Thanks for talking about shock tuning. Shout out to james for letting me slide into the DMs to get some reputable shock tuners in the SoCal area to help me with my suspension. Love these damn videos ☠️
Love the truck! Any advice on getting shocks for 2006 Toyota Tundra SR5 Double Cab with 8” Rough Country Lift Kit? The guy I bought it from has KYB shocks in the back but I don’t think they extend enough. Help please!
God this truck is by far my favorite truck! I’ve owned two 2000 Tundras now and my current one I’m building up to be a prerunner. It won’t be anything close to this one but I will do my best. But damn this truck is so beautiful. I just can’t say enough about this truck. 👍👍❤️🤙
Hey Terra crew what lights are up on top facing the sky looking for some my self seen on trucks out there they light up sky literally at night if you can lead me towards maker 🙏???
@@yourejustintim Yea you got it lol! This is Tundra but at the beginning you can see a 2nd gen silver Taco parked behind. They eventually covered that truck in another vid
Most CAD suspension parts look very boxy. Functionally, this is not a concern, but as someone whose building a truck from scratch you become particular. Most I beam setups are very elegant looking in comparison, with less boxy edges in the suspension design As far as buying a prebuilt truck, I understand Eric's point, but life is not just about "sending it" on camera for people on social media to see, it's also about building your own skillset. There a ton more dudes with flat brimmed hats out there who drive "prerunners" than there are folks like Jubera, who can actually build these contraptions. This should change. Lastly, committing to a long term project like building a truck and finishing it will make you a much better person, friend, husband, or whatever than just buying one and taking for granted all the time, grit, and sacrifice that went into building something spectacular.
Jesus putting 3x as much fuel that’s insane. My 01 tundra is bone stock and I burn through a tank in a week. That’s around a 150$ tank that lasts 2.3 days!
J arm Allows bigger coil-over and shock with more travel and articulation, as the shocks don't have to run the through the orfice of the UCA to meet the LCA.
Totally and completely baffling to me you used a LS1 vs a 5.7 iforce with a supercharger. The 5.7 and supercharger you could have had almost 600hp. Nice truck good job. No longer a Toyota
OMG... Build to Destroy to Build and Repeat! Not that it isn't at all true; there are TUNDRA visual body cues (2016) but besides that, is there any other aspect that you still can point to and recognize some clue; this vehicle is TUNDRA through and through?
1st gen Tundras are the best looking, coolest trucks of the last 20 years. Love 1st gens!
Some would argue they copied the f150 almost to a T
@@xavyonrosa6299 they did everything better ;), I can surely see the resemblance tho.
Not much left of the first gen here…
@@xavyonrosa6299d say its the other way around
Simply one of my favorites(as well)! What a beautiful beast! And Eric seems like a really, really cool dude!
Man I cant believe how fast it's back! Was super sad watching it wreck. But now I'm ecstatic to see it back.
Avery Gibson yeah man we got it back up so quick! A lot of late night thrashes for sure
Ohh man. It definitely looks like it though! Such a prime build. Love it. Cant wait to watch more B.T.D
Such a clean truck and great breakdown of details Terra!
Justin Costa thank you for watching! 👊
This truck is my dream truck hands down! Gotta start choppin my 01 tundra now that I got my set up
Devin Gillmore yes do it!!
@@terra-crew Got 2 more months of fab school. Then Ill start designing the bulkhead for a similar setup to Eric's truck :D
Thanks for the shout out. Great video!
Thanks for talking about shock tuning. Shout out to james for letting me slide into the DMs to get some reputable shock tuners in the SoCal area to help me with my suspension. Love these damn videos ☠️
Favorite Built to Destroy episode thus far. 🤘🏾🇺🇸
Hank Alfaro hell yeah! Thx man. Thank you for watching and the support 👊
Can we see the Ryan dude that makes that front j arm clip and his truck and or shop
@Juberafab on insta
So sick!! You Should ask these dudes how there affording these damn beasts...😂 where’s the side money coming from
Such a sick truck, Cool to see it's back going again. 🤘
Love the truck! Any advice on getting shocks for 2006 Toyota Tundra SR5 Double Cab with 8” Rough Country Lift Kit? The guy I bought it from has KYB shocks in the back but I don’t think they extend enough. Help please!
Badass Toyota Tundra number1bby
That front end conversion is a must.
Sick video & beautiful Truck,thanks for sharing brotha.🤘🏁
DSINER1 OBS life DZINER1 of course! Thx for watching
God this truck is by far my favorite truck! I’ve owned two 2000 Tundras now and my current one I’m building up to be a prerunner. It won’t be anything close to this one but I will do my best. But damn this truck is so beautiful. I just can’t say enough about this truck. 👍👍❤️🤙
What did he use to paint the interior rear door panels black? Looking to do the same in my first gen!
Was wondering if the tail lights are just plug in play for the conversion from 1st gen to second gen planning on converting my back to 16’
Hey Terra crew what lights are up on top facing the sky looking for some my self seen on trucks out there they light up sky literally at night if you can lead me towards maker 🙏???
Where are those fenders from??? They're super clean
This is what inspired me to pick up my 1st gen Tundra. Bought it with an Icon mid travel kit and 33s and going long travel with Fox and 35s soon.
Where can I get that front end
The video of him rolling it, I remember I wanted to run to him too haha
That truck is 2020 Sick!!!
2 miles to the gallon!! The dedication 😂
Something about that grey body... can’t beat it...
That 2nd Gen Taco in the back is also super clean
TACO is short for Tacoma right? This is/was a tundra?
@@yourejustintim Yea you got it lol! This is Tundra but at the beginning you can see a 2nd gen silver Taco parked behind. They eventually covered that truck in another vid
Is there a reason there isn’t many single cab Prerunner’s ?
Correct me if I'm wrong, isnt this 3rd gen since its a 2016 conversion.....?
Sooo damn BeaST...
My Hat is Off to this Tundra...Respect🤘🏽
DOPE 👌 video.. and he's definitely cool dude!
Fantastic , great job
What have u done to the engine and why did u choose a tundra ?
that man knows his truck
He does! Respect.
Most CAD suspension parts look very boxy. Functionally, this is not a concern, but as someone whose building a truck from scratch you become particular. Most I beam setups are very elegant looking in comparison, with less boxy edges in the suspension design
As far as buying a prebuilt truck, I understand Eric's point, but life is not just about "sending it" on camera for people on social media to see, it's also about building your own skillset. There a ton more dudes with flat brimmed hats out there who drive "prerunners" than there are folks like Jubera, who can actually build these contraptions. This should change.
Lastly, committing to a long term project like building a truck and finishing it will make you a much better person, friend, husband, or whatever than just buying one and taking for granted all the time, grit, and sacrifice that went into building something spectacular.
That taco in the back thooo!👀
Damn, would have liked to see the 5.7 in it not another LS...
Me too. But easy and abundant power parts kinda changes your mind.
greetings from Ecuador like ❤️🏁 good video
619 619!🤘
This is THE BADDEST street legal truck built from a production vehicle that I've ever seen.
Justin M. we agree. So sick!
Holy cow. The dream
1337 IOT same.
This is me being a Toyota but it’s a 3rd gen conversion but still a bad ass truck. Goals on my 1 gen
Old boy was talking about buying a 10k shock package and 10k rear end in the same 5 minutes 😂
The truck is beautiful
Love toyota trucks, looks awesome!
sick tundra
i have the vision but i don't have the money lol 😂😂😂
Rad truck! Damn I want to do this to my 2018 Tundra.....if i had the money. Lol
Does eric still have the GTR?
Who makes the steering wheel?
How much does it cost to build a truck like this
Whoa!!!!
sick build!
🤙
Wow!!!!
The best!
💯
LS swap! Nice!
How can i become part of the terra crew?
delinquentdesign build a clean truck and senddd ittt
Sick mannn
Update?
Dope!
Jesus putting 3x as much fuel that’s insane. My 01 tundra is bone stock and I burn through a tank in a week. That’s around a 150$ tank that lasts 2.3 days!
# 1,000 in likes is now done...
And now is a f100🤣🤘
Loved this truck till I saw the ls in it.
Why J- arm vs A-arm ?
J arm Allows bigger coil-over and shock with more travel and articulation, as the shocks don't have to run the through the orfice of the UCA to meet the LCA.
Where do people get infinite amounts of money to build this sort of rig?
3rd gen* conversion
Totally and completely baffling to me you used a LS1 vs a 5.7 iforce with a supercharger. The 5.7 and supercharger you could have had almost 600hp. Nice truck good job. No longer a Toyota
Already kinda wasnt, its a platform to build your own thing with
Badass truck but that ain’t a tundra anymore... it’s a custom.
Lost me at LS lol. No it's a amazing truck.
Mike Shelton same I was a little sad when he said LS but still sick though.
Idk this Frankenstein looking ass truck ain’t it for me lol
Ls1!? And for that reason I’m out.
Soon as I found out the 2uz was swapped out I stopped watching 😂
Soooo not a toyota...
OMG... Build to Destroy to Build and Repeat!
Not that it isn't at all true; there are TUNDRA visual body cues (2016) but besides that, is there any other aspect that you still can point to and recognize some clue;
this vehicle is TUNDRA through and through?