Thank you so much for this excellent video! Where do you get the straps/links from to change from star to delta please? And what are they called please?
awesome video demonstration. Do you have a model that would run the Compressor on a 5 ton outdoor AC Condenser. It uses a 240vac 3 phase motor. HP is around 7
Looking for a low power 3-phase supply, 1/4hp is more than plenty. Any idea if there exists today a 110V input (60hz), with a 3-phase (400hz) selectable output of either 110 or 220?
question if you can help me running a VFD with this motor I have 3hp model number EM3611T. i want to power it with a house hold 220/240 single phase power converted to 3ph 230v. the VFD from amazon i want get says it puts out 3 phase 220v not 230v? my motor is 3hp 230/460v
If the info badge on a VFD shows 220v input 220v output does this mean that only a 220v power source will run this VFD and a 115v power source cannot be used?
Sorry, I can't guide the use of VFD for any brand, because each brand's VFD setting method is different, so I suggest you check the manual that comes with the VFD.
@@sohailkashif336 Assuming that the current of the motor reaches 8A when it runs at 380V constant voltage, its power consumption is P=1.732*U*I*cosφ=1.732*380*8*0.8=4.2kW, and the power consumption is P>5HP, so this is unreasonable , the statement of 8A per phase under 380V voltage may not be true, and the motor voltage may be much less than 380V at this time. In the case of knowing the operating voltage and current of the motor, calculate the apparent power, AP=1.732*U*I. AP/(VFD input voltage) may provide an estimate of the current on the input side of the VFD. (The above is a theory, there may be omissions, for reference only)
Dear sir very helpful but I want to know that can I run my 3 phase motor which is 10 HP (7.5) kW 415 volt but only single phase 220 volt is available can I run?
@@ATOcom hi great video! I have the same problem, I have a large 10hp 3phase motor but I need to run it off my single phase supply. Is this possible to do?
@@lloydsaunders9821 ATO VFD can run your motor (pay attention to power, voltage, current), click on these two links, www.ato.com/10hp-single-phase-to-three-phase-vfd www.ato.com/15hp-single-phase-to-three-phase-vfd
Hello. Your video is very interesting. I would like to know if it is possible to use a three phase frequency regulator with a single phase motor by connecting two wires to the output of the regulator (input: single phase 220v and output: single phase 220v). thank you so much
I don't quite understand what you said. , But we have 1-phase input & output VFD, 1-phase input to 3-phase VFD, 3-phase VFD. So, which one do you need?
@@ATOcom it is 1-phase input to 3-phase output. is it possible to use the three-phase output in 1-phase ie (1-phase input 3-phase output ===> 1-phase input 1-phase output) ?
I have a two horsepower milling machine with a 2 speed 3 phase motor on it. Will a vfd work on this motor to convert household 220 power supply to run this three phase motor? Would I have to wire a separate vfd for each speed on the motor?
If you want to adjust the speed of the motor and run stably, I suggest you use a 3-phase motor + VFD (this is a common practice); but if you only have a single-phase power supply, use ATO brand single-phase to three-phase A VFD is a good choice; we don't use a single-phase motor because speed regulation is not well suited for single-phase motors.
Note, P0.00=0 (V/F control mode, PA group does not need to be set), =1 (Senseless vector control, you need to set the motor parameter group PA)
If P0.00 =0 do you still need to run AutoTune PA.00
Please write down the all settings( single phase to three phase)
If set adjustments have been made to PA, how do I rest it back stock?
@@weudhwgeduhgweyif P3.01=10
if i want to do start stop in a three phase motor what is the better way with an inverter so the motor doesnt hot with connection in triangle or star
1Ph 220V to 3Ph 400V 5HP VFD including Protection circuit is 20000Rs
I'm have the ATO vfd to run a 5hp 3ph air compressor with a pressure switch. Will the VFD work for this application?
Thank you so much for this excellent video!
Where do you get the straps/links from to change from star to delta please?
And what are they called please?
Our motor itself comes with straps/links. :)
@@ATOcom Ah brilliant. I understand now. Thank you for your helpful reply.
awesome video demonstration. Do you have a model that would run the Compressor on a 5 ton outdoor AC Condenser. It uses a 240vac 3 phase motor. HP is around 7
Yes, this link, www.ato.com/single-phase-to-three-phase-vfd
Looking for a low power 3-phase supply, 1/4hp is more than plenty.
Any idea if there exists today a 110V input (60hz), with a 3-phase (400hz) selectable output of either 110 or 220?
Thank you brother
question if you can help me running a VFD with this motor I have 3hp model number EM3611T. i want to power it with a house hold 220/240 single phase power converted to 3ph 230v. the VFD from amazon i want get says it puts out 3 phase 220v not 230v?
my motor is 3hp 230/460v
Like a slow The Office theme
Sir amar 3 phase 20 hp motor k.. Single phase kore chala tey parbo plz sir janaben
If the info badge on a VFD shows 220v input 220v output does this mean that only a 220v power source will run this VFD and a 115v power source cannot be used?
Yes,.....but we have 115V type VFD,www.ato.com/120v-vfd
nice video
Where do I find this soundtrack??
Sir can inverter settinng only suply power not aut terminal suis
Didn't understand what you said....
I mean i just want only 380v not another suiz funtion..can inverter do this?
how to add start stop bottom on this vfd?
ruclips.net/video/nBUm4i9wnzY/видео.html
Sir, can i use this vfd for three phase 380v ,2 pole & 2900rpm motor
Yes, buy it on: www.ato.com/single-phase-to-three-phase-vfd
Ok sir
Hello I need local supplier in the Philippines,
how do I add start stop bottom?
this link, ruclips.net/video/nBUm4i9wnzY/видео.html
Can i get 380 v three phase output from 220 v single phase input?
Yes, we have the VFD you need, enter ATO to check the specifications you need: www.ato.com/220v-to-380v-vfd
Hi when using a VFD to convert a single phase motor to 3 phase does it have to be wired in delta ? Thanks
If the output voltage of the VFD matches the motor, there is no problem.
Nice video but no voice to understand
Thanks your advice, ATO will improve that the next time.
VFD SE SELININGFAN KASE CHLAYE
Can I run my 3phase motor in phillipines. Though we dent have neutral. Both line is 110 n 110 total of 220 volt
Yes, ATO VFDs can do the job, maximum capacity 10hp, more info on: www.ato.com/single-phase-to-three-phase-vfd
G asa VFD ha Jo sigl fas 220emput la or three fas 10hb mother ko Rin kra
Can you kindly guide me that from any VFD which has output of 3-Phase 220V, can we handle speed control of 30V 6KW 3-Phase AC Motor with full torque?
Sorry, I can't guide the use of VFD for any brand, because each brand's VFD setting method is different, so I suggest you check the manual that comes with the VFD.
@@ATOcom can you just confirm me that have you seen any VFD which allows us to choose and then fix the output voltage via programming?
@@thghho Sorry, I haven't seen the VFD you mentioned.
Can I use this device as a frequency converter to run a washing machine?
110V/60Hz to 220V/50Hz or 220V/60Hz to 220V/50Hz
We have professional frequency converters, maybe you need it. www.ato.com/1-phase-frequency-converter
Expensive better to buy new washing machine to purchase converter
If I run 3 phase 5hp motor and input of inverter 220 how much current in input side of Vfd?
It depends on the load on the motor.
@@ATOcom if I have 5 HP 3 phase 380 volts take 8 amp each phase and run on 4 kw signal phase to 3 phase Vfd how much current input side of Vfd?
@@sohailkashif336 Assuming that the current of the motor reaches 8A when it runs at 380V constant voltage, its power consumption is P=1.732*U*I*cosφ=1.732*380*8*0.8=4.2kW, and the power consumption is P>5HP, so this is unreasonable , the statement of 8A per phase under 380V voltage may not be true, and the motor voltage may be much less than 380V at this time.
In the case of knowing the operating voltage and current of the motor, calculate the apparent power, AP=1.732*U*I.
AP/(VFD input voltage) may provide an estimate of the current on the input side of the VFD.
(The above is a theory, there may be omissions, for reference only)
Hi what would cause ohc to come in
Is it necessary to size up the Vfd twice the capacity of the motor?.
The VFD capacity is greater than or equal to the motor, but the rated current of the VFD is greater than the rated current of the motor.
Can I use this VFD to run a pentair 2hp 1PH 60 Hz 230v pool pump?
yes~,www.ato.com/single-phase-vfd
Dear sir very helpful but I want to know that can I run my 3 phase motor which is 10 HP (7.5) kW 415 volt but only single phase 220 volt is available can I run?
Do you mean: VFD input 1-phase 220V & output 3-phase 415V?
@@ATOcom hi great video! I have the same problem, I have a large 10hp 3phase motor but I need to run it off my single phase supply.
Is this possible to do?
@@lloydsaunders9821 ATO VFD can run your motor (pay attention to power, voltage, current), click on these two links,
www.ato.com/10hp-single-phase-to-three-phase-vfd
www.ato.com/15hp-single-phase-to-three-phase-vfd
Ye 3 has power moter pump pr kaam kry ga
Or price ?
If P0.00 =0 do you still need to run AutoTune PA.00
PA group not need to set, if P0.00=0
pls can i use it to run my three phase borehole pump from a single phase supply
Yes,1-phase to 3-phase VFD link, www.ato.com/single-phase-to-three-phase-vfd
@@ATOcom Thanks...
Hello. Your video is very interesting. I would like to know if it is possible to use a three phase frequency regulator with a single phase motor by connecting two wires to the output of the regulator (input: single phase 220v and output: single phase 220v). thank you so much
I don't quite understand what you said. , But we have 1-phase input & output VFD, 1-phase input to 3-phase VFD, 3-phase VFD. So, which one do you need?
@@ATOcom it is 1-phase input to 3-phase output. is it possible to use the three-phase output in 1-phase ie (1-phase input 3-phase output ===> 1-phase input 1-phase output) ?
@@salifdieme5863 Yes,
1-phase to 3-phase link, www.ato.com/single-phase-to-three-phase-vfd
1-phase input & output link, www.ato.com/single-phase-vfd
@@ATOcom ok thank you very much
I need single phase input and output 220v vfd and 7A
looks good. One question: i do not see an earth wire going to the motor. Do ATO drives have an earth connection? (i'm looking at the 5 HP model)
Yes, it has an grounding terminal.
Price
price link, www.ato.com/single-phase-to-three-phase-vfd
How much the vfd for 2.2kw 220volts 3phase motor,,,singles phase supply?
Price plz
Price link, www.ato.com/single-phase-to-three-phase-vfd
I have a two horsepower milling machine with a 2 speed 3 phase motor on it. Will a vfd work on this motor to convert household 220 power supply to run this three phase motor? Would I have to wire a separate vfd for each speed on the motor?
Urdu MA Nahi ha kayea
inverter lena hi contect bhejo
www.ato.com/single-phase-to-three-phase-vfd
Seems pretty complicated
I think I'll just buy a new motor
If you want to adjust the speed of the motor and run stably, I suggest you use a 3-phase motor + VFD (this is a common practice);
but if you only have a single-phase power supply, use ATO brand single-phase to three-phase A VFD is a good choice;
we don't use a single-phase motor because speed regulation is not well suited for single-phase motors.
@@ATOcom thanks for the comment on my....comment?
I just bought a 7.5 hp 460v 3phase planer and I'm kinda new to all this...
@@billystray7007 Aha~ If you need VFD, contact us.
@ATO Automation one would think you'd have a link to your website somewhere?
@@billystray7007
1-phase to 3-phase VFD, www.ato.com/single-phase-to-three-phase-vfd
3-phase VFD, www.ato.com/three-phase-vfd
kha se parches ka re Contact no do
Contact no do
can use this vfd to run a 4kw 3phase motor with a single phase 220v power supply?
Yes, this link, www.ato.com/7-5hp-single-phase-to-three-phase-vfd
Where can I buy one
www.ato.com/single-phase-to-three-phase-vfd
Price
Get the latest price on www.ato.com/single-phase-to-three-phase-vfd.