acid and throwing lead and plastic on the ground by a label in the video saying "be cautious on battery waste".
    When bilding such a lithium battery, a proper box or housing usually would be the cheapest part.

    • @Snowaxe3D
      @Snowaxe3D Год назад +2

      Environment? Lol what part of the world are you from that doesn't damage the "environment"?

    • @jeanyluisa8483
      @jeanyluisa8483 Год назад

      @@Snowaxe3DObviously I am from a part of the world where we do not promote it as an ingenious idea to poison the water we drink and the ground our kids play on.
      Of course we do a lot of harm here to the environment too, but does that mean we have to like it and do it for no reason?

    • @OzgursDen
      @OzgursDen 2 месяца назад

      Should be Tibetian :D@@Snowaxe3D

  • @Osman-bp6js
    @Osman-bp6js 3 месяца назад +1

    This guy is no ordinary.he must have a good background in electricity science.tq

  • @eone2345
    @eone2345 2 года назад +41

    I made the same project for my car battery last year using the same old battery case. It have 16 cells inside, about 12volt 20ah enough to crank the car for about 8 times in one session. The performance was much greater because it didn't slowly discharge like lead acid and it cranks smoothly. I used special BMS that can support up to 800Amp (as per seller claim). You idea of only using active balancer was good too, never thought of that.
    You should properly dispose the old acid to protect the environment. I kept the old acid solutions inside my empty shower bottle. You can use them later on for plating purposes. The lead also can be melt and recycle for other suitable DIY project or sell them to recycling center.

    • @albertnario4877
      @albertnario4877  2 года назад +4

      I will actually use it on a spot welder, that's why I don't use BMS and put voltmeter.. but yes it really good battery replacement on our car battery..

    • @eone2345
      @eone2345 2 года назад

      @@albertnario4877 ohh.. that's why 👍

    • @aznative_
      @aznative_ 2 года назад +4

      That's really cool. Are there any issues or modifications needed to charge from the alternator?

    • @eone2345
      @eone2345 2 года назад +1

      @@aznative_ so far so good. No modification done at all on car alternator. I'll share some quite ugly pictures of the battery before the new modications to beautify it.
      ruclips.net/user/shortsbauGhizjiIY?feature=share
      I totally forgot to snap the 'after' pictures and video of the new modifications. Sorry for that. Hopefully I'll upload that in near future.

    • @nareshaggarwal3230
      @nareshaggarwal3230 2 года назад

      For how much amount such a battery 12v,100 AH can be procured with complete address of the person/ shop from whom a fully robust battery can be procured.

  • @waynegabler6570
    @waynegabler6570 Год назад +7

    Nice, if you put the empty case in the freezer for a few hours the cell dividers will shatter like a piece of glass, almost. Side cutters will clean up the edges. I put 1.2 styrofoam in the bottom 12v22ah sla battery. Screwed the lid on so I can reuse the case down the road.

  • @letsgobrandon8661
    @letsgobrandon8661 Год назад +2

    Amazing how his toes haven’t rotted away.

  • @wadetaylor4697
    @wadetaylor4697 10 месяцев назад +2

    🔥 Just 1 cell bursts and catches 🔥, by by car!

  • @kombi9648
    @kombi9648 Год назад +6

    Is there a parts list. I would love to build one for my 12v accessories. While camping

  • @ohcrapwhatsnext
    @ohcrapwhatsnext 2 года назад +3

    Be cautious on battery waste? Dump the acid on the earth. lol ok Kudos....Great work.. Glad to see you using what you learned about electronics....Creating is living...

    • @fauxque5057
      @fauxque5057 2 года назад +1

      Be careful and don't get it on you, or in your eyes.
      The earth will be fine

  • @de-libangant.v3088
    @de-libangant.v3088 Год назад +1

    Ang galing naman nito... iba Ang talent mo boss

  • @madrx2
    @madrx2 2 года назад +2

    "Be cautious on battery waste" procedes to tip all over ground "

  • @rigilkentaurus3313
    @rigilkentaurus3313 Год назад +2

    What parts did you use and what is the final spec of the battery?

  • @michaelbrownlee9497
    @michaelbrownlee9497 Год назад +1

    Pretty stealthy too!

  • @noon8493
    @noon8493 Год назад +1

    This guy is either an electrician or a genius! Lol

  • @Zerpentsa6598
    @Zerpentsa6598 Год назад +1

    In certain countries, you can cut one open and dump the old contents anywhere, making the project viable. But you can only do that in Europe if no one sees you, like fly tipping.

  • @artfrank8218
    @artfrank8218 Год назад +2

    Could you list, parts for battery build and especially spot welder

  • @warrenedser1996
    @warrenedser1996 Год назад +11

    Shows you have intelligence with knowledge. How much did all the materials cost including the hardware? How long did your battery last when driving? Did you have any problems of temperature and shocks of the car shaking it up? How long and how did you keep it charge or how long did the charge last? Keep adding your videos. Well done.

    • @xsauce3858
      @xsauce3858 Год назад +9

      Battery last while driving? It cannot be use. Because unlike lead acid battery, lithium battery cannot tolerate all the Heat from the engine and will quickly damage the battery.

    • @ekkanofiqandriyana7325
      @ekkanofiqandriyana7325 Год назад +1

      ​@@xsauce3858you don't have to put the battery side to side with the engine, you can place it somewhere inside the cabin.

    • @Krashworship
      @Krashworship 10 месяцев назад

      Good idea , that way when the battery explodes it wont hurt the dirty side of your firewall..

  • @guttermastersplus5613
    @guttermastersplus5613 Год назад +1

    Looks like a nice project but question is is it cheaper to make one or could you just buy that unit already assembled most people don't have the knowledge to do what you do I think Safeway would be by unit intact

  • @electroumit
    @electroumit Год назад

    Congratulations. Good job.

  • @maverickxyph239
    @maverickxyph239 Год назад

    Bro for 1sm battery, what will be the max AH setup?

  • @GregNFresh
    @GregNFresh Год назад +2

    Cleaning on the floor: you are unconscious.

  • @altvamp
    @altvamp Год назад +2

    Interesting but I wonder was it worth the time and expense, also a couple of things I noticed, the charge controller doesn't seem heavy duty enough to replace the power used, the other is that those wires to the terminals don't look thick enough to carry the 100A+ the starter needs, I suspect the whole thing would go up in smoke if fitted.

    • @sali-ali
      @sali-ali Год назад

      I did the same with 18650 (2500 mAh LG) batteries few years ago, it lasted only 6 months. It's a lot cheaper to use accumulator (car battery)

  • @BLAZEPSI
    @BLAZEPSI 5 месяцев назад

    Great Build. If I may add, LIPO is not good when exposed to heat for a long time, engine bay is not a good place for it. I would relocate it to the trunk for batteries longetivity.

  • @danilomanrique3853
    @danilomanrique3853 Год назад

    just a sugestion you could add a touch button to turn off the voltage indicator and use the sealing spray to make it waterproof

  • @shivakumarhiremath5560
    @shivakumarhiremath5560 2 года назад +2

    Nice

  • @corinasimionescu5504
    @corinasimionescu5504 Год назад

    Ești un geniu. Ce e asta, dacă nu greșesc, e un generator.

  • @spavliskojr
    @spavliskojr 2 года назад +32

    Theres no way those delicate connections and microcontrollers would hold up to an automotive application. The temperature extremes and road vibrations would kill it pretty quickly. it would need to be an vibration isolated reinforced circuit and enclosure. not to mention like others said... just use another plastic box. no need to pollute and use a car battery shell.

    • @fauxque5057
      @fauxque5057 2 года назад +1

      Lithium batteries aren't high amperage drain batteries either. More of a deep cycle steady drain battery. They do sell Super Caps that work with your Lithium battery and will store the surge needed to crank a car.

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

    • @WilliamDye-willdye
      @WilliamDye-willdye Год назад +2

      He's using it to power a spot welder -- hence the voltmeter. The automotive demonstration was just to show off that it can even start a car.

    • @davebeck8973
      @davebeck8973 Год назад

      Only a temporary battery, you get a couple of uses out of it.

    • @kwalaporkompor3447
      @kwalaporkompor3447 Год назад +1

      In everything you said, nothing is accurate....for the temperature, there is a solution you can put inside your car or you can put a heat absorber around it...for the vibration, there is no problem as long as you are properly positioned inside of the container and it doesn't move, I'm sure the wire and batt cells won't be damaged ... as for using another box, you'll have a hard time molding a container while the container of your old battery is already molded into your car... The circuit that you are talking about has specs, all of them must be correctly installed, there is another 200AH that can be purchased and the one that is installed is an active balancer for each cell so that the charging is equal in every batt cell norhing more nothing less....you have many problems, all of them can be solved.

  • @Lupelu831
    @Lupelu831 Месяц назад

    Love the ending. Lithium Inside. 😅

  • @gbadishomeassistant748
    @gbadishomeassistant748 Год назад +1

    What about battery balance ???? or in case of fire ??

  • @corinasimionescu5504
    @corinasimionescu5504 Год назад

    Baterie.de mașină, ești un fenomen.

  • @karyotv2357
    @karyotv2357 Год назад

    Ang lupit mo pre...

  • @c.h.6390
    @c.h.6390 Год назад +1

    --- Did you really wash away the old acid with a water hose? I am shocked. ---
    Hast Du die Alte Säure wirklich mit einem Wasserschlauch weggespült? Ich bin fassungslos.

  • @UnknownPerson-cl9di
    @UnknownPerson-cl9di 3 месяца назад

    I'm happy you didn't use the ordinary 18650 but yes... I doubt these batteries will suit the requirements of most 12v appliances, these batteries have a huge voltage range, you probably need a lot of diodes and boost converters for it to suit an inverter or smth
    but again.. because your application is a spot welder ig it's fine

  • @sddiymakeitworthit7512
    @sddiymakeitworthit7512 2 года назад +2

    Super awesome job 👍

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @cezariusus7595
    @cezariusus7595 Год назад

    How long will it last against the heat?

  • @jochenmuller9388
    @jochenmuller9388 Год назад +3

    Smart idea! Well done! Thanks for your video! 😀👍

  • @gliderman1176
    @gliderman1176 Год назад +1

    Youuu to be...... I'm ready for the cardboard jet... They do a good job at hiding the string

  • @4555joe
    @4555joe 2 года назад +1

    How long will last? cost? …Why the car industry does not used then???

  • @saeedchughtai3564
    @saeedchughtai3564 Год назад +1

    Why not buy lithium battery with a warranty?

  • @faikaykac
    @faikaykac 2 месяца назад

    Hi, are you using this battery at your car still?

  • @haemse
    @haemse Год назад +1

    What cells?

  • @mukeshpatel5495
    @mukeshpatel5495 2 года назад

    भाई, जब्बर जस्त काम किया।

  • @2hami
    @2hami 2 года назад +1

    Thank you for this share, I liked so much

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @NewsBroadcasting
    @NewsBroadcasting Год назад

    best video on youtube. how many CCA?

  • @jetroompoc3736
    @jetroompoc3736 2 года назад +4

    Much better they have switch for voltage display indicator, since they consuming current when not in used

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @VCanisMajorisY
    @VCanisMajorisY 2 года назад +1

    Security. Fix it in the boot of the vehicle with extension wires less heat and vibrations. .

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @ubogyi4656
    @ubogyi4656 Год назад +1

    How much the weight of battery reduced?

  • @thiyagarajanpy6273
    @thiyagarajanpy6273 Год назад +1

    Can UPS 600VA battery for computer to lithium battery?

  • @hstechnicalsolution8102
    @hstechnicalsolution8102 2 года назад +1

    Helping Others In Their Tough Of Need Is The Best Gift Of Humanity So Your One Click Can Change Whole Life ♥️ ♥️ ♥️🙏🙏

  • @ismaelsilguero6016
    @ismaelsilguero6016 Год назад +5

    Es muy ingenioso, pero poco educativo en cuanto a la protección del medio ambiente. Básicamente por el mal manejo de los desechos de la batería, que son vertidos directamente al suelo, y que es conocido por la mayoría de las personas el grado de peligrosidad de los mismos. Incluso no se ve que vista equipo de protección adecuado para evitar algún tipo de lesión o daño a si mismo.

  • @HongNguyen-mh9gk
    @HongNguyen-mh9gk Год назад

    Trông đơn giản nhưng công nghể phức tap .quá chi tiết kỹ cáng đúng là phải hoc mới biết mà làm

  • @nethmadissanayake5846
    @nethmadissanayake5846 Год назад +1

    How many Time have a charge ?🙂

  • @markbooe205
    @markbooe205 2 года назад +1

    Great job 👌

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @walter111
    @walter111 Год назад +3

    What tool are you using to weld the batteries strips together?

    • @rscervin9950
      @rscervin9950 Год назад

      Hi. It's called a spot welder. You can make one yourself from a microwave transformer

    • @walter111
      @walter111 Год назад

      @@rscervin9950 Ty

  • @martinonumero
    @martinonumero Год назад

    What BMS to use ?

  • @sharukhmatekuki5830
    @sharukhmatekuki5830 2 года назад +1

    Well done 👍🏻👍🏻 🇮🇳 || Kuki 08|03|2022

  • @GianF123
    @GianF123 2 года назад +2

    That Yellow connector Is not good for strong current.

  • @stfnsipos
    @stfnsipos Год назад +1

    Costs???

  • @practicallab
    @practicallab 2 года назад

    good work

  • @bryanacebedo1001
    @bryanacebedo1001 2 года назад +2

    nice video sir ! 👌

    • @practicallab
      @practicallab 2 года назад

      ruclips.net/video/QcwfiGCd_qE/видео.html

  • @sleepingwarrior4618
    @sleepingwarrior4618 5 месяцев назад

    Remember boys and girls.....there are some people on this earth right now....that thing "given enough time, this battery could create itself".

  • @haemse
    @haemse Год назад +2

    Which of those spot welders do you recommend? Do you have a link to them?

    • @samohraje2433
      @samohraje2433 Год назад +2

      I have Minder RC DH30 Max with the highest capacity and it can weld 0.2mm pure nickel strip at highest setting but i had to do a small change. When i was spotwelding my battery pack for portable speaker, the board just started smoking. Than i discovered, the manufacturers does not know the ammount of current going from the battery, via the traces on the PCB to the leads. You need to add a bit of solder along the entire lenght of the traces, positive, negative and MOS's. The you'll be safe to solder but i reccomend to spot like 15 spots and then wait a bit for the temp go down. Otherwise you could destroy it. I don't know the other spotwelders but this one from alliexpres doing its job like it shoul be.

    • @haemse
      @haemse Год назад +2

      @@samohraje2433 thank you for the response! For me it seems you show two different spot welders the one you build it with and then another one you plug to the battery at 08:15
      Which one do you consider better? thx

  • @billybbob18
    @billybbob18 2 года назад +1

    How do you balance charge it? You would need a balance cable with 48 wires coming off of that.

    • @gelo5606
      @gelo5606 2 года назад

      There is no need in it - this battery will die before it will need a balance :) It’s to hot under there, it will be overcharged, vibration. All of this will this pack quick enough and hopely won’t explode/burn.

    • @albertnario4877
      @albertnario4877  2 года назад +1

      I installed extra balance wire that can be accessed on plastic screw.

  • @arulraj3076
    @arulraj3076 Год назад

    Good show ! Thanks.

  • @hussein26002
    @hussein26002 Год назад +1

    Nice idea and smart..
    ((( But this dangerous because in a high weather or from engine..)

  • @ReviewsandTech
    @ReviewsandTech Год назад +4

    Nice conversion bro, can you build a 100Ah LifePo4 battery with BMS? Excellent video bro, thank you sir.

  • @sirdhojtamang9140
    @sirdhojtamang9140 2 года назад +8

    Idea to convert old Lead -Acid battery case into a new case for Lithium Battery is trustworthy. But, in video, no description given for viewers how to assemble. Lithium battery needs a good BMS. Wherefrom BMS is available not defined. And the battery's capacity, voltage, etc. not presented. So it is unacceptable for many.

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

    • @flappingflight8537
      @flappingflight8537 6 месяцев назад

      Also is questionable how this will perform under freezing temperatures .

  • @jusmandiy2726
    @jusmandiy2726 4 месяца назад

    Mantab proses laporannya.

  • @samanmudannayaka9604
    @samanmudannayaka9604 2 года назад +1

    This is what you normally get when you order a car battery on ebay🤣

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @ketxetacduong
    @ketxetacduong 2 года назад +3

    if you replace it with 33140 lithium battery, it will be much lighter and tastier, capacity 90 ah/h

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @giftcp82
    @giftcp82 Год назад +4

    Do you have a link to the spot welder you use?

    • @peetymcfly8871
      @peetymcfly8871 Год назад

      yes, that is indeed a nice spot welder. I too would like one.

    • @cronos1675
      @cronos1675 Год назад

      I do need that same .

  • @estegueydijo....
    @estegueydijo.... Год назад

    Many questions come to mind, does it recharge with the alternator? Does it get hot? how long does it last using headlights and electronic components in the car? does it work on winter/cold/snowy places? is it reliable for long trips... 🤔🤔

    • @albertnario4877
      @albertnario4877  Год назад +1

      it's been in my car for several months.. It did not get any issues using it... but we don't have winter.

    • @arnniemartinmarasigan1297
      @arnniemartinmarasigan1297 Год назад

      yeah we don't have winter here in Philippines, always summer and rainy season

  • @hpshigx3569
    @hpshigx3569 Год назад

    What is the cost of this battery

  • @kurk7559
    @kurk7559 Год назад

    Sir nasa magkakano po ang nagastos po nio lahat para s mga materials lang na nagamit po ninyo?

  • @mrbhatt7809
    @mrbhatt7809 2 года назад

    Bhav su 6 ?

  • @purushothampai1266
    @purushothampai1266 Год назад +1

    How to make waterproof battery?

  • @goldas2
    @goldas2 Год назад +1

    swietny pomysl -prosze o schemat polaczen-pozdrawiam

  • @CarlosRibeiro-yn6rt
    @CarlosRibeiro-yn6rt Год назад +1

    nossaaa demais ser humano e muito inteligente 🥁🥁🥁🥁

  • @paulwood2329
    @paulwood2329 2 года назад +3

    Do Not Dump the acid on the Ground! Dispose of it correctly.

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @halamkajohn
    @halamkajohn Год назад +1

    plastic inside battery can melt if soldered

  • @ALSANMAT
    @ALSANMAT 2 года назад +1

    Love it

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @alejandroobregon8619
    @alejandroobregon8619 Год назад +1

    Muy interesante la combersion, pero una versión en Español puede resultar más interesante todavía. Y las informaciones para adquirir los materiales en cuestión. Muy agradecido. Desde CDE. Paraguay.

    • @arnniemartinmarasigan1297
      @arnniemartinmarasigan1297 Год назад

      esto video hecho en Filipinas (Philippines), el persona que fabricado el batteria en video es un Filipino.

  • @larencelira1816
    @larencelira1816 2 года назад +2

    Awesome

    • @practicallab
      @practicallab 2 года назад

      ruclips.net/video/QcwfiGCd_qE/видео.html

  • @arinasan247
    @arinasan247 2 года назад +1

    Way cool!!!

  • @alexandryaruskin7072
    @alexandryaruskin7072 2 года назад +4

    И? Во сколько обошлось покупка 64 элементов и контроллера зарядки? Этот аккумулятор заведёт машину при морозе -20'С? Не проще ли сдать старый, и купить новый свинцовый?

    • @sinchrotron
      @sinchrotron 2 года назад

      А ещё проще использовать лошадь и телегу

  • @denichols9122
    @denichols9122 2 года назад +1

    It does not show the water solvable lead that is installed in the lead grids

  • @nonamedelete9132
    @nonamedelete9132 Год назад +1

    I only came to write that only legends understand the thumbnail. “Pentium inside”

  • @UliTechMobile
    @UliTechMobile 2 года назад +1

    Very educative

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @necubredatikazem
    @necubredatikazem 2 года назад +4

    Hi,perfect job.
    How much is convert in 200AH?

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @marcuscoster6529
    @marcuscoster6529 2 года назад +3

    Can you only use this battery to jumpstart the car or is it set up that the alternator can charge it like a normal car battery?

    • @Teknopottu
      @Teknopottu 2 года назад +2

      You will fry your alternator if you charge with it. Too small internal resistance. There are ways, though. Try searching "charging lithium batteries with an alternator" .

  • @nelpitogo6813
    @nelpitogo6813 Год назад

    "Lithium Inside" More like Intel inside

  • @joedelcapillan2195
    @joedelcapillan2195 Год назад

    MAG KANO PO PABUILD NG GANYAN SIR ?

  • @richardcowley4087
    @richardcowley4087 Год назад

    fire, waiting to happen

  • @martinonumero
    @martinonumero 2 года назад +1

    Good day, what are the links for the parts and devices that you used in the make?

  • @alvin8721
    @alvin8721 2 года назад +1

    hello sir can please do a regulated power supply 0-30v for small projects..

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @josenunessoaresneto7400
    @josenunessoaresneto7400 Год назад +2

    Legal amigo

  • @luigiacruz
    @luigiacruz 2 года назад

    What's that 13.3 on top? Is that in volts?

  • @dexs9661
    @dexs9661 11 месяцев назад

    Damn that’s genius how much to build me one?

  • @jehu2134
    @jehu2134 Год назад

    Could be this lithium battery a potential bomb if the temperature of the motor rise up or heat up?

  • @lightshine6044
    @lightshine6044 2 года назад +1

    can you tell me brand name & model number of spot welder ? can you give me link to buy it?

    • @rossideas5884
      @rossideas5884 2 года назад

      watch my channel if you like subscribe please ruclips.net/channel/UC6mvqw0k3A2EbIGiB3I99UA there is still a lot of interesting things ahead

  • @user-xg8mo3jm8k
    @user-xg8mo3jm8k Год назад +1

    Не проще ли новую купить?