I’ve had a ct761 for over 5 years. It’s my go to never had any issues. So when the ct861 came out had to have it. So far I’m very pleased with it also. But still grab 761 cause don’t wanna get 861 dirty lol. Now CP has gave me a good ideal what to use 861 for & a reason to buy new brushless ratchet. Gee thanks at least my dealer will be happy
It's so much better than the 761.. I love mine. I also hope snap-on doesn't lag ass around and take forever to offer boots for them. I have the brushless 14.4 drill and screw gun. Both have been flawless so far. Honestly I'm most excited for a brushless long neck 1/4 ratchet. I use the absolute snot out of the current one and it's my go to ratchet.
The CT761 was my first 3/8 impact as an apprentice. I loved that wee gun and still love the 14.4v snap on lineup of tools. But, I've got a DCF901 and I think if I was to chose between the CT861 or a DCF903, I think it would have to be the DCF903, love the wee dewalt guns.
I like the trigger setup on the snap on. Didn't realize they had the forward and back built into there without having to use the little thumb switch thing.
Can’t go wrong with the snap on stubby. I have the brush still. One of my most used tools. Vs my other 5 impacts. Gets the job done. Love it more then my Milwaukee 12 v stubby
As far as the lights, I have a Skil PwrCore 12v impact with the "Halo" light around the anvil. Definitely my absolute favorite light on ANY power tool. Just wish the Skil was a lot stronger, it's definitely only DIY grade.
Cp I bought my ct861 2 weeks ago as soon as I saw diabolical‘s Video it was my dealers last one I think it’s great. I have been waiting for that for almost a year. Great video 👍
I ordered one of these and it should be in, in the next couple of weeks. It will be my very first Snap-on cordless tool, and we shall see if it is my last or not.
The CT861 kills it. I have new grey version and it impresses me every time i use it. I can take the lug-nuts off my 2020 F150 with this gun. The dual trigger is where its at!
The craftsman are made in the same plant as the DeWalt electric tools and actually now you can use some of the pair interchangeably from what my brother who does HVAC was showing me as he started with the craftsman line and then ventured into DeWalt and now Milwaukee. How do you like the DeWalt impact because I been kicking around the idea of picking one up because about a year ago I purchased a DeWalt bundle for spare and household use and do like the 20V lineup as I have the drill, sawzall a light and the bit driver
My M12 hex driver/hammer drill combo (2.0 battery, 4.0 battery, and charger) and stubby 3/8 impact with 2.0 battery all together weren’t as much as the CT861. I think their power tools are nice, but when they cost so much and aren’t much stronger (if they even are stronger). The only one that I do think is worth it is the ratchet, which I own in 3/8. That thing is a beast, and I love the magnetic boots they have, too.
Honestly the delay could be useful so that you don’t accidentally twist a bolt head off Sure theres a solid reason on why that is b/c I noticed the same thing with the brushless drill. Same little delay
They both are great tools just someone should buy the best that can afford if price is no object buy your favorite flavor of the week I can see where battery tool would have a advantage in doing interior work to keep thing clean that's the tip of the month
I do not have any of the Snap On battery tools but I am thinking of picking up 1 or 2 in the 14.4 volt line I have pretty much everything covered in power tools thru either DeWalt or Rigid but have become very interested in trying the Snap On power tools I have never owned one that may change soon and I do like the red or green colors I do however have plenty of the Snap On hand tools been happy with them so far time to try their power tools
If it’s built any thing like the ct761 it will last that little gun is a tank mines fell in a hydraulic tank, had a 20ft fall (those magnet boots are strong but not strong enough for a 1 1/8 socket and an adapter)
@@CPthetooladdict ok. I been researching it. With the heavy duty equipment and trucks I need the power lug nuts on semi 500ft lbs. If not over tighten and push out king pins on semi takes a lot power so I need power and durability and trying find out if I better off with different brand due battery issues with Milwaukee
I’m sure you will love the CT861. The only reason I passed on it is because I do have the CT761 and love it. The CT761 is rated to 120 ft lbs and I’ve done over 200 ft lbs with it so I have no doubt the CT861 will bring the beans.
@@CPthetooladdict just a regular torque wrench. I think I got to 200 and it failed at 205. Not really scientific. Just playing around torquing old lug nuts.
Flip a switch to change directions? What, are we stuck in the industrial revolution? Seriously the ergonomics on the SnapOn make it easy to use all day. Also, not all jobs require max torque. If I need more power I grab a bigger impact. You know kinda the same as having different length ratchets in our tool boxes.
Before the Milwaukee fanboys go crazy wetting their pants about budget - keep in mind that if you go to a big shop and see what the oldest electric tool in the shop is that’s still in daily service, it’ll be snapon.
Great video CP! Love having variety in tools. My only gripe on the Snap On cordless tools, from a usability standpoint is the lights. Drives me nuts that the lights don't have a delay off. You hit the trigger their on second your off the trigger they turn off. My Milwaukee and Dewalt/MAC power tools all stay on for a while after you release the trigger. I don't know if this has changed on the brushless models, but in the older line it is annoying.
There are actually tons off videos on this because brushed tools use a mechanical switch where ALL brushed tools use a computer controlled so not to be a dick but it's pretty much impossible to get away from the delay unfortunately. I noticed it in my m12 stubby impact all the time. I grew up using brushed tools so it messed with my timing.
Picked up the same tool a couple weeks ago. Exact same color. Green is my thing. I love it. Very powerful for the size and the toggle trigger is very convenient. Very good pick up sir!!! Also the magnetic base they have for the 14.4V line is also a great addition.
Alright cp paul from england have you seen or used a friction drill have a look on RUclips it is fucking rad how it work,s wish you had one so we all can get your opinion on it I don,t now if the friction drill bit,s work on normal drill,s or if you have to have a special drill that work,s with the friction drill bit,s have a great day buddy............😃
Congratulations on the CT861, CP!! She's a beauty and will earn you $$$$$ for a long, long time! Never a need to explain why you made a purchase, brother. If you wanted five 3/8" impacts, one for each day of the work week, then you DO IT! It's wise to have a backup tool in case of failure, too. If anyone has a problem with you having the DeWalt and the CT861, they should go watch something else or maybe spend a lillte more time working on their Furry costumes with their non-binary wacko unemployed friends.
The ct861 is a good little tool to have, if you can find it used with a battery and charger for the price that snap on sells just the gun, it’s not the power of the tool that throws it off for me but rather the 1 year warranty, I’m cool with spending more on a snap on tool because I never have to worry about buying another one specifically if it’s a tool I like but 1 year warranty? For that price it’s nuts especially when their competitors are much cheaper and the tools have more power and versatility with the different power settings and battery selection not to mention most companies are making a smaller lighter more powerful tool where is the ct861 got bigger and really didn’t increase in power, it’s a good tool no doubt and the mag battery is cool but it’s not a fair deal these days period.
My snap on guy told me not to buy snap battery tools he said there a reason he sells Milwaukee I got a couple 14.4 snap on tools I got 1/4 ratchet and a 1/4 impact and have put 4 switches in that impact but I been using Milwaukee for years haven’t had any problems I got a oil Milwaukee drill I had to replace the brushes in it a couple times I haven’t had any problems with my brushless Milwaukee tools but I use the hell out of that drill but use what you like I don’t give a damn we making money with them so use what like but I can go ahead and tell go ahead and put some diabolical grease where that battery connects to tool if you do you will thank me in about a month because if don’t you be struggling to get them battery out I don’t know what it is but every 14.4 battery get hard to come out of the tool over time and my snap on guy said put little diabolical grease on it and it will come out easy it won’t hurt the tool it won’t void your warranty
Snap on electric is such a rip off. There's no way anyone with half a brain cell could justify buying it. * I'm running yellow team with the 20v impacts. Sadly, I'm also just about to plunge into the milfucky 12v line, mainly due to their die grinder and polisher. *I so want a snap on 14.45 !!! If I had the moolah, I'd be fourteen four almost all the way.
One year on, I still lust after that Snap On.
I love the 14.4 line. The power ratchet and ct761 is my absolute go to. Nothing beats that rocker trigger.
I’ve had a ct761 for over 5 years. It’s my go to never had any issues. So when the ct861 came out had to have it. So far I’m very pleased with it also. But still grab 761 cause don’t wanna get 861 dirty lol. Now CP has gave me a good ideal what to use 861 for & a reason to buy new brushless ratchet. Gee thanks at least my dealer will be happy
Lmao you are welcome
The 861 is hard to beat. Super handy and nothing else like it.
I absolutely love it but I use it only on interior and exterior projects that keep it clean lol
It's so much better than the 761.. I love mine. I also hope snap-on doesn't lag ass around and take forever to offer boots for them. I have the brushless 14.4 drill and screw gun. Both have been flawless so far. Honestly I'm most excited for a brushless long neck 1/4 ratchet. I use the absolute snot out of the current one and it's my go to ratchet.
Killer video have had my ct861 for 3 weeks now and am not disappointed
I love my snap on impact. I use it literally every single day, I don't know what I would do without it. That and my long neck 3/8 ratchet in 14.4v!
Whos struggling on 10mm bolts with a 3/8 please show me lmao
@@jeremydawkins8399 😂10mm please, your funny
The CT761 was my first 3/8 impact as an apprentice. I loved that wee gun and still love the 14.4v snap on lineup of tools. But, I've got a DCF901 and I think if I was to chose between the CT861 or a DCF903, I think it would have to be the DCF903, love the wee dewalt guns.
I like the trigger setup on the snap on. Didn't realize they had the forward and back built into there without having to use the little thumb switch thing.
761 has the same trigger
Can’t go wrong with the snap on stubby. I have the brush still. One of my most used tools. Vs my other 5 impacts. Gets the job done. Love it more then my Milwaukee 12 v stubby
As far as the lights, I have a Skil PwrCore 12v impact with the "Halo" light around the anvil. Definitely my absolute favorite light on ANY power tool. Just wish the Skil was a lot stronger, it's definitely only DIY grade.
I use air mostly under car..but cordless underhood =less risk on paint damage ..cordless priceless.
Smart man!!
I agree 👍🏽
I think eventually you could have a "clean box" with tools for interior work only. It's a great excuse to get another box. Love the channel BTW!
I bought one last week. I have two 761. But that new 781 is tough little beast. I did an entire replacement on a f250 with it.
Heck ya it is!!
I was reluctant to buy the 761 "it's a small gun" I said but I use it more than the bigger guns
The trigger is awesome I have the ct761 and it is my go to over my Milwaukee even though the Milwaukee has more power .
Cp I bought my ct861 2 weeks ago as soon as I saw diabolical‘s Video it was my dealers last one I think it’s great. I have been waiting for that for almost a year. Great video 👍
I ordered one of these and it should be in, in the next couple of weeks. It will be my very first Snap-on cordless tool, and we shall see if it is my last or not.
Still waiting on mine, ordered a Hi-viz two or three weeks ago. Hopefully next week it'll be in.
The CT861 kills it. I have new grey version and it impresses me every time i use it. I can take the lug-nuts off my 2020 F150 with this gun. The dual trigger is where its at!
The craftsman are made in the same plant as the DeWalt electric tools and actually now you can use some of the pair interchangeably from what my brother who does HVAC was showing me as he started with the craftsman line and then ventured into DeWalt and now Milwaukee. How do you like the DeWalt impact because I been kicking around the idea of picking one up because about a year ago I purchased a DeWalt bundle for spare and household use and do like the 20V lineup as I have the drill, sawzall a light and the bit driver
I love the dewalt impacts they are awesome
@@CPthetooladdict which 3/8 gun do you have? What's the part number?
My M12 hex driver/hammer drill combo (2.0 battery, 4.0 battery, and charger) and stubby 3/8 impact with 2.0 battery all together weren’t as much as the CT861. I think their power tools are nice, but when they cost so much and aren’t much stronger (if they even are stronger). The only one that I do think is worth it is the ratchet, which I own in 3/8. That thing is a beast, and I love the magnetic boots they have, too.
Definitely not wrong it's all in what's in your budget!!
@@CPthetooladdict apsaultly cp buy what you can afford and don,t get into debt it,s not worth it
I one time searched for a bolt for 10 minutes til I realised it was stuck to my mag base on my ratchet xD dang ol snappy magnets are stronnggg
They are no joke lol
I haven't seen the snap on green before I like it great video cp
Honestly the delay could be useful so that you don’t accidentally twist a bolt head off Sure theres a solid reason on why that is b/c I noticed the same thing with the brushless drill. Same little delay
I got to use one last weekend and I loved it didn't know about the magnetic battery thing grate idea
I'm not biased to impacts only got one requirement work when I pick it up
They both are great tools just someone should buy the best that can afford if price is no object buy your favorite flavor of the week I can see where battery tool would have a advantage in doing interior work to keep thing clean that's the tip of the month
I bought two and I have the 761 just cause the 14.4 kicks ass
Finally Finally just got mine long time waiting.
I'm thinking about switching over u have me convinced
Both the CT and the Dewalt have their place
💯
I do not have any of the Snap On battery tools but I am thinking of picking up 1 or 2 in the 14.4 volt line I have pretty much everything covered in power tools thru either DeWalt or Rigid but have become very interested in trying the Snap On power tools I have never owned one that may change soon and I do like the red or green colors I do however have plenty of the Snap On hand tools been happy with them so far time to try their power tools
If it’s built any thing like the ct761 it will last that little gun is a tank mines fell in a hydraulic tank, had a 20ft fall (those magnet boots are strong but not strong enough for a 1 1/8 socket and an adapter)
I need clean tools for working on RVs
This thing is no joke not a fan boy my any means but that 861 is a damn good impact
Good video question is 3/4 snap on equilateral to the 1/2 Milwaukee high torque just woundering
Not sure
@@CPthetooladdict ok. I been researching it. With the heavy duty equipment and trucks I need the power lug nuts on semi 500ft lbs. If not over tighten and push out king pins on semi takes a lot power so I need power and durability and trying find out if I better off with different brand due battery issues with Milwaukee
What did you pay for the snap on impact kit?
I’m sure you will love the CT861. The only reason I passed on it is because I do have the CT761 and love it.
The CT761 is rated to 120 ft lbs and I’ve done over 200 ft lbs with it so I have no doubt the CT861 will bring the beans.
Thats interesting I couldn't ever get one to do over 170.. did you use a torque wrench or a skidmore?
@@CPthetooladdict just a regular torque wrench. I think I got to 200 and it failed at 205. Not really scientific. Just playing around torquing old lug nuts.
@@asmautollc Ct761 is good enough.. not worth the upgrade. All you'd be doing is spending more money for nothing .
Nice, I like it
Thanks for sharing CP 👍
You don’t have to justify your tool acquisitions CP, at least not to us, because you’re preaching to the choir !!! Lol
Hell ya full addiction in effect!!! Lol
@@CPthetooladdict ha cp you are a full on tool addict if it get,s to bad we will have to put you into therapy ha ha ha ha ha 😃😄😄😄😄😄😁
Like that jdtco battery boot 😁
As a former Snap-on repair center tech of 20 years, go with the Dewalt. Better built and support for parts and NOT overpriced.
Need more info then just that
Hey CP! Keep up good work, since ya the man to know rebrands! Do ya by chance know who makes those new snap-on flex magnetic rails?!
Not yet but I will look into it
De snapon brushless is it availabe in a 1/4?
Not yet
It is now
Flip a switch to change directions? What, are we stuck in the industrial revolution? Seriously the ergonomics on the SnapOn make it easy to use all day. Also, not all jobs require max torque. If I need more power I grab a bigger impact. You know kinda the same as having different length ratchets in our tool boxes.
CP! WHAAAAAAAAAAHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
CP, nice vid but I don’t think I can afford a clean tool, interior only tool, etc 😎
More side work my friend lol
Is the snap on brushless?
Yes it is!!
Before the Milwaukee fanboys go crazy wetting their pants about budget - keep in mind that if you go to a big shop and see what the oldest electric tool in the shop is that’s still in daily service, it’ll be snapon.
Word up!!!!
Great video CP! Love having variety in tools. My only gripe on the Snap On cordless tools, from a usability standpoint is the lights. Drives me nuts that the lights don't have a delay off. You hit the trigger their on second your off the trigger they turn off. My Milwaukee and Dewalt/MAC power tools all stay on for a while after you release the trigger. I don't know if this has changed on the brushless models, but in the older line it is annoying.
I’ve noticed all brushless snap on tools have a terrible delay and response time. Especially compared to Milwaukee which is what I own
It's all brushless tools because of the triggers Milwaukees are just as bad
@@CPthetooladdict I personally have a different experience. But I’ve only ever used snap on and Milwaukee. And snap on always seems delayed
There are actually tons off videos on this because brushed tools use a mechanical switch where ALL brushed tools use a computer controlled so not to be a dick but it's pretty much impossible to get away from the delay unfortunately. I noticed it in my m12 stubby impact all the time. I grew up using brushed tools so it messed with my timing.
the green ones have more torque
I'm into long walks on the beach candle light dinners and cuddling in front of fire.
Lamo
Picked up the same tool a couple weeks ago. Exact same color. Green is my thing. I love it. Very powerful for the size and the toggle trigger is very convenient. Very good pick up sir!!!
Also the magnetic base they have for the 14.4V line is also a great addition.
Alright cp paul from england have you seen or used a friction drill have a look on RUclips it is fucking rad how it work,s wish you had one so we all can get your opinion on it I don,t now if the friction drill bit,s work on normal drill,s or if you have to have a special drill that work,s with the friction drill bit,s have a great day buddy............😃
I will check it out mate you have a great day as well!!
Cp you are a full on tool addict no joke we will have to put you into therapy ha ha ha ha😋😆😆😆😆😆 Paul from england
Haha I got the same one that's the only color that came in haha 😄
I just texted my Snap On guy to order me one.
Heck ya she's a gem
Got rid of the milwaukee stubby? WTH
Yep traded it for the dewalt best decision I made
I got rid on mine too.. it's too fat
I got the high viz I told diabolical I’d trade for the red
Extremely funny video
👍
Man dewalt bends over snapon. The only thing snapon has is the trigger and that’s it. Way underpowered
cp! what up yo!
Congratulations on the CT861, CP!! She's a beauty and will earn you $$$$$ for a long, long time!
Never a need to explain why you made a purchase, brother. If you wanted five 3/8" impacts, one for each day of the work week, then you DO IT! It's wise to have a backup tool in case of failure, too. If anyone has a problem with you having the DeWalt and the CT861, they should go watch something else or maybe spend a lillte more time working on their Furry costumes with their non-binary wacko unemployed friends.
Thansk Dave you are a great guy and a true inspiration!!
The ct861 is a good little tool to have, if you can find it used with a battery and charger for the price that snap on sells just the gun, it’s not the power of the tool that throws it off for me but rather the 1 year warranty, I’m cool with spending more on a snap on tool because I never have to worry about buying another one specifically if it’s a tool I like but 1 year warranty? For that price it’s nuts especially when their competitors are much cheaper and the tools have more power and versatility with the different power settings and battery selection not to mention most companies are making a smaller lighter more powerful tool where is the ct861 got bigger and really didn’t increase in power, it’s a good tool no doubt and the mag battery is cool but it’s not a fair deal these days period.
Just picked one up today off the rape truck
My snap on guy told me not to buy snap battery tools he said there a reason he sells Milwaukee I got a couple 14.4 snap on tools I got 1/4 ratchet and a 1/4 impact and have put 4 switches in that impact but I been using Milwaukee for years haven’t had any problems I got a oil Milwaukee drill I had to replace the brushes in it a couple times I haven’t had any problems with my brushless Milwaukee tools but I use the hell out of that drill but use what you like I don’t give a damn we making money with them so use what like but I can go ahead and tell go ahead and put some diabolical grease where that battery connects to tool if you do you will thank me in about a month because if don’t you be struggling to get them battery out I don’t know what it is but every 14.4 battery get hard to come out of the tool over time and my snap on guy said put little diabolical grease on it and it will come out easy it won’t hurt the tool it won’t void your warranty
Meh
The best is what you can afford.
I can afford both!! Lol
@@CPthetooladdict same my brother same! My tool collection is no where near yours but my addiction is strong hahaha
Snap on electric is such a rip off. There's no way anyone with half a brain cell could justify buying it. *
I'm running yellow team with the 20v impacts.
Sadly, I'm also just about to plunge into the milfucky 12v line, mainly due to their die grinder and polisher.
*I so want a snap on 14.45 !!! If I had the moolah, I'd be fourteen four almost all the way.
Thanks for wasting your breath and adding zero value to the comment section. 🙂
@@CPthetooladdict Thank you for your response. I was 7 beers in when I wrote it.
First
We're did you get magnet 🧲?
Snap-on