Brilliant!!!! I've had this model sitting on my shelf for years waiting to be built and this has really been an inspiration for me to get it out and work on it.
Hi buddy, I just found your channel fantastic work. Your GMC is awesome; thank you for sharing, mate. I've subscribed to your channel, keep up the fantastic work. Cheers Gary 🇬🇧
Thank you for your comment ! Many of them were sold to civil after the WWII and I found one which still use by a truck tires company near my home. It is fully painted in red but it it the same...
Hello mr. Dark!boy! There is so much detail on this ww2 icon.i love your passion 4detail and how u handle the pe stuff.thank u for delivering fun excitenes and Inspiration and knowledge.with best regards and sticky greetings from Brandenburg/germany.your modellmate.christian
Just discovered your channel. So glad I did, amazing attention to detail. The weathering of the decals was something I've never seen been for . Keep up the great work . ✌🇨🇦✌
Suburb work, weathering, detailing is spot on.. decal chipping was awesome .. just getting back into model builds after many, many years absent.. new subscriber also
Great build, really enjoy watching your stuff, was wondering if you could tell me or post a link to the brand and model tweezer and glue applicator you use? Again, great work!
Many thanks for your comments ! Concernant the tweeters I use I found it on amazon. For the glue, it is tamiya extra thin glue for the plastic, for instant glue, it comes from the supermarket.
Many thanks for your comments ! I use the one from tamiya and it is very a Good quality side cutters but of course a bit expensive. I think it is very important to have good tools to work confortable.
@@DarkSideModeler I think you mis understood my question. I was referring to the little wax tipped tool you were using to pick up the p e parts. Do the actually work. Is it worth the $$$
Oh sorry ! Yes it works. It exists diffrent size but with a medium one, I do all what I want. Many people said me that it will not « glue » very fast due to the dust and they are true but if you wet it a bit before using, it works perfectly ! It comes from Aliexpress and so it is cheap!
Dommage de faire les vidéos systématiquement en anglais ! Tous les maquettistes de l'hexagone ne maîtrise pas cette langue et je pense qu'il serait judicieux de penser un peu plus à eux !
C'est vrai mais les anglophones représentent la plus large communauté. Cela dit, je pense faire dans le futur soit des versions françaises soit des version sous titré. cela dit, c'est rare quand je parle...
@@DarkSideModeler Merci pour votre réponse ! Il est évident que la communication en anglais est plus importante mais ne serait-il pas plus judicieux de se faire réellement un nom dans son pays d'origine avant de penser à l'international ? Ceci étant dit, vos réalisations sont belles et votre travail intéressant !
Pour être honnète je ne cherche pas vraiment à me faire un nom. Je partage mon travail sans stratégie. Il est vrai que j'ai l'habitude de travailler (dans la vie) en anglais du coup c'est venu assez naturellement. Mais je pense que vous avez certainement raison et que je devrais produire plus pour la communauté Francophone.
C’est vrai mais je connais plus de modélistes anglophones. Cela dit, je prévois de les faire aussi en Français si la chaîne prend plus d’ampleur. Sinon je rajouterai des sous titres
Brilliant!!!! I've had this model sitting on my shelf for years waiting to be built and this has really been an inspiration for me to get it out and work on it.
Many thanks for your comment !
小学生のときコンバットが流行ってかなり戦車や装甲車でジオラマ作ってました懐かしい!
Hi buddy, I just found your channel fantastic work. Your GMC is awesome; thank you for sharing, mate. I've subscribed to your channel, keep up the fantastic work. Cheers Gary 🇬🇧
Many thanks for your comment !
I don't do military kits, but this is one gem of a model and the photo-etch is really making it pop!
Thank you for your comment ! Many of them were sold to civil after the WWII and I found one which still use by a truck tires company near my home. It is fully painted in red but it it the same...
Fantastic work!! Just got back into the hobby, looking for some new skills...I just found a great new resource!!
Thank you very much
Hello mr. Dark!boy! There is so much detail on this ww2 icon.i love your passion 4detail and how u handle the pe stuff.thank u for delivering fun excitenes and Inspiration and knowledge.with best regards and sticky greetings from Brandenburg/germany.your modellmate.christian
Thanks again !
That's a really nice PE set for that kit
Just discovered your channel. So glad I did, amazing attention to detail. The weathering of the decals was something I've never seen been for . Keep up the great work . ✌🇨🇦✌
A very nice build.
Many thanks for your comment !
P.o.l Platoon truck, nice work mate
Thanks
Another great build video. You must have the steadiest hands 🙌 I’ve seen on RUclips
Thank you very much !
Truck models are cool
I am agree!
The engine is a work of art
fantastico bravo
many thanks for your comment !
Simply outstanding !! Found this today and subbed....very nice music as well.
Love the music on his videos !!!
Nice build. Very nice indeed.
Many thanks for your comment !
I do like the model...and the meticulous work, superb!
I made 4 of this Tamiya models in 4 deferent versions. One had dual front wheels like some of the trucks in WW2.
I saw a picture with 20 mm canon on réarrange part. I would like to do it. Do you have any reference on it?
@@DarkSideModeler no not really. I saw one on E-Bay tho. I want the 352 cckw ones. They are shorter beds than the CCKW 6x6.
Just discovered you channel and subscribed. Looking forward to seeing more of your work
Great video. Got lots of ideas from it. Thanks 👍
Many thanks for your comments !
Outstanding built keep up the good work
Nice job.
Many thanks !
very well explained video for the construction of this truck. And very good tips. congratulations
👍👍👍
Many thanks!
Amazing build. Just amazing. Subbed.
Many thanks!
Just found your channel,learning new skills
how do you stick eduard brass to plastic modeling
With CA glue
Outstanding
Thanks !
Like the video very much .Hope there more .Take care
Thank you ! The next video will be the Jeep willis "front line transmission car". the video is nearly ready and I hope you will like !
@@DarkSideModeler Thanks will look out for new video.
Good job
Thank you very much !
I"ve never seen such a great video in my life I wish you prosperity
형제 친하게 지내봅시다.
👍👍
Pretty impressive, engine detailing was superb, keep up the good work, inspiring.
Hi. May I ask if the kit came with the overhead .50 cal?
Love it
After seeing your work , I had to sub your channel. Awesome job. Model on , Sir.👍
Thank you !
just found your channel loved the video keep up the good work
Many thanks for your comment !
Suburb work, weathering, detailing is spot on.. decal chipping was awesome .. just getting back into model builds after many, many years absent.. new subscriber also
Many thanks and welcome on the channel !
What PE kit did you use or was it scratch built (hinges etc) amazing detail👌🏼
Thanks for your comment ! In fact both. P-E kit from Eduard and Tamiya and a bit of scratch built
Just a comment for the algorithm
Thank you Robert !
Awesome work!
Great build, really enjoy watching your stuff, was wondering if you could tell me or post a link to the brand and model tweezer and glue applicator you use? Again, great work!
Many thanks for your comments ! Concernant the tweeters I use I found it on amazon. For the glue, it is tamiya extra thin glue for the plastic, for instant glue, it comes from the supermarket.
I can’t get those inner fenders to line up for nothing. It’s the Bofors gun kit, bit looks the same.
Wow great job
What make are the side cutters you use? They look really sharp. Love your modelling skills.
Many thanks for your comments ! I use the one from tamiya and it is very a Good quality side cutters but of course a bit expensive. I think it is very important to have good tools to work confortable.
@@DarkSideModeler thank you for the information, I will have a look at them, do you know which model number yours is?
Oh no… it is so long time I use it that I forgot the reference…
Nice work!
Can I ask what colour you painted the seats in 39.54? Super build by the way.....
Thank you ! The Color is khaki from vallejo.
@@DarkSideModeler ....thank you.....
@@r199ers I found the complete reference : So Vallejo Game air 72.761. th color modulations have been made with this color for the basis.
Good job. What kind of glue did you use for the photoetched parts?
Many thanks ! I use cyano acrylate glue
@@DarkSideModeler Thanks for the reply.
Does the small PE tool actually work?
I've heard mixed comments about it
No of course. but it give more value to the model.
Moreover, it's so small that I spend a lot of time to work on it (and I didn't use all of them)
@@DarkSideModeler
I think you mis understood my question. I was referring to the little wax tipped tool you were using to pick up the p e parts.
Do the actually work. Is it worth the $$$
Oh sorry ! Yes it works. It exists diffrent size but with a medium one, I do all what I want.
Many people said me that it will not « glue » very fast due to the dust and they are true but if you wet it a bit before using, it works perfectly !
It comes from Aliexpress and so it is cheap!
The rest of the truck is to clean for that much wear on stars and wind screen is too neat needs some fine tuning all round
PRACHTIG !!!!
Dommage de faire les vidéos systématiquement en anglais !
Tous les maquettistes de l'hexagone ne maîtrise pas cette langue et je pense qu'il serait judicieux de penser un peu plus à eux !
C'est vrai mais les anglophones représentent la plus large communauté.
Cela dit, je pense faire dans le futur soit des versions françaises soit des version sous titré. cela dit, c'est rare quand je parle...
@@DarkSideModeler Merci pour votre réponse ! Il est évident que la communication en anglais est plus importante mais ne serait-il pas plus judicieux de se faire réellement un nom dans son pays d'origine avant de penser à l'international ?
Ceci étant dit, vos réalisations sont belles et votre travail intéressant !
Pour être honnète je ne cherche pas vraiment à me faire un nom. Je partage mon travail sans stratégie. Il est vrai que j'ai l'habitude de travailler (dans la vie) en anglais du coup c'est venu assez naturellement.
Mais je pense que vous avez certainement raison et que je devrais produire plus pour la communauté Francophone.
Pourquoi en anglais ? Le français c'est bien aussi, non ?
C’est vrai mais je connais plus de modélistes anglophones. Cela dit, je prévois de les faire aussi en Français si la chaîne prend plus d’ampleur. Sinon je rajouterai des sous titres